In offshore oil production FMC Subsea systems use a product called cap. The cap´s mainly task is to protect hubface and seal areas on inboard hub against dirt, corrosion and mechanical damage under installation of a subsea system. A new model of a cap has been designed and analysed using finite element method. The model is called KC3-12 and has a new function, emergency release, which is a backup method for the ROV (remote operated vehicle) to release the cap from the hubface when it is placed under water. The cap KC3-12 was found to fulfil the criteria under the test load pressure, according to ASME VIII, div2.

During 2007 the City of Stockholm installed five grid connected photovoltaic systems. The aim of this master thesis is to quantify the amount of produced energy and recommend routines to collect and analyse production data, to make production data accessible by the public and to gain experience for future installations.The total amount of produced energy until March 2009 is 227 000 kWh, with an annual rate of 150 000 kWh. The expected annual rate was 148 000 kWh.All system owners are positive about their plants and see economical benefits in scaling up such systems.The installations need very little attendance and maintenance, however it is recommended that an alarm function is installed for automatic feedback in case of a system failure. All future systems should be inspected during full operation to determine if the actual capacity is matching the installed capacity..

Homework is and has always been a part of school work. It may take a lot of time from the pupils? leisure. Despite this, you cannot find anything written about homework in the curriculum. How can this be? Is homework necessary and what is its function?The purpose of this study is to find out how a few teachers in primary school reason about homework.  What are their attitudes towards homework and what functions do they see?To get an answer to this I studied literature and research reports, and did four qualitative interviews with teachers who teach grades 1-6.The results show that all the teachers give homework to their pupils, but their opinions about homework differ.

By limiting our horse?s freedom of movement, we restrict their opportunity to forage, which is one of their most important needs. If their need of forage is not fulfilled it can lead to frustration, which might manifest itself in abnormal behaviour, like the oral stereotypies for example crib-biting. It is a held belief that the horse swallows air while crib-biting, which they don?t, and that swallowed air causes colic, and the belief that other horses can copy the behaviour, leads to the use of many methods to prevent the behaviour.

At Kungliga Biblioteket in Stockholm you can find over 40 000 letters sent to Selma Lagerlöf. Many of her readers wrote and asked for her help, and the letters show that she helped a lot of people with money as well as with writing advice. People from all over the world asked her for money to be able to study, to finish their written works, or just to get through the day. Others want her to read their texts and poems, because they wish to hear her opinion or wonder if she can put in a good word for them at some publisher. This essay illuminates the question why so many people had this confidence in Selma Lagerlöf.

  iiiAbstract?We are living in a time of project. Everything becomes project. All development, all efficient,all changes are running as project?.

This thesis is made on behalf of SCA's Forestry Division and is a comparison of two bucking simulation tools: Aptan (manufactured by Skogforsk) and Best/upr (from Berget Systemdesign). The data is based on 32 stands from SCA's forests in Norrbotten and Västerbotten. The objective is to compare the simulations created by the tools with the harvested volumes from those stands. Three variables are needed for the bucking simulation; these are the diameter distribution (at breast height), the relationship function between diameter and height, and the taper coefficients. The volumes of five different assortments from the stands are compared.

This report is about the issue with decreasing production rate mainly caused by failuresrelated to the multiswitch. The multiswitch is a machine at Gefleortens Mejeriföreningwhich has the function of distributing milk cartons from one incoming track into fiveoutgoing tracks. Milk cartons who gets stuck and there by causes the production to stop,is the mainly problem with this constructionThe purpose with this report is to understand the causing factors and make suggestions which can help solving these factors. By analyzing the machine during production, having contact with different suppliers, searching internet for information, 3d-cad drawings and the complementary with personal experiences, this machine has  been evaluated and as a result of this new problem has come to be known.The discovered problems was analyzed and resulted in new suggestions for alternative options. Later the most functional results was chosen and put as a suggestion for the new model.A new machine built with the suggestions from this report assures to be well adapted to the environment at Gefleortens Mejeriföreing and the problems it causes..

Warehouses are a key aspect of modern supply chains and play a vital role in the success or failure of businesses today. Figures from the USA indicate that the capital- and operating costs of warehouses represent about 22 % of a company?s logistics costs while figures from Europe indicate 25 % (Baker & Canessa, 2009). Because warehousing is such an important function within a company, the authors chose to focus on this in their thesis. The purpose of this thesis has been to examine the significance of a Warehouse Management System (WMS) and item identification with attention to logistic efficiency.

This thesis researches the construction of the Swedish masonry heater called r?rspis. A r?rspis has an inner smoke channel system that stores heat and it was developed in the early 19th century alongside the Swedish kakelugn (tiled stove). Unlike the tiled stove, the R?rspis was commonly found in simpler environments and is part of the cultural her itage of the rural population.

Who has the ownership of a company´s long-term strategy, and who should have it? Is it the board of directors or the senior management? Swedish law and regulations seemingly point in one direction, whereas the findings of studying the relationship between CEO and chairman of the board in eleven Swedish listed large- and mid-cap companies, point the other way. In a majority of the companies the senior management have the ownership of the long term strategy whilst the board of directors merely hold a control function. The possible effects on the companies managed as well as the rules and regulations they are managed according to, are analyzed..

Man spends most part of the day at work and is therefore influenced by it?s ambience. That?s why it?s important that the environment at work is health promoting and can function as a supportive environment. The purpose of this study was to describe job satisfaction among employees and to analyse a possible connection between job satisfaction and employees experiences of SOC.

The purpose of this essay is to shed light upon the ecumenical work that has been done between the Church of Sweden and the Mission Covenant Church of Sweden. The recent years of work have led to a recommendation for a certain degree of fellowship to be established between those churches. This proposal as well as other documents are analysed in the essay from an ecclesio-logical point of view, to find out how the Church of Sweden looks upon itself in meeting another church.To structure the material, the essay has been subdivided into seven parts that is related to ecclesiology. In those seven chapters the positions of the Church of Sweden and the Mission Covenant Church of Sweden are given individually as well as in common. Questions like the im-portance of dioceses, local congregations or parishes and the national level are described.

Softube has developed DSP-card and software for simulation of the sound of old tube amplifiers. The purpose with this thesis is to design a compact amplifier with high power to function together with the DSP-card and build a unit that can replace several other guitar amplifiers. The advantages with that kind of solution could be that it would be cheaper, easier to carry and easier to stor than the real amplifiers. The amplifier that has been designed is of class D type with digital PWM modulator. There is several types of amplifier modules on the market that use analog input signal, but if one of them would be used a D-A converter is needed on the DSP card.

In this project I have worked with porcelain och and porcelain decors. The project was based on questions like why porcelain is such a richly decorated product and how you can maka a shape and a decor feel like a entirety. In December 2009 I went to China in search for answers and to study porcelain decors. This trip has been my inspiration throughout the whole project and also the main theme for the idea, the shape and the decor. That is why I decided to make a teacup with a plate that also has a function as a lid.As I first started working with the shape I was thinking to make a rounded teacup, inspired by the chinese rice bowls, but since I had to produce the porcelain by myself I decided to make a much more simple shape.