In recent years, existing solutions for cooling personal computer CPUs have been supplemented by a new product category, factory sealed water cooling loops. These systems, consisting of a water block with an integrated pump, a fan and a radiator, perform well compared to the air cooling solutions but are less effective than larger, custom-built water cooling systems.This project aims to explore the most important aspects of a factory sealed system and to identify possible cost-effective enhancements of the performance.The most significant differences between the different groups of water cooling loops are the block design and the pumping power. The performance of both categories is also largely dependent on the fan power, but increasing fan power has a large negative impact on the noise level.Both radiator size and fan model choice appear, in tests, to be relatively unimportant, presuming that the noise level is kept constant. The position and direction of the fan, however, has significant impact on both the temperature and the sound level.Water blocks can be designed in several different ways, both regarding the heatsink design and the flow direction. In simulation, flow with the inlet centered above the heatsink result in considerably lower pressure drop and slightly higher temperatures than flow through the block, for heatsinks with fin arrays.Creating a competitive product in this product segment certainly seems possible, as there are performance-increasing changes to be made that seemingly has little impact on the production cost.

This report deals with prefabricated bathrooms and the advantage, during the production process, they have compared to ordinary produced bathrooms.The work is done together with the building company JM. The common task is to investigate if the manufactures, in spite of standardized design can meet the concept of JM, i.e. high flexibility and adjustment towards the customer. In JM they are doubtful to the method, as they did not yet worked with prefabricated modules and think that the choises for the costumer will be limited.There will be a short resume of the progress of the bathrooms and its importance as sanitary and wellbeing.The recent problems with damage caused by damp in bathrooms. Have resultade in regulations.

Issues related to knowledge assessment and its consequences for both the individual and the entire school system are topical in today's school debate. The mere fact that didactic issues that focus on assessment are discussed actively not only in scholastic environments but even in media and other communities is further proof that knowledge assessment is an important and complex phenomenon in our lives.The subject that I have chosen to look into is about how the work with assessment issues is handled in Swedish as well as Russian elementary school's early years. The goal with this study is to see how my studies have been conducted with a qualitative approach by which I collected qualitative information in the form of documents, papers and interviews. To make the approach even more appropriate for my area of research, I have chosen to merge two qualitative research methods. The first is a qualitative content analysis which analyses the governing documents.

This essay is a comparative study on Migration period ring forts, centered on Sandbyborg, a ringfort situated on the southeastern shore of the Baltic island of Öland.Furthermore this essay focuses on the contemporary Iron Age society, and thestrategical implications of the ringforts in their function as fortifications. Certaininternational comparisons are made, in particular regarding the fortifications in theRoman empire..

In 2005 Gunhild Eriksdotter published Behind The Facades in which she analyses the ways of approaching historical buildings in archaeology. Eriksdotter emphasizes that the archaeology of buildings is in dire need of renewal videlicet the traditional outlook on buildings as two-dimensional objects need to change. She develops a method of analysing the spatial dimensions in a three-dimensional world. By fusing theories and methods in excavating archaeology and architecture, she is able to give us a new way of approaching buildings. Her method includes the analysing of a buildings material, spatiality and use.

The purpose of this essay is to investigate and discuss the current state of game research and its potential usage in didactic situations. The essay is divided in two parts. Part one consists of an attempt to comment preceding contemporary game research and address possible myths that have been established. Part two aims to discuss games narrative capacity and function in education using the theories and terms laid down by Wolfgang Iser and Gérard Genette.Contemporary game research tends to focus on classic retro games, trying to form theories for a general understanding of the media. This is a useful method as long as the purpose of the study is to define how game mechanics and layout are formed.

Introduction:By insight in the company and by monitoring the management, the board has an important function in creating trust in governance of the company. Furthermore, the board reduces the asymmetry of information between the owners and the management, which also is the function of the auditor, by auditing how the board governs the company and the accounting. In case the board does not effectively monitor the management, the auditor has to extend its monitoring, which increases the owners agency costs through the audit fee. The board composition can affect how effectively the board practices the monitoringProblem: How is the audit fee affected by the board composition?Purpose: The purpose of this study is to explain how the board composition affects the audit fee.Method: The study uses a quantitative method, where the data was collected from the annual reports of 112 limited companies listed on the NASDAQ OMX Large and Mid Cap lists on January 2, 2012.

This thesis for the Master of Science degree was performed at Oppunda Electronics AB. The assignment was to further develop an existing prototype of a dispensing equipment. The dispensing equipment doses a kind of glue, bonding which dentist use to mend teeth. The dispensing equipment is adjusted to dose 12 micro litres of bonding. With the dispensing equipment SafeBond Electronic the user can reduce the bonding consumption with approximately 50 percent.

In my project, Cups on the run, I have studied the relationship between ceramic utility objects and different environments, when moving them off the table. My background as a potter has been the starting point. From there, I wanted to see if I could expand my craft to the space beyond. With the cup, which for most people has a clear function and a relation to us human, in repetitive structure I explored the spatiality and architecture in various environments. Life fascinates me through how everything is made up of tiny parts that together create the tangible and intangible.

Introduction: Dolomite AB was in need of a dummy arm for crutch testing, to complement their existing test capabilities. Background: A large number of people need crutches on a daily basis. For them it is essential that their crutches do not fail. ISO (the International Organization for Standardization) conducts ongoing work to guarantee the durability and function of e.g. crutches.

Predation is one of many factors that form the structure of the macroinvertebrate community in lakes, wetlands and watercourses. Earlier studies lack an examination concerning how fish- and waterfowl predation affect macroinvertebrates during shorter periods in the spring. I performed an exclosure study in the shallow eutrophic Lake Tåkern which is located in the western part of Östergötland County, Sweden. The experiment was performed during a three week period (1-21 April 2012) when the water temperature was low and the density of migrating diving ducks was high. The experimental cages used included three out of four different treatments; general predation (open cages), bird exclusion (net with mesh size 90*45mm) and no predation (net with mesh size 1*1mm).

This master thesis was carried out at ELFA, one of the largest catalogue distributors of electronics in northern Europe. ELFA offers a wide selection of products such as measuring instruments, fuses and screwdrivers. The master thesis handles the possibilities of an increase in the internal flow of products. The background to this problem is ELFA?s acquisition of two new companies, which brought the product range in the warehouse from 55 000 to 80 000 products.

Natt i marknadstältet is considered as one of Lars Ahlin?s most significant works of fiction. The novel is complex in structure and meaning, containing numerous stories and characters entangled with the main story. One of these stories is the subject of this essay:?Berättelsen om Hedvig och hennes son?.

Customer satisfaction is a key aspect for many corporations, among them Exacta Distributionscenter. To raise their customer satisfaction, we have researched ways to raise customer satisfaction through the implementation of an error-handling system and recommendations on how the organization should function in the future. This paper describes how these recommendations and the application has been developed, through help in existing theories. This results in a customer portal with the main purpose to provide help in handling orders with errors, and several routines recommended to Exacta Distributionscenter. .

The empirical data used for this master thesis, consists of eight manuals with the main purpose to help students evaluate information resources found on the web or Internet. The purpose is to elucidate the discourses and investigate those textual characteristics, which figure in the investigated manuals. The method used is a discursive and linguistic approach, with a power/knowledge discussion applied to the results. The analysis identifies, among other things, the production and consumption of the investigated texts, and that the manuals function as a reflection of the relationship between the participants in the situation, the sociocultural practice of the institution and its identity..