This is a dissertation for a Bachelor Degree Project at the University of Skövde. The project is carried out in cooperation with the company Kinnarps AB.The objective of this project was to develop a new chair for café and lunch rooms, which should satisfy the markets expectations and demands and match Kinnarps AB?s assortment today. The project has contained everything from identification of user and customer needs and requirements to evaluation and building of a prototype.The result is a chair with a frame of tubular steel and there is nothing like it in Kinnarps AB?s assortment today.

This degree project illustrates newsprint and waterless offset. A new news press was introduced at Drupa-00, Cortina from KBA, which is the first news press dedicated the waterless technique. With actual statistics from the company in question an investigation was made whether their production fits this press. It came out in the investigation that the production of the company, from statistics, fits this press very good. A table was made where different timeschedules were accounted for the new press, with semi- and full automatic plate changing for present and to be added papers.

In this diploma work the approach of determining the required amount of reinforcement in slabs exposed to pure tension is processed, on behalf of Ramböll Uppsala. It is a well-known problem in the industry that there are uncertainties in the determining of the amount of crack reinforcement, especially for structures exposed to pure tension. Cracking caused during the time of dehydration in concrete slabs is the most common defect according to statistics made by CBI[1], which provides numbers as high as 35 % of all the defects caused on slabs are generated by cracks. Comparisons between Sweden's former national standard BBK 04, Building Regulations for concrete structures due to restrained forces of shrinkage, and the current European standard Eurocode 2 are carried out through theoretical studies and concludes with several examples of calculations. Rigorous calculations of both standards, BBK 04 and Eurocode 2 with application of the national annex in Sweden and Denmark are performed.

Denna rapport beskriver arbetet med utvecklingen av en ny modell för kaplanturbiner. Utvecklingen bygger på två kopplade differentialekvationer som under arbetets gång anpassats och implementerats i turbinmodellen.Modellen beskriver hur vattenflöde och turbinmoment påverkas av avvikelsen från den optimala kombineringskurvan för vinklarna på turbinens ledskena och löphjul, och är anpassad för ett referensaggregat med tillgängliga provdata. Även övriga enheter i vattenkraftaggregatet modelleras och sätts samman med frekvensregulator och elnät för att simulera aggregatets reglerstabilitet i önätsdrift.Verifieringen av turbinmodellen sker genom försök att återskapa de befintliga verkningsgradskurvorna med hjälp av modellen. Resultatet visar en god följning av de verkliga kurvformerna, dock med något lägre maximal verkningsgrad.Verifieringen av önätmodellen sker genom att prova stabiliteten i nätfrekvens och turbineffekt vid stegpålastningar. Resultatet ger en stabilare reglerstabilitet än i verkligheten, men uppfyller ändå förväntningarna på en fungerande modell.This report describes the development of a new kaplan turbine model.

Cameraria ohridella, the chest-nut leaf miner, is a new pest in Sweden. These moths make leaf mines on chest-nut trees, preferably on Aesculus hippocastanum, which results in brown blotches on the foliage and early loss of leaves. Since the first observation in Macedonia in 1985 it has spread rapidly through Europe. The moth arrived in Sweden in 2003 when it was observed in Malmö and surrounding areas. In this paper a literature study describes the morphology and life cycle of the chest-nut leaf miner. Further more a test with pheromone traps examining the number of generations in Sweden is shown.

Antalet kretskort som monteras i multikortssystem, till exempel telekommunikationssystem, ökar ständigt. Samtidigt som ytmonteringstekniken och packningstekniken blir allt bättre utvecklas även tillverkningsmetoderna för olika integrerade komponenter, vilket medför att varje kretskort rymmer allt fler integrerade komponenter. Detta gör att testning av integrerade komponenter och multikortsystem blir alltmer komplex. En förutsättning för att kunna genomföra effektiv testning är standarder. Standarder över hur testning ska genomföras medför att en komponent som uppfyller kraven från en standard är direkt utbytbar mot en komponent från en annan tillverkare som uppfyller kraven från samma standard.

Denna rapport beskriver arbetet med utvecklingen av en ny modell för kaplanturbiner. Utvecklingen bygger på två kopplade differentialekvationer som under arbetets gång anpassats och implementerats i turbinmodellen.Modellen beskriver hur vattenflöde och turbinmoment påverkas av avvikelsen från den optimala kombineringskurvan för vinklarna på turbinens ledskena och löphjul, och är anpassad för ett referensaggregat med tillgängliga provdata. Även övriga enheter i vattenkraftaggregatet modelleras och sätts samman med frekvensregulator och elnät för att simulera aggregatets reglerstabilitet i önätsdrift.Verifieringen av turbinmodellen sker genom försök att återskapa de befintliga verkningsgradskurvorna med hjälp av modellen. Resultatet visar en god följning av de verkliga kurvformerna, dock med något lägre maximal verkningsgrad.Verifieringen av önätmodellen sker genom att prova stabiliteten i nätfrekvens och turbineffekt vid stegpålastningar. Resultatet ger en stabilare reglerstabilitet än i verkligheten, men uppfyller ändå förväntningarna på en fungerande modell.This report describes the development of a new kaplan turbine model.

The aim of this study was to investigate how the process of implementing a quality management system for food safety was handled in four different food producing companies in Sweden. The aim was also to analyze what difficulties the companies face and the possibilities that arise when certified. Furthermore, the reason for implementation was discussed as well as the main expectations on the certificate. Implementing a quality management system is a good way of ensuring the quality and hygiene of the food production and it also increases the traceability of food products through the whole food chain. A food safety standard provides a method of preventing problems and crisis and it can also help to handle requirements from authorities, the market and others.

Syftet med detta examensarbete har varit att ta fram badrumsinteriör för företaget Space Interiör innehållande kommod, spegelskåp och högskåp eller motsvarande. Bakgrunden till projektet har varit att uppdragsgivaren önskat att utveckla sitt sortiment för badrumsinredning. Målgruppen för projektet var enligt angivelse personer under 35 år boendes på en yta mindre än 50 m2. Nyckelorden från företaget var smart förvaring samt innovation.Den teori som behandlats i projektet rör sådan som varit relevant för utvecklingsarbetet så som ergonomi, material och dess underhåll, standarder samt det som påverkar det estetiska uttrycket. Arbetet har varit målstyrt och har därför utförts enligt en stage-gate-modell som lämpar sig för denna typ av projekt.

This report aims to examine the design of a passive house. The design addresses the selection ofmaterial, sizing and selection of both building services systems and building technical features suchas load-bearing framework and moisture control. Interior layout is designed for a family of twoadults and one child.A big part of the report is devoted to an in-depth comparison of three different wall constructions ofpassive house standard. The structures that have been compared are a lightweight timber structure, aheavier concrete structure and a sandwich wall of the brand Weber Leca. The report covers variousaspects such as air flow, wall thickness, the risks associated with the construction, U-value, thermalbridges, power consumption, price, and assembly costs.

This report aims to examine the design of a passive house. The design addresses the selection ofmaterial, sizing and selection of both building services systems and building technical features suchas load-bearing framework and moisture control. Interior layout is designed for a family of twoadults and one child.A big part of the report is devoted to an in-depth comparison of three different wall constructions ofpassive house standard. The structures that have been compared are a lightweight timber structure, aheavier concrete structure and a sandwich wall of the brand Weber Leca. The report covers variousaspects such as air flow, wall thickness, the risks associated with the construction, U-value, thermalbridges, power consumption, price, and assembly costs.

This report aims to examine the design of a passive house. The design addresses the selection ofmaterial, sizing and selection of both building services systems and building technical features suchas load-bearing framework and moisture control. Interior layout is designed for a family of twoadults and one child.A big part of the report is devoted to an in-depth comparison of three different wall constructions ofpassive house standard. The structures that have been compared are a lightweight timber structure, aheavier concrete structure and a sandwich wall of the brand Weber Leca. The report covers variousaspects such as air flow, wall thickness, the risks associated with the construction, U-value, thermalbridges, power consumption, price, and assembly costs.

The aim of this paper is to find an algorithm to establish and maintain a virtual enclosure around a mobile unit. The area may take any form and should be scalable up to and including national borders. The enclosure is managed on the mobile unit. The target system is Android. Smartphones, tablets and more recently, cameras is examples of mobile units.

We have made a litterature study about pain in animals. In this studie we have brought up areas like sign of pains in animals, pain relief and the care perspective. Pain is perceived when body tissue is damaged or nearly damaged by stimuli. Nociceptors, which are receptors placed at nerve endings, responds to a provocation of pain and transmit an impulse along the nerve to the brain via the spinal cord. Pain is urgent or chronic, and can be divided into nociceptive pain (somatic pain and visceral pain) and neuropathic pain. Different pain mechanisms can arise, such as referred pain, which is when signals of pain are referred to other parts of the body.

Our employer Camatec Industriteknik AB gave us the assignments to increase theirs range of versions on Camcoil that is their own patent product. Camcoil is a capstan system that is used when steel band fabricated. Exist for example in production lines their steel band should be annealed. Our goal with this work is to come up with a completed production basis on a Camcoil for heavy industry. The basis should contain calculations, 3D-constructions, drawings and cost proposal on manufacturing and detail purchase.Demands on this project:1.