In this final thesis two simulation models have been integrated. The simulation models are models of JAS 39 Gripen?s fuel system, software and hardware. The time consuming and costly work to develop software has made the department of fuel system to build two models in Xmath/Systembuild. The software model also simplifies the comprehension of how the software in the control computer of the fuel system works.

This report brings up the question - ?Is BIM profitable when planning a single-family home??.The methodology for finding the answer to this question is firstly to state the definitions of BIMand the company that is projecting by using the BIM-model. The answer is then obtained byanalyses of the factors of profitability with respect to: time, opportunity of revision, problemvisualization, preference adjustments and energy. A BIM-model has been made simultaneously asthe writing has proceeded to get a perception of how a BIM-model really matters for the analysis.The analysis shows that the answer for the question depends on further factors. The factors thatare mostly discussed are the company?s intentions and the complexity of the house.

In this thesis, a transparent model of the human head has been constructed which was filled with a substance that represented the brain. This model was later crash tested. This was done in order to examine how a transparent model of the human head can be constructed to generate accurate data from crash tests. It was also done in order to examine how impacts on the front of the head can deform the rear of the brain. When a head is decelerating, the brain moves forward inside the skull and may hit the front of the skull.

Entrepreneurial failure is probably a subject that is not well understood. This might have to do with the methodological difficulties of screening out failed entrepreneurs. In this thesis a tool is developed for analyzing supposed entrepreneurial failure. In this model entrepreneurs are surrounded by different stake holders. By using the failure deconstruction model to analyze my own entrepreneurial effort I find that it has neither been a successful project nor a disastrous one.

This paper examines and analyzes effects of the introduction of a new management control system tool within a Swedish public health organization, the Södra Älvsborg hospital, and its possible effect on organizational change. The new management control system tool, known as the SÄS-model, has been widely criticized for being too costly and with too small positive effects to be shown. Our approach has with that as a background been to examine whether the implementation of the SÄS-model and its balanced scorecard has been able to result in effects regarding organizational change. We have through a case study aimed to analyze how a management control system, much alike one that is typically used within foremost private organizations, can promote organizational change. Our results suggest that the implementation of the SÄS-model and the balanced scorecard has given the organization clearer visions and goals.

In this thesis, a transparent model of the human head has been constructed which was filled with a substance that represented the brain. This model was later crash tested. This was done in order to examine how a transparent model of the human head can be constructed to generate accurate data from crash tests. It was also done in order to examine how impacts on the front of the head can deform the rear of the brain. When a head is decelerating, the brain moves forward inside the skull and may hit the front of the skull.

In order to evaluate the benefits and costs associated to investments in information technology (IT) managers need to be aware of the complexity in the nature of the task. Hence all the benefits that arise from the investment are not of pure economic character. The complexity of the task is even more obvious when managers also need to prioritize between a number of possible investments in order to fit a given budget.Stora Enso Skog AB is about to implement a new administration system to the organisation and due to that they will also implement a new standard system for the production planning process. In order to seek the modifications in the standard system that needs to be done to fit the organisations way of working, the managers have put together a reference group to seek out these modifications.The aim with this report is to identify a model that can prioritize these suggested modifications and test it practically with a group of future system users. The first part of the report is a literature study to map the existing models that are available.

The study was conducted on 72nd company at Livgardet in order to find out what motivators makes the soldiers stay. The material in the essay is based on an interview with soldiers from the 72nd company. The motivators are then categorized in the model Employee Motivation: A Powerful New Model. The model is based on human drives and I used as a tool for the analysis to identify lack of motivation in a working place. The study shows that the key motivators that make soldiers stay is: the opportunity to go on a peacekeeping mission and comrade/esprit de corps, the soldiers state that they will quit without these two essential motivators.

As emission legislations across the world continuously pushes engine development forward,engineers constantly need to come up with and implement fuel saving technologies. During thelast decade, variable cam phasing has become a popular solution to increase gas exchangeefficiency. This configuration is typically mechanically constrained by camshaft limitations, anda solution to circumvent this problem would be to use a different valve actuation principle.One example of this is to use pressurized air controlled by electrical solenoids. Such a systemhas been developed byCargine Engineering and this provides the starting point for this work. Tobe able to operate the valvetrain on an actual engine, a control system is needed.

In this thesis, a transparent model of the human head has been constructed which was filled with a substance that represented the brain. This model was later crash tested. This was done in order to examine how a transparent model of the human head can be constructed to generate accurate data from crash tests. It was also done in order to examine how impacts on the front of the head can deform the rear of the brain. When a head is decelerating, the brain moves forward inside the skull and may hit the front of the skull.

Syftet med studien var att ta reda på hur lärare ser på inkludering av elever i grundskolan och vad de har för åsikter kring begreppet. Huvudfrågorna som studien grundade sig på var vad lärare ansåg om bristen på förändringar i skolan, hur de själva skulle vilja nå en skola för alla samt om de ansåg att full inkludering är någonting eftersträvansvärt.     Tidigare forskning har visat en problematik mellan styrdokument kontra verklighet, där dokumenten talar för inkludering medan verkligheten inte riktigt ser ut så. Datamaterialet insamlades med hjälp av intervjuer med sex lärare. Vid intervjuerna användes en intervjuguide och samtalen spelades in med hjälp av bandspelare.     Resultaten har visat att det finns en viss samstämmighet bland informanterna. De anser att full inkludering är ett mål att sträva emot.

Projects is the most common work model within the cultural area, but what is a cultural project? The definition of cultural projects is ambiguous. There are also no compiled information about what it means for culture to be pursued in project form. Scientific research about traditional project management and success criterias are wide-ranging. So is the scientific research about cultural studies and cultural policy.

The purpose of the present qualitative study is to create knowledge about librarydigital services and their marketing to patrons with disabilities in Armenia, on theexample of the National Library of Armenia, as well as, to discover opinions of theNLA librarians and patrons with disabilities about the importance of library digitalservices to people with disabilities. Literature review and qualitative interviewing has been employed as methods to collect the empirical data. The results have been analyzed and discussed based on the library-marketing model of marketing research, marketing segmentation, marketing mix strategy and marketing evaluation suggested by Koontz & Gubbin (2010). It has been concluded, that 1) e-accessibility issomething new at the NLA and the NLA does not provide equally available knowledge, resources, services, facilities to patrons with disabilities, because of the following main challenges: lack of continuous funding and support from the state, lack of appropriate facilities and technologies, lack of qualified staff, and historicallyinherited library infrastructure impediments; 2) no library service marketing is conducted to patrons with disabilities at the NLA; 3) the opinions are that provisionwith such services is very important to people with disabilities, since they allow those people to gain access and use information in formats adopted to their various needs, and, of course, they become integrated into the modern society. The important role of a library as a non-discriminator and copyright protector in a developing country when delivering digital library services to patrons with disabilities has also been discovered..

The name of the study means ?The short arm - a study in diversity and arm?s length in the cultural collaboration model?. Right now there is a reform in the Swedish cultural administration where the responsibility for handing out state funds and grants to cultural organizations is changing from the state government to the local regional governments. The purpose of this study is to map the organisational changes caused by the reform and investigate how this affects the regional policies concerning cultural diversity and the arm?s length principle.

This degree project has been carried out by Carolina Rapp and Jenny Tauson, students at Innovation and Design Engineer program at the Faculty of Technology and science at Karlstad University. The project was carried during Spring of 2009 and took 15 weeks of full time work.  Doppelmayr/Garaventa Group is an Austria/Switzerland corporate group and its associated company Doppelmayr Scandinavia lies in Sunne, Sweden. Doppelmayr/Garaventa Group is the world quality and technology leader in ropeway engineering. The degree project goal was to develop a new shaping of a surface lift. There are two kinds of surface lifts, platter and T-bars. The two kinds of surface lifts have some variation in design but only minor differences.