SammanfattningDetta arbete handlar om att kritiskt belysa de aspekter av undervisning som är centrala för mig som pedagog. Som lärare vill jag nå fram till eleven, jag vill att eleven ska ha möjligheten att vara kreativ och att få uppleva det tillstånd som kallas flow.Arbetet har utgått från de upplevelser jag fick av musik när jag var yngre, då tänkte jag inte i termer och begrepp utan upplevde - utan allt för förutfattade meningar. Nu när jag är lärare känner jag ett starkt behov av att identifiera vad jag då upplevde för att kunna ge mina elever en liknande kick av musik. Identifieringen har lett fram till detta arbete, jag kunde inte sätta ord på vad jag sökte men visste ändå intuitivt vad det var jag ville åt. Så småningom kom orden på plats: jag har i mitt identifieringsarbete kretsat kring kreativitet, flow och undervisnings metoder.

Detta arbete a?r en sja?lvstudie i att utveckla improvisation pa? saxofon. Syftet a?r att utforska hur det a?r mo?jligt att uppna? en niva? av frihet i det improviserade spelet. En grundtanke som presenteras i inledningen a?r att all musik egentligen kommer ur improvisation.

My bachelor?s dissertation concerns the creation of a proposal for interior decoration of the Boland High School?s canteen. I have been in contact with personnel, students and the school principal through the duration of the project. In the end, substantive changes of lighting, interior decoration and movement were proposed for the canteen. In the proposal I have focused on accentuating the school?s profile, on creating smaller spatial configurations within the larger configuration of the room, lowering the noise level, creating a good movement flow, increase the number of seats and creating a pleasant environment in which to eat..

Studiens syfte är att ur ett symbolisk interaktionistiskt synsätt försöka förstå vad som motiverar vuxna amatörskådespelare, amatörsångare och amatörmusikalartister att delta i ideella konstnärliga projekt. Något annat som studien tar reda på är om konstutövandet och gruppen de deltar i har någon inverkan på individens identitet och identitetsskapande. Genom nio semistrukturerade intervjuer skapas en förståelse kring motivationen och identitetsskapandet. Detta förklaras sedan genom motivationsteorier samt teorier kring identiteten, där det visar sig att gemenskapen i gruppen, konstnärlig utmaning och utveckling, deltagandet i den konstnärliga processen, känslan av flow, själva utförandet och dess påverkan på välbefinnandet, viljan att uttrycka sig samt personlig utveckling var de huvudsakliga motivationsfaktorerna. Det visar sig även att både det konstnärliga utförandet och gruppen har en inverkan på individens identitet och identitetsskapande..

A patient simulator for testing anaesthesia machines has been developed at Maquet Critical Care AB, to reduce costly and time-consuming experiments on animals. The device simulates human lungs regarding lung dynamics and volume, uptake of anaesthetic agents and the production of carbon dioxide, heat and moisture. Further demands on the simulator are durability and size; the device shall be compact enough to be moveable.The resulting simulator fulfils the requirements and enables better repeatability and ability to test extreme cases than experiments on animals do.Uptake of the anaesthetic agent is achieved in a active carbon filter and controlled by regulating the flow. The flow is created by a regenerative blower and controlled using a proportional valve. The uptake can be set by the user or by a simple uptake model modified to recursively handle changes in the concentration of anaesthetic agent.Carbon dioxide is fed into the system from a tank by a mass flow regulator.

Development and construction of an electronic Breakout box is the main work for this thesis. The box is a part of a test system for the component Fuel Flow Transmitter and should convert signals to be suitable for a frequency counter. A previously constructed Breakoutbox for this purpose is being old and needed to be recreated. So SAAB Aerotech, Aircraft services, the company for the thesis work wanted to construct a new, more sustainable Breakoutbox adapted to a more modern technology. The signals to the box comes from the transmitter and should be converted to suitable signals for a frequency counter so it can show pulse and time difference between the signals.

Eutrophication of lakes and streams are nowadays a well known environmental problem and implies an enrichment of the nutrients phosphorus (P) and nitrogen (N). Phosphorus is considered to be the most important component for the growth of aquatic plants and leads in too large quantities to an intensification of growth. Phosphate (PO4) is the fraction of phosphorus that can easiest be taken up by plants and thus have the greatest impact on eutrophication. Increased plant growth in lakes and unfavorable conditions for aquatic animals are two examples of negative consequences. A significant portion of the increased nutrient supply to nearby water can be derived to phosphate leaching from agricultural areas, where private sewers and agriculture is two main sources.

Drawing on earlier research, and using observations as the method, this study presents a design of a nature playscape for children. Applying outdoor pedagogy to the fundamental structure of a specific location, the study proposes a design of a playscape, over a more obvious design, for instance one based around a quiz walk.The theoretical framework is Gibson?s theory of affordance, and the goal has been to create a "play flow". The study concludes that spatial rhetorics can be an important tool when teaching children about nature..

Self-driving cars are soon to become a reality to the commercial market. A self-driving car does not have a human operator, which enables some interesting characteristics. The main benefits are considered to be:The number of accidents and traffic jams should be reduced.Enhanced comfort.Energy usage could be decreased while capacity could be increased.This study concerns the causes for improved energy efficiency. The reason for improved energy efficiency is mainly because of the variation in terms of acceleration, braking and distance holding are reduced. The vehicles are more intelligent and can work together as a unity.

Denna kvalitativa motivationsstudie utfördes på åtta svenska toppsäljare och utgick i från Vallerands hierarkiska modell om inre och yttre motivation (1997) och även från Czikszentmihalyis teori om flow (1990). Syftet med studien var att ta reda på vilka motivationsfaktorer som förenar toppsäljare. Toppsäljarna intervjuades enskilt genom en semistrukturerad intervjuguide. En tematisk analys utfördes på utskrifterna från intervjuerna och analysen undersöktes utifrån tre huvudkategorier: inre motivation, yttre motivation, och flow. Resultatet visade att toppsäljarna hade en stark inre drivkraft att utvecklas, att nå egna mål och uppnå positiva känslotillstånd av själva utförandet.

The aim of this Master?s thesis is to investigate the meaning the reading group of the public library has to a number of users. To fulfill the aim the following three questions have been formulated: 1) What do a number of users expect from the reading group of the public library? 2) Which approach/attitude or approaches/attitudes do a number of users have to reading and to talking about reading? 3) How do a number of users experience the ongoing reading group?The research is founded on qualitative interviews with five users that take part in three different reading groups in public libraries. The theories that are used is the theory of three so called strategies - the pragmatic, the traditionalistic, the emancipatory ? and the theory of flow.

Self-driving cars are soon to become a reality to the commercial market. A self-driving car does not have a human operator, which enables some interesting characteristics. The main benefits are considered to be:The number of accidents and traffic jams should be reduced.Enhanced comfort.Energy usage could be decreased while capacity could be increased.This study concerns the causes for improved energy efficiency. The reason for improved energy efficiency is mainly because of the variation in terms of acceleration, braking and distance holding are reduced. The vehicles are more intelligent and can work together as a unity.

Severe floods caused by heavy autumn rains in year 2000 raised the question whether measures to reduce the damage from high water levels, in the area surrounding lake Glafsfjorden and along the river Byälven down to lake Vänern, are possible. One option is to reduce flow resistance along the river and thereby lower the maximum water level a given inflow would cause. Good knowledge of hydraulic and hydrological conditions is necessary in order to estimate the effect of such flow-reducing measures. In order to quantify such effect a 1-dimensional hydraulic flow model has been set up for the river Byälven using the software package MIKE 11. The model is more detailed, especially concerning topography and bathymetry, than earlier models used for studies of the river.

In Halland, agriculture is the major source of eutrophication of water. In the study, synoptic sampling were performed in the three watercourses Nyrebäcken, Skintan and Vinån all located in the county of Halland. Sampling occurred during the period February to May on three occasions with different flow rates: high, low and base flow. Samples were taken in the mainstream and tributaries with intention to show how big the impact of eutrophication it is in the water and  to assess the impact of the tributariesThe results show that all watercourses are affected by eutrophication. Nyrebäcken has the highest concentrations of nitrogen and phosphorus in the mainstream, then Skintan and last Vinån.

An often encountered problem when implementing a mass flow regulator in a rolling mill is the one with measurement of speed. The most widely used solution is to fit a pulse counter to a wheel that is in contact with the strip. Common problems with this design are for instance scratch marks on the strip and problems with the flatness measuring system.  One way of circumventing the aforementioned problems would be a non-contact measuring system. The market of today only offers systems based on the Doppler principle.This report evaluates three different systems for non-contact speed measurement. Important areas in the evaluation have been the ability to operate under normal rolling conditions, integration in existing control system and how well the sensor can be fitted to the rolling mill.