Jag har som examensarbete på master-nivå formgivit en sittmöbel med utgångspunkt från min uppväxt i Dalarna. Målet har varit att göra en filosofisk tolkning av mina minnen samt en hyllning till regionen, i synnerhet Borlänge där jag växt upp.Jag har under projektets gång gjort en resa både på ett mentalt och rent fysiskt plan tillbaka till den plats jag växt upp för att utforska mina minnen och därigenom skapa en plattform för mitt designarbete.För att nå mitt resultat har jag använt mig av designmetoder som ITK, intervjuer, skisser, studiebesök, materialtester, mockups samt modelleringsverktyget Rhino.Resultatet är en stol inspirerad av saker som bland annat Ornäs stugan och musikkulturen i Borlänge. Stolen består av en metallkonstruktion, trädetaljer vid fötterna samt armstöden och en sits i läder.For my thesis work on postgraduate level, I have designed a chair based on my upbringing in Dalarna. The goal has been to make a philosophical interpretation of my memories and a tribute to the region, particularly Borlänge where I grew up.During the project I have made a trip both on a mental and physical level back to the place where I grew up to discover my memories and thereby creating a platform for my design work.In order to achieve my result, I have used design methods such as ITK, interviews, sketches, field trips, materials testing, mockups and the modeling tool Rhino.The result is a chair inspired by things like Ornässtugan and the music culture in Borlänge. The chair consists of a metal construction, wooden feet and armrests and a seat made from leather..

The work presented in this report is written at IEIs department on Linköping Institute of Technology. The report aims to increase the assembly efficiency at Wigells AB. The report shall be used as a guide for the implementation of changes at other workstations in the company. Together with Träcentrum in Nässjö, Wigells AB has identified the needs of this study and contacted IEI at Linköping Institute of Technology.In order to implement an efficient assembly line at the company, studies on lean production have been made. This theory has been studied and together with our own views and findings at the company we have analyzed the assembly area.Wigells is a small company that manufactures wood furniture.

This report covers the product development of a new type of extendable table for the company Karl Andersson och Söner. The company wants to expand their product collection with a new product. Karl Andersson och Söner is a well-known family company that has been located in Huskvarna since 1898, and they are producing furniture for private- and the public environment.The aim with this project is that the product should lead to increased sales, as well as expand their collection to appeal a wider audience. The work is permeated by two issues, to achieve as good results as possible. The issues will bring up how to make a table better, in terms of the competitor?s options, and how to apply a design process to develop a table that meets the markets needs and requirements.The design process of the work consists of strategically picked parts from three separate design processes.

Our employer Camatec Industriteknik AB gave us the assignments to increase theirs range of versions on Camcoil that is their own patent product. Camcoil is a capstan system that is used when steel band fabricated. Exist for example in production lines their steel band should be annealed. Our goal with this work is to come up with a completed production basis on a Camcoil for heavy industry. The basis should contain calculations, 3D-constructions, drawings and cost proposal on manufacturing and detail purchase.Demands on this project:1.

This is a dissertation for a Bachelor Degree Project at the University of Skövde. The project is carried out in cooperation with the company Kinnarps AB.The objective of this project was to develop a new chair for café and lunch rooms, which should satisfy the markets expectations and demands and match Kinnarps AB?s assortment today. The project has contained everything from identification of user and customer needs and requirements to evaluation and building of a prototype.The result is a chair with a frame of tubular steel and there is nothing like it in Kinnarps AB?s assortment today.

Tractors of today come equipped with a CAN-system. A CAN-system sends information from sensors to electronic control units who process the signals. The sensors measure several interesting parameters such as force, pressure and speed for various components of the tractor. This thesis discuss a force sensor which is placed in the pivot of the tractors three point linkage, the sensor measure the horizontal reaction force from the load that the tractor is exposed to. Signals from this sensor can be used to measure the force from any implement that the tractor is exposed to during an operation.

The objective was to examine the frequency of unwanted behaviors in the Swedish feline population and what factors in the environment, inheritance and past life that have an influence on the frequency. SLU?s web poll generator was used to create a web poll which insinuated that it was a poll with objective to make an inventory of the Swedish feline population. I wanted to avoid that only owners to cats with unwanted behaviors answered the poll. The web link to the poll was sent to SLUs students and posted on Internet forums for people interested in cats.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

Inom den svenska förskolan har antalet barn ökat i barngrupperna samtidigt som resurserna har minskat. I det ökade barngrupperna skapas det en större oro bland barnen. Pedagogerna inom den svenska förskolan upplever att det blir mycket spring och konflikter. Detta gör att pedagogerna strävar efter att hitta nya arbetssätt som minskar oron och konflikterna bland barnen. Mitt syfte i denna studie är att undersöka hur en förskola genomförde en förändringsprocess kring sin innemiljö, det vill säga rum, möblering och material.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

After being excluded from the Swedish Social Democrat party in 1917, the Revolutionary Socialists founded the Social Democrat Left Party. From this point onwards, the Social Democratic hegemony and dominant position within the Swedish workers movement and political landscape was challenged. This thesis aims to investigate the power struggles between these two parties, the Revolutionary Socialists and the Social Democrats, and their desire to influence control of the unions. Taking cues from earlier research calling for a more localized look at this struggle, this thesis turns to a case study of union matters of the the Factory Workers Union Local 84, at Västerviks Tändsticksfabrik, a match manufacturer and largest employer in the Swedish coastal town of Västervik from 1925 to 1930. Organizational material including meeting protocols, annual reports and member registration lists from the local political parties, cooperative union organizations (VFS) and Local 84 serve as secondary data sources.

The automotive industry is a highly competitive market characterised by low profit margins or huge losses. Cost reductions have been of top priority for all OEM?s (Original Equipment Manufacturer) and will continue to be so for many years to come. Beside cost reductions, reducing the time-to-market is of greatest importance to stay in the competition. OEM?s that are slow to market with products that neither matches customer expectations nor the products of their competitors, will soon loose market shares and see their economical performance falter.

This study was based on measurements of growth and shape of 50 clones of wild cherry, Prunus avium L, in south Sweden and aimed at finding out wether or not any of these clones are useful for commercial propagation. Initially, a short assembly of documented knowledge concerning wild cherry as a timber producing tree species was put together. The study of the 50 clones includes information gathered during the fall of 2006 from four trials located in the counties of Blekinge, Småland and Västergöland. The oldest trial, founded in Tranemåla, Blekinge, in 1992, was focused on offspring and aimed at discerning differences between provenances and at developing an adapted plant material. The other experiments were both clone trials and founded in 2002. These are based on 50 individuals selected from the offspring trial in Tranemåla.