This thesis has the overall objective to develop the optimum sealing system between the retarder and transmission. Today, there is a pressure-relief and two radial seals separation between the retarder and transmission. It has been found that carbon residue formation may occur between retarder axle and seal lips with, in some cases, leakage as a result.We have in this thesis tried to explain the phenomenon of carbon residue, how it is formed and why it can be seen just on the seals? A rig test was conducted where we show how friction, speed, transmission temperature and mitigation phases of the retarder affects temperatures in the sealing environment. Factors affecting the coke structure are reported, together with proposals for measures that provide a mitigating seal environment.

This report is a thesis work for a B.Sc. in Forestry exam at the School for Forest Engineers, SLU. The aim of the work was to compare fuel consumption during work in practical field conditions with a standardized method developed by Skogforsk (The Forestry Research Institute of Sweden), (Brunberg, 2005) for harvesters and forwarders from different manufacturers and of different sizes in order to promote the development of more fuel efficient machines. Two studies were carried out. - Statistics of fuel consumption were collected. - An inquiry was sent out in order to get more detailed information of different aspects influencing the fuel consumption. The studied machines were divided into two classes, large machines (> 150 kW), and average size machines (100 ? 150 kW), and of the manufacturer Timberjack and Valmet. Our results shows a 15 % lower fuel consumption for average size harvesters and an 8 % higher fuel consumption for large harvesters compared with Skogforsks model.

Could patterns change the way we as consumers feel about a product as it ages and wears down? Why do some products increase their value as they are being worn downand others do not? Could the same affection that increases with your favourite jeans or an old, worn down, scratched and beautiful wooden furniture, be applied on otherproducts with different ability?s and history?The goal was to explore patterns and beautiful aging in products to increase the consumers desire to keep the well used product a little bit longer. Not to prolong the products ?lifetime? from brand new till it?s no longer inhabit their main function, but at that precise momentwhen you as a consumer decides to through it away in favour for a new, updated version. To buy ?new and fresh?.Patterns with different expressions, colouring and size, were explored that increase the value of a product which in this project contained handles and varies of surfaces on casseroles, frying pans, whisks, cutlery etc.

We?re all aware that technology progresses forward with giant leaps on a daily basis. In one-way or another this affects us in our everyday life. It can affect us in the way we?re shopping, communicating, researching, planning future events or how we choose to be entertained. That the web is an increasingly stronger tool for communicating in more or less every type of business is becoming more evident for people.

Students? performance in school is dependent on the indoor climate. This report studies four schools regarding air quality and thermal environment. A survey was made at the schools as well as measurements of carbon dioxide, dampness, thermal climate and, as an indicator for the furniture?s capability to collect dust, shelf factor and fleece factor.

Calesco Foil AB is a manufacturer of thin flexible circuits for heating or electric conduction.The plant is located in Kolbäck, Sweden.One of the company?s products, the conducting polymer pasta is in present situationunpredictable. Unpredictable in the way that the same type of heater shows differentresistance, depending on which time they have been produced. The desired repetitivelyprocess is almost non-existing.The aim of this master thesis is to primary identify those parameters that effects theresistance, observe and if possible to perform tests on them. The results from this analysisstand as base for recommendations to achieve a repetitive and standardized printing process.The results and the observations from the tests indicate that a repetitive process is possible toachieve.

Project Safe Sleeping Position (SSP) contains all parts in a product development phase. The project comprises the whole cycle from idea to a complete product where all aspects are included. The scope is to develop an innovative solution for a common known problem and work with all parts within the man-machine-way. The result is an inflatable product which secures a child in the correct way for the seatbelt to work properly in the rearseat of a car. Ergonomics, technical extent, usability, design, construction, product solutions and market potential are some of all parts witch the project includes.

Denna rapport innehåller en redogörelse för mitt examensarbete, Charlie åkerkarusell, som gjordes vid Carl Malmsten ? Furniture Studies, LinköpingsUniversitet, våren 2012. I mitt arbete undersöker jag hur man kan serietillverkaen liten produkt med hjälp av mallar och fixturer anpassade för film och hur mandokumenterar processen med hjälp av film. Jag har tittat på olika filmer som rörämnet och olika typer av mallar för att sedan formge en liten figur vid namnCharlie, som serietillverkades i en serie av 30 stycken. Jag utförde några avmomenten i serietillverkningen med hjälp av en typ mall som jag konstruerade.Mallen, som jag valt att kalla för karusellmall, är inte den mest rationella men ärdäremot betydligt mer spännande och spektakulär än en traditionell mall.

This report describes a new foundation method and compares it with a traditional founding of concrete. This new method is called the Koljern technique and uses cellular glass which is called Foamglas. The Foamglas is compounded to founding elements by lightweight steel beams. Foamglas is an insulation material with high compressive strength, and is rot, insect, vermin and acid proof. The cellular glass is also fire proof and watertight, which makes it a very good construction material.The report contains a study of a number of cases for which the Koljern technique is compared with a foundation of concrete.

The purpose of this project was to invite a changed perception of active sitting, to introduce a more active way of sitting in office environments and destigmatize an active sitting posture such as straddling by giving active sitting products conscious aesthetics based on environment and positive associations. The goal with this project was an active sitting product for office environments with aesthetics considered encouraging to movement in a relaxed way, regardless of age and gender, and connect to materials and aesthetics related to activity, experience and recreation. Horseback riding, retro style surfing and skateboarding was an entry of investigation. The project was based on existing active sitting products, their function and production techniques. It was not a part of the project to investigate new models of sitting.

Hoppsasteg ? med känsla av glädje är ett examensprojekt som pågått under 20 veckor. Namnet har jag valt för att det är en känsla som jag vill uppnå under perioden. Syftet har varit att genomföra projektet med lust, göra figurativa, svartvita mönster med ett tecknat uttryck och att göra en flexibel möbel. Mönstren har ritats i tusch, det har tryckts på både tyg och tapet.

The thesis work has been carried out at Volvo Aero Corporation (VAC) in Trollhättan. VAC has entered a partnership as developing and producing partner with engine manufacturer Pratt & Whitney and is currently at the starting phase of producing the turbine rear frame (TEC) to the engine PW1000.The purpose of this study was to create a report on process level that describes the conditions and the potential with PW1000 TEC to reach the product cost calculation taking into account lead times and describe alternative method solutions.The report describes a comparison between the present flow (2012), a flow based on product cost calculation (2016) and a potential flow (2016). The work has mainly been based on acquiring the knowledge and information available to inspect the present flow; this has been done by workshop observations, meetings and gathering of the information that is available on the work site for the PW1000 TEC.The information obtained has been merged into an Excel document, called Roadmap. It serves as a roadmap with current situation as the start and the potential flow for 2016 as the goal. With the roadmap as a tool, assumptions have been taken considering the flow and how it will change, where processes have been eliminated, reduced or marked as a problem..

Sten Jonsson wants to start a production of an advertising catalogue for small companies in Sweden. Acatalogue where the advertisingcost is so low that most of the companies can afford to participate. Thecompanies who will advertise should be manufacturing companies in trades of carpentry, sheet metalworkshops, forging workshops and engineering workshops.The catalogue will facilitate for the manufacturer to reach the costumer without any middleman.Without a middleman creates a possibility for an opinion about the product at the same time as theprice can be held low. A catalogue of this type would benefit the marketing of the companies at the sametime as it would generate an occasion for innovations.The possible target groups are property companies, construct companies and farmers.A market research has been carried out contained a postal interview and a phone interview. Themarket research carried out to get an understanding in what the companies think about the idea butalso to see if the companies are in interest of advertise in the catalogue.

We are surrounded by things. They have their own personalities. Some evokes our emotions. We want to own them. We develop strong relationships to each other.

AbstractAbetong in Falkenberg manufactures, among other things, small prefabricated concrete buildings for housing various installations, such as electric transformers.The aim of this dissertation is to reduce the time needed to design such buildings, by way of finding a number of standardized buildings. Standardized in such a manner as to incorporate both the needs of the manufacturer (Abetong) and its customers.To analyze the needs of the parties the work has included a market survey and calculations on the strength of these buildings.One survey was a letter questionnaire to all of Abetong?s customers who have, in the past, ordered these types of building. The aim of the questionnaire was to establish how the customers want these buildings designed.Another survey conducted was an inventory of all of Abetong?s previous projects where these types of building were manufactured.