Ett examensarbete på högskolenivå som går igenom framtagningen av en ny produkt åt friluftsföretaget light my fire..

Today dairy farmers in Sweden are obligated to have lights turned on during night time in addition to the mandatory daylight inlet. This presents a cost for the production but many argue that it can be economically beneficial, especially in loose housing of dairy cows. In loose housing and even more so in herds with automatic milking, well functioning cow traffic during all hours of the day is crucial to optimise production. In order to keep the cow traffic flowing, lights may be an important management tool. It is also perceived among farmers with tied up stall that night light decreases the incidents of cows accidental stepping on their own or neighbours udders.

The aim of this master thesis is to investigate the ideas about functions that public libraries have in the local society. We have used the method idea analysis on four municipal library plans, to find out which ideas about library functions that frequented each plan, and what similarities and differences there were between the ideas about functions in each plan. As a theoretic base, we have used a theory about three dynamic spheres in modern society: the state market and civil society, and examined how these three spheres influence and control the library functions. We have extracted six different ideas about library functions: educational, social, economical, entertaining, serving and democratic functions. The most dominating ideas in this study are ideas that the public library should be an educating and formative institution.

En studie av kopparvävens egenskaper i kombination med ljus.A study of the copper weave characteristics, in combination with light..

Då scenkomplexitet och ett högre antal ljuskällor blir vanligare inom spel har ett behov av algortimer för att hantera dessa scener, med bra prestanda, uppståt. En allt vanligare algoritm för detta är Deferred Shading. Rapporten utvärderar två olika metoder för Deferred Shading (traditionell Deferred Shading och Light pre-pass rendering)..

This report examines some common or otherwise interestingnon-cryptographic hash functions with respect to the number of collisions when used in hash tables for different types of hashkeys. The report answers which of the examined hash functions can be seen as the best performing for the chosen hashkeys. To compare the different hash functions, an experiment which studies avalanche effect behaviour is carried out. The experiments also calculate the fraction of colliding hashkeys, and the distribution of hashkeys in hash tables is studied using Karl Pearson?schi-squared test.

During the 1930´s the hot potato for the Swedish lighting associations were how to create the most suitable light for every situation, either for industries, offices or homes. The light bulb were the most frequently used source of light but due to limitied luminous intensity, big halls sometimes required up to hundreds of light bulbs to produce the right amount of light. Two kinds of different lights, by different reasons, can be titled the predecessors of the fluorescent lighting during the 1930´s: The volfram-filament tube light due to its estetic similarities and the electric discharge (mercury- and sodium-) lamps due to its technical resemblance. Even though they came in quite wide use (the volfram tube in public halls (e. g.

The objective of this work was to evaluate and implement a number of energy saving functions for a specific embedded system. The functions were then grouped into a number of energy levels with known properties in terms of functionality, energy consumption, and transition time between the levels.The embedded system consisted of an AT91 ARM9 processor, GSM/GPRS modem, display, Ethernet and other peripheral units. Some energy saving methods that were considered were suspend to RAM, suspend to disk, frequency scaling, and methods for saving energy in the modem, Ethernet, USB and display backlight. The functions were grouped into levels and an interface was specified for controlling the energy level.It proved possible to get known properties within the defined energy levels, even though the paritioning of functions into these levels proved to be sub-optimal in a typical application usage scenario because it was designed for mainly energy consumption, not usage.The final result is a number of energy saving functions grouped into levels, which are controllable via an application interface. Each of the levels have a known energy consumption in both loaded and un-loaded mode..

The objective of this work was to evaluate and implement a number of energy saving functions for a specific embedded system. The functions were then grouped into a number of energy levels with known properties in terms of functionality, energy consumption, and transition time between the levels.The embedded system consisted of an AT91 ARM9 processor, GSM/GPRS modem, display, Ethernet and other peripheral units. Some energy saving methods that were considered were suspend to RAM, suspend to disk, frequency scaling, and methods for saving energy in the modem, Ethernet, USB and display backlight. The functions were grouped into levels and an interface was specified for controlling the energy level.It proved possible to get known properties within the defined energy levels, even though the paritioning of functions into these levels proved to be sub-optimal in a typical application usage scenario because it was designed for mainly energy consumption, not usage.The final result is a number of energy saving functions grouped into levels, which are controllable via an application interface. Each of the levels have a known energy consumption in both loaded and un-loaded mode..

The purpose of this study was to investigate whether cannabis use can affect cognitive functions. The method that was chosen to answer the purpose of the study was a general literature review. Article search occurred in the databases PsycINFO and PubMed. Nine articles were selected based on the study?s inclusion criteria.

The objective of this work was to evaluate and implement a number of energy saving functions for a specific embedded system. The functions were then grouped into a number of energy levels with known properties in terms of functionality, energy consumption, and transition time between the levels.The embedded system consisted of an AT91 ARM9 processor, GSM/GPRS modem, display, Ethernet and other peripheral units. Some energy saving methods that were considered were suspend to RAM, suspend to disk, frequency scaling, and methods for saving energy in the modem, Ethernet, USB and display backlight. The functions were grouped into levels and an interface was specified for controlling the energy level.It proved possible to get known properties within the defined energy levels, even though the paritioning of functions into these levels proved to be sub-optimal in a typical application usage scenario because it was designed for mainly energy consumption, not usage.The final result is a number of energy saving functions grouped into levels, which are controllable via an application interface. Each of the levels have a known energy consumption in both loaded and un-loaded mode..

This report describes a project, which was carried out as a final thesis covering 30 ECTS during the final semester of the Master of Science programme Industrial Design. The assignment was issued by Fagerhults Belysning AB in Habo. The assignment was to design a family of products in which LED was to be used as a source of light. The main focus in the initial part of the project was to find a way to design the inside of armature which was suitable for LED technology. An armature, already in the range of products at Fagerhult, with the desired qualities that was to be strived after was the Zintra. The lighting source of the Zintra is a compact fluorescent lamp.

The purpose of this study was to investigate whether cannabis use can affect cognitive functions. The method that was chosen to answer the purpose of the study was a general literature review. Article search occurred in the databases PsycINFO and PubMed. Nine articles were selected based on the study?s inclusion criteria.

This project is about color and light and how it affects the atmosphere in the city. I choseto look closer into the central parts of the city, a place where I often feel a lack of lightand color, especially during the winter season. In the beginning of the project I made ananalysis of how intense colors are used in the city and how we can use color as a tool tocreate effectful spaces. Further into the project I chose to look closer into the effects thatare made by the facades, how the light from the windows affects the room outside when the dark falls. At the end of the project I caught a feeling inspired by the city and applied it into an installation of light..

I detta arbete undersöks hur bestraffningsmetoder för att bestraffa storleken på GP-program påverkar generaliseringsförmågan. Arbetet grundar sig på ett arbete som Cavaretta och Chellapilla gjort, där de undersöker skillnaden i generaliseringsförmåga mellan bestraffningsmetoden ?Complexity Penalty functions? och ingen bestraffningsmetod.I detta arbete har nya experiment gjorts med ?Complexity Penalty functions? och ?Adaptive parsimony pressure?, som är en annan bestraffningsmetod. Dessa bestraffningsmetoder har undersökts i samma domän som Cavaretta och Chellapilla och ytterligare i en domän för att ge en bättre bild av hur de generaliserar.I arbetet visar det sig att användningen av någon av bestraffningsmetoderna ?Complexity Penalty functions? och ?Adaptive parsimony pressure? oftast ger bättre generaliseringsförmåga hos GP-program.