This thesis have been performed at Sweco Position in Jönköping. The work was split into two, where one part included an investigation regarding the possibility of developing a cross-platform GIS (geographic information system) with HTML5 and CSS3. A prototype would also be developed within this part.The second part included development of a cross-platform GIS for a client to Sweco Position. The client operates in the forest sector and had already an existing solution, with many problems. The client required an application with delimited Functionality and which was not bound to a specific hardware.As the client users often were located in areas with limited Internet access, one additional requirement was that there would be some offline support.The students handle subjects within development of GIS, for example map projections, map services and mapping libraries.The application came to be developed in HTML5 and ASP.net.

The goal of this thesis is to investigate the W3C Geolocation API from a developer?s perspective, focused on whether it makes development of location-based applications more accessible to developers. This has been investigated by looking at available ways to locate, possible uses, the Functionality offered, the necessary level of prior knowledge needed for a developer and requirements on developer tools. This has been achieved through studies in relevant areas, a thorough introduction to W3C Geolocation API Functionality, and by using the API to develop two different location-based applications as a demonstration. Testing of applications, on different platforms and in different environments, in conjunction with investigation of the rest of the material has shown that W3C Geolocation API in many ways actually makes development of location-based applications more accessible for developers. The API also provides fully adequate Functionality and quality to meet the requirements for development of both simple and very advanced location-based applications. Målet med denna uppsats är att undersöka W3C Geolocation API ur ett utvecklarperspektiv, fokuserat på om den gör utveckling av positionsbaserade applikationer mer tillgänglig för utvecklare.

EPiServer is a content management system where users can publish information on a website by using a web browser. EPiServer has a built-in search engine that is very simple. Many customers using EPiServer web publishing system is in need of more Functionality than is offered by EPiServer's built-in search engine. The purpose of this thesis is to develop additional Functionality extends that the built-in search engine in EPiServer. The assignment was also to identify what need to be developed in order to give customers a better  opportunity to help their visitors find the right information on their website.Since this thesis was started in 2005, a number of commercial search engine productsentered  the market and it has become more common for companies to invest inthese products instead of using the simple search engine that's built into EPiServer.These products have many of the features that have been developed in this thesis.Another crucial difference between EPiServer?s built in engine and other products isthe method used to index content.

System Andersson AB is a company located in Jönköping that works with developing computer systems for the mechanical engineering industry. As of today, when this report is written, the company is working on the development of a new Manufacturing Planning and Control (MPC) system. This new system aims to create not only a user friendly interface but also a modern, stylish interface. To achieve this, the company has decided to work with a, for them, new application framework; Windows Presentation Foundation (WPF).System Andersson is well known for developing systems for different kinds of touch screens, this project is no exception. For this new user interface the company wishes to implement different types of Drag&Drop Functionality.

In the future network-based Swedish Defence (NBD), attaining information superiority will be of great importance. This will be achieved by a network of networks where decision-makers, information- and weapon-systems are linked together. As a part of the development of NBD, we have performed a study of user interface design for a future network-based tool package for analysis of sensor systems, referred to as the C2SR-system. This thesis was performed at Ericsson Microwave Systems AB, Sensor and Information Networks, during the autumn 2002. A pre-study concerning the requirements of usability, trustworthiness and Functionality of a user interface for the C2SR-system was performed.

System Andersson AB is a company located in Jönköping that works with developing computer systems for the mechanical engineering industry. As of today, when this report is written, the company is working on the development of a new Manufacturing Planning and Control (MPC) system. This new system aims to create not only a user friendly interface but also a modern, stylish interface. To achieve this, the company has decided to work with a, for them, new application framework; Windows Presentation Foundation (WPF).System Andersson is well known for developing systems for different kinds of touch screens, this project is no exception. For this new user interface the company wishes to implement different types of Drag&Drop Functionality.

In this thesis, the TEI (Text Encoding Initiative) encoding scheme is investigated as a system for storing metadata about manuscript material and 18th century first prints in the Swedenborg Archives at the Swedish Royal Academy of Sciences. The aim of the study is to test the Functionality of TEI as a metadata system in cataloguing a special collection. Some criteria of Functionality are formulated, and examples of encoded catalogue entries are described and analysed. It is demonstrated how descriptive metadata have been registered within the TEI header, while structural metadata have been recorded within the text element of the TEI file. On the whole, TEI is considered to be a functional tool that matches the present purposes.

System Andersson AB is a company located in Jönköping that works with developing computer systems for the mechanical engineering industry. As of today, when this report is written, the company is working on the development of a new Manufacturing Planning and Control (MPC) system. This new system aims to create not only a user friendly interface but also a modern, stylish interface. To achieve this, the company has decided to work with a, for them, new application framework; Windows Presentation Foundation (WPF).System Andersson is well known for developing systems for different kinds of touch screens, this project is no exception. For this new user interface the company wishes to implement different types of Drag&Drop Functionality.

This master thesis project will describe and evaluate the interfaces between applications and Controller Area Network, CAN, interface boards from different manufacturers. The interfaces have corresponding functions but the usage of parameters is different. The simply communication of sending and receiving messages is more alike than the supplementary functions between the different interfaces. The CAN communication is more controlled by the CAN protocol and is therefore more alike. The evaluation shows differences and similarities between different interfaces and also difficulties and options to translate them.

Cache simulator is a tool to increase the understanding of a cache memory. Therefore cache memory simulation is included in the course Computer Engineering IS1200 at the Royal Institution of Technology. The purpose of this project is to develop a cache memory simulator for education. The existing MipsIt and Mips Simulator which is currently used in IS1200 has been the main source of inspiration. This resulted in the development of the cache memory simulator LMSim.

The essay deals with the hill-fort on the mountain Halleberg, Sweden, its wall design, Functionality, dating and its possible function as a central location and a place of worship of the ancestors.The Halleberg hill-fort consists of a 1500 meters long at times cohesive stonewalls which together blocked the mountain from its surroundings. Hallberg's natural vertical scree and cliffs along with the masonry blocked the whole mountain from the surroundings.The hill-forts, with few exceptions are largely not investigated archaeologically and its Functionality and role in the ancient society is based on outdated research on the subject. The current archaeological interpretation is that hill-forts served as temporary defense in times of unrest or served as center of power for a social elite. The prevailing view in the archaeological sphere is that the hill-forts had a variety of functions and that its Functionality and role in ancient society has varied.Halleberg´s strongest wall sections are at the mountain's south-eastern part where the natural driveway, Storgårdsklev is located. Along with the massive masonry of the walls in Bokedalen Storgårdsklev functioned as the hill-forts main entrance.

This thesis investigates how a developer can move a desktop application to the web environment. The investigation also includes finding out what are the limitations of a web application and what is not possible to move to the web from the desktop. The question is whether there is any Functionality that is gained or lost in the web application after the move.A survey has been conducted to find out what types of problems occur when moving an application from desktop to the web. The authors of this thesis have developed two prototypes for a company who wants to move a limited part of their current desktop application to the web in the future. The prototypes have been developed in Silverlight and ASP.NET.The survey has revealed that one of the disadvantages of web applications is the difficulty in working with local files and hardware on the computer.

As an amateur it can be difficult filming from several angles at the same time as this requires several cameras. It´s also hard to film at occasions when it´s not appropriate to manoeuvre the camera manually. Systems for solving these problems already exist, but it´s either more expensive, professionalsystems or cheaper systems with limited Functionality.The purpose of this project is to develop a cost efficient solution to the problem above that offers a better Functionality then existing commercial systems. The biggest difference from existing products is the wireless video feedback from the camera to the remote unit.The result of the project is a system consisting of two units, a manoeuvre unit with a cradle for the video camera and a remote unit from which the operator can control pan and tilt of the video camera.Communication between the two units is wireless.On the remote unit there is a joystick and a display mounted. In addition to this, there is also an IR receiver that is capable of reading the signal from the cameras own remote and sending it to the manoeuvre unit.The manoeuvre unit is equipped with one motor to control the tilt function and one motor to control the pan.

This thesis is a part of the DySCAS (Dynamically Self-Configuring Automotive System)project which has the overall purpose of creating a middleware for the electronics in an automotive environment. The thesis has been made with collaboration with ENEA AB who is a member of the DySCAS project. ENEA AB has developed a demonstration platform to test the fundamental ideas which the DySCAS project is built on.The purpose of this thesis was to design and implement a GPS application to be added to the demonstration platform. This was done by adding a GPS receiver to the original DySCAS demonstration platform and designing and implementing an application to be able to extract the information from it. The resulting application is able to present cur- rent position and absolute time to the DySCAS networks as services to be used by other applications or by the network it self.

The object of this study is to examine the effective Functionality of an OPAC-system while a few participants interacted with the catalogue. I?ve used Carl Martin Allwood?s (1998) four designed usability factors to be able to estimate the effective Functionality of the online catalogue. Theoretic basis is Human Computer Interaction together with Allwood?s four defined usability factors.