AbstractThe importance of good construction planning affects the final costs of the production and the timing of the project. Planning for building projects has been studied with the aim of identifying how three week planning appears in the construction industry today.A case study has been conducted in Navisworks Simulate to assess whether the software is suitable to connect the task schedule with the BIM model to create a 4D model. 4D models are used for performing 4D construction simulation to visualize the project. In order to use the benefits of the model, investment in equipment and software is required. This means higher costs for the companies.

The aim of this paper was to describe hindering and facilitating factors in the transition from upper secondary school and employment for a person with Asperger?s syndrome. In the process we used general systems theory and made semi-structured interviews with five persons in the network of institutions and associations working with the individual. Our findings showed that the hindering and facilitating factors were basically the same depending of the environmental adjustments. The interviews highlighted the following factors: the recent general unemployment rate in Sweden, selfawareness of the individual and the surrounding environment?s knowledge of the individual?s impairment in relation to Asperger?s syndrome.

AbstractMatchmaking on an organisational level? about co-operation between municipal introduction-units and voluntary organisationsEssay in Political Science D, by Rebecka Johansson, spring 2006The aim of this study is to examine co-operation between municipal introduction-units, which work to integrate newly arrived immigrants and refuges, and voluntary organisations in Sweden. The essay is a comparative case study which examines three local authorities and the main questions are;- Do voluntary organisations constitute a functioning co-operation partner to the municipal introduction-units? Are there conditions for future co-operation?The answer to the questions is that there are no, or rarely any, co-operation between voluntary organisations and municipal introduction-units. It is difficult to judge whether there are conditions for future co-operation.

AbstractThe importance of good construction planning affects the final costs of the production and the timing of the project. Planning for building projects has been studied with the aim of identifying how three week planning appears in the construction industry today.A case study has been conducted in Navisworks Simulate to assess whether the software is suitable to connect the task schedule with the BIM model to create a 4D model. 4D models are used for performing 4D construction simulation to visualize the project. In order to use the benefits of the model, investment in equipment and software is required. This means higher costs for the companies.

Title: Management control of facility efficiency in municipalities - A case study of Halmstad municipalityLevel: BachelorSeminar date: 2012-05-31Authors: Markus Nilsson & Sara MattssonAdvisor: Sven-Ola CarlssonKey words: Control management in municipality, facility efficiency, management by objectives, internal rents and incentivesBackground: The public sector owns and manages a large property portfolio and in the municipalities, the properties are always a big cost item. Because of the outside world changes and the public interest, the properties should be used as efficiently as possible.Purpose: The purpose of this paper is to describe how control management of facilities looks like a municipality. The paper also seeks to explain how employees work to make the facilities more efficient in a municipality.Methodology: The authors use a qualitative method with open interviews.Theoretical perspectives: The choice of theory was made with the field of management control and facility efficiency in mind. The theory therefore includes management by objectives, internal rents and reward systems, motivation and communication within organizations.Empirical foundation: The organization has undergone a reorganization 2010/2011. There are no clear incentives to reduce facility costs.

The annual demands for forest fuels increases in Sweden. At present, large unutilized biomass resources is found in young, dense forests from which about five million oven-dry tonnes (ODt) (23 TWh) could annually be extracted as forest fuel. But harvesting small trees give high logging costs and new cost-efficient harvesting techniques are therefore required. The aim was to study the productivity of Vimek 608 BioCombi in forest fuel thinning of Lodgepole pine and to calculate the economy of the harvesting and estimate the thinning quality. The time study was performed in Åmarken in the county of Västerbotten.

This thesis has been done in collaboration with Peab Stockholm Building 3, which is a region within the Peab Sverige AB. The report is based on a survey and studies of Peab business management systems and production literature. For general information gathering has literature from well-known sources collected in libraries and through the Internet. It shows through the work that Peab has routines for experience feedback in the construction process, but that these procedures work in a small scale and the practical work experience feedback does not work at all. This is also something the construction industry in general also perceived as problematic. The questions in the report are of a wide scale and concerns construction errors cost, how the employees perceive that the company takes advantage of the skills and the mental stress in production line. The goal is to find how Peab Stockholm Building 3 will work on the experience feedback to allow for better productivity. In conclusion, the report author tries to demonstrate what can lead to increased productivity and improved work experience..

This bachelor thesis includes two different manuals and design of an interface box between a test object and a general test station (computer) with ARINC429 communication.There are three different purposes with this project:The first is to setup a general test station with ARINC429 communication using a communications card from DDC (DD-42916i3-300) and software from Ampol Technologies (dataSIMS).The second is to design a new interface between the test computer and the test object. As well as implementing two components in the equipment.The third is to write two separate manuals to guide the users of this equipment. There are two different kinds of users of this equipment, technicians and system engineers. Technicians use the equipment to test and repair flight components. System engineers will implement new components in the equipment.The result of this project is a working test station with a new interface and two manuals..

The aim of this thesis is to investigate indexing consistency in LIBRIS, a Swedish national union catalogue, where searches can be carried out among almost five million titles. To calculate consistency, indexing terms of translations and indexing terms of documents in their original language have been compared. I have used a total of 100 such pairs in the study. There is a lot of different methods that can be used when consistency is calculated, in this study Hoopers and Rollings methods have been used since they are two of the most commonly methods used and also have the advantage of being fairly simple to use and understand. In the thesis, differences in consistency between indexing terms consisting of names and general indexing terms and differences in consistency between controlled indexing terms and uncontrolled indexing terms are also compared.

This BSc thesis is an introductory step to the collaboration between the Swedish zoo Skansen and Kenya Wildlife Service (KWS). It constitutes of an inventory of the Nairobi Animal Orphanage (AO), a facility that cares for injured and abandoned wildlife species in Kenya. Through the cooperation with Skansen, the KWS will improve their management of the AO. The aim of the inventory and BSc theses is to evaluate the management of black-backed jackal (Canis mesomelas), lion (Panthera leo) and patas monkey (Erythrocebus patas) regarding their biological needs. The general enclosures, routines and feeding at the AO are also evaluated since they have a great influence on the management of captive animals.

SAAB Automobile ABis a car manufacturer within General Motors corporate group. SAABAutomobile ABhas a big part of the responsibility for the brake development in the corporategroup. The car industry is facing harder environmental requirements, which influence the brakedevelopment. The focus is to develop brakes with low drag and sustained brake feeling andperformance. Important characters for the brake caliper are high stiffness and low weight, highstiffness results in high performance and low weight is important because it is unsprung mass.This thesis investigates the possibility to improve the performance of the brake caliper for aGMproject.

The purpose of this thesis is to describe property definition and special boundary demarcation and to analyze the differences between the two cadastral procedures. Property boundaries, especially unlawfully determined boundaries created through unofficial parcelling, can create conflicts between landowners and make it diffi-cult to know which land that a property contains of. It is possible to clarify the boundary conditions through a property definition or through a special boundary demarcation re-establish boundary marks.The methods used are: (1) A literature review to collect background information, (2) A case study to summarize court cases and (3) A questionnaire study to collect opinions from cadastral surveyors.The result is summarized in two comparisons. Firstly between restoration of landmark and special boundary demarcation (which replaced restoration of landmark in a legislative change in 2010), which demonstrated that the change in the law is considered positive because special boundary demarcation gives a legal effect on the boundaries. Secondly between property definition and special boundary demarcation which demonstrated that the two procedures are similar to each other.

Background: The standard of living should be the same for everyone, whether the apartment is placed in an old or new building. The residential properties that were built from 1965 until 1974 is now beginning to become old and in need of restoration. The financial crisis during the nineties contributed to the lack of maintenance on the buildings in Sweden. As the public buildings gets older more and more defects occurs. The coordination and maintenance will therefore have a more significant role in the housing company ?s work.The increasing interest about how old a building can be, attract much attention.

This report discusses the development of lessons based on laborations for middle and high school.The purpose of the project was to research the possibility to affect students' attitude towards physicsthrough well-planned stimulating lessons. The lessons were based on the Light and Lasers OutreachKit, a teaching package made by the organisation Laser Classroom, and have been adapted for physicsin middle and high school. The lessons were developed on a pedagogical and didactical ground andwere improved with surveys and peer and self assessment. The lessons were based on laser light and itsproperties. One lesson covered the topic of single-slit diffraction, while the other treated geometricaloptics.

This report discusses the development of lessons based on laborations for middle and high school.The purpose of the project was to research the possibility to affect students' attitude towards physicsthrough well-planned stimulating lessons. The lessons were based on the Light and Lasers OutreachKit, a teaching package made by the organisation Laser Classroom, and have been adapted for physicsin middle and high school. The lessons were developed on a pedagogical and didactical ground andwere improved with surveys and peer and self assessment. The lessons were based on laser light and itsproperties. One lesson covered the topic of single-slit diffraction, while the other treated geometricaloptics.