To regularly remove woody vegetation along the roadside of forest roads is an important part of the road maintenance, since the vegetation binds moisture in the road side and, thus, the removal makes the road drying faster with results in improved bearing capacity. Vegetation removal also makes it easier to upgrade the road by material recycling from the ditch and, moreover, the visibility along the road is maintained.The aim of the study was to evaluate what type of chain flail is the best and most cost-effective for removal of different kind of woody vegetation along forest roadsides.Time studies were made on two chain flails when removing woody vegetation in three different classes; easy-, middle- and heavy shrub removal. The studied flails were one light and rather simple flail named Optimal M160 and a heavier and more advanced flail named Slagkraft H210. The removal was made according to Holmen Skogs? specification and the quality of the cleaning was measured by objective belt inventory.The productivity was higher with the heavy flail within all cleaning classes.

The financial crisis in 2008, effected companies around the globe and forced them to change their operational strategies, in order to survive. Companies with international links needed to consider external effects and due to that adapt their strategies on a global level. Demands for goods and service were decreasing and companies could only manage the cost during a recession to not face bankruptcy. Organisations need to reconsider their optimal strategy as this will determine their future outcome when managing a crisis as the one in 2008. British Airways - Air Cargo is a global company with an international network which serves about 80 countries, with about 200 destinations.

Denna uppsats slutsats är enligt vår mening att företagen till viss del följer upplysningskraven enligt IAS 36 p. 134 men eftersom det är ett principbaserat system leder detta till att upplysningskraven blir en tolkningsfråga. Detta gör att företagen tolkar upplysningskraven på olika sätt och medvetet som omedvetet i kombination med brist på kompetens, döljer information för att konkurrenterna inte ska få full insyn i verksamheten. Vi anser att normerna bör ha utformats till att bli ett ?kokboks tänkande? så att de inte kan tolkas på olika sätt och på så sätt minskar komplexiteten i IFRS regelverket..

Vi har i vår uppsats kommit fram till att man i stort kan beskriva IKEA-kulturen som homogen eller enhetlig, då den är baserad på universella värderingar, men med heterogena inslag som en konsekvens av nationella kulturskillnader och lokala omtolkningar av de universella värderingarna. Vi menar att detta påverkar kulturen i egenskap av styrverktyg och påstår med stöd i den dialektiska synen på utveckling att man kan styra med en stark organisationskultur men att det är omöjligt att ha full kontroll över kulturens utveckling då förändring, ur en kulturell aspekt, är något man aldrig fullt ut kan kontrollera..

The last decade has created an increasing pressure on companies to decrease their impact on the environment and to increase their effectiveness of recycling the company?s resources, especially for the steel industry. Companies have also started to realize the economic aspects of an effective internal reverse logistics. In the past the value of an effective internal reverse logistic was something that companies tend to underestimate and there are few academic studies done in this area. The purpose of this essay has been to identify key factors to create an effective in plant storage, transport, sorting and handling of returned steel. From these factors a generalized model for creating an effective return steel flow will be developed.

Det huvudsakliga syftet med min studie var att vinna kunskap om högläsningssituationen i förskolan med fokus på lärarens roll. Med hjälp av videoobservationer har jag undersökt hur högläsning går till på en utvald förskola utifrån tre pedagogers agerande och förhållningssätt. Observationer har gjorts vid sex tillfällen, två per pedagog. Resultatet av studien har visat att pedagogens agerande och förhållningssätt absolut påverkar hur högläsningssituationen är utformad vilket framträder beträffande både innehåll och form. Resultatet av det insamlade materialet har analyserats utifrån Bernsteins teori om klassifikation, inramning.

Forestry and reindeer husbandry are entitled to use the same land for their operations. For this reason, conflicts occasionally arise between them. Soil scarification is a forestry operation which has a negative effect on the occurrence of reindeer lichen. Reindeer lichens are of crucial importance to reindeers and reindeer husbandry, especially in the winter when reindeers primarily feed on different lichen species (Cladina spp. and Cetraria spp.).

This study concerns mapping and analysing two different Supply Chains at Setra Group. Setra Group is Sweden?s biggest producer of solid wood and is primarily owned by Sveaskog, Mellanskog and LRF. The Company consist of twelve sawmills, five planning mills and an organisation for distribution of building material. This study maps one chain for Swedish Glulam standard beam and one chain for solid pine flooring on export to Japan. The glulam chain is based on spruce as raw material and includes all actors between sawmill and the Swedish building material retailers.

In June 2006 the Swedish government decided that the use of energy in buildings should be reduced by 20 percent until 2020, compared to the level of energy used in 1995. To contribute to this goal, the real estate company ?Eskilstuna Kommunfastigheter AB?, set up own goals for their buildings. In 2009, the goal for schools was to have a maximum energy use of 118 kWh/m2year for heating and hot water.The school ?Hållsta skola?, just south of Eskilstuna, exceeds the limit since it used 270 kWh in 2008.

This Master?s Thesis aims to investigate and assess the methods used to decrease the discharge ofmetals, primarily copper, from the water purification plant at Assa Industries plating factory inEskilstuna.Literature studies of the purification methods precipitation, ion exchange, evaporation, reverseosmosis and electrolysis has been done to appraise the adequacy of the technique. Thesetechniques are commonly used for purification of industrial waste water.Assa has four plating lines: the Trumline, the big Zinkline, the new Zinkline and the Decorativeline. The new Zinkline is the most modern of the four lines and purification is done byrecirculation over an ion exchange unit. The demand for fresh water is thereby heavily reduced.The Trumline, the big Zinkline and the Decorative line all use older techniques.

This study evaluates the retention of nitrogen and phosphorus in four newly constructed wetlands in the municipality of Falkenberg, Sweden. The four wetlands have been selected because they have been specifically constructed with the aim to reduce nitrogen and phosphorus in farming areas. The process of selecting the specific wetlands has been done in collaboration with the county administration in Halland. Through field studies in collaboration with the landowners where the wetlands are sited, the areas that provide the wetlands with water were determined. The size of these drainage areas were determined in a GIS computer program. The type of land use within the drainage areas was also determined.

In an attempt to develop a more cost-efficient material for solar   energy applications, nano-particles of nickel oxide composite in a silikatmatris manufactured with solar gelmethod and studied structurally by electron microscopy. Furthermore, the thin film optical properties characterized by Variable. Angel Spectroscopic Ellipsometry. Sol gelfilms suitability as a selective absorber surface is also analyzed by optical modeling..

Title AB Volvo Pentas packaging system ?process and packaging logisticsAuthor Peter Powell, Lund's Technical CollegeSupervisors Annika Olsson, Lund's Technical CollegeJan Svensson, AB Volvo PentaProblem - Packaging requirements ? Which requirements are there, how do they affect each other and how are they fulfilled?- Packaging process ? what is the line of action when developing new packaging and making adjustments in existing ones? Who has the responsibility to do what?- Packaging logistics ? How is the packaging system adapted to transport efficiency and handling?Objective To create an overall picture over how the packaging system affects and is affected by different functions and players within and beyond the company boundaries, to give a clear picture of how changes in the packaging system is made today and how it could work and finally to give suggestions for cost savings affected by the packaging system.Method The methods used for this thesis has mainly consisted of action research and at some extent case studies. As a previous employee at the department of logistics at Volvo Penta I?ve taken part of the environment, information and prerequisites that this thesis discusses on a daily basis. Case studies have been used for the collection and analysis of data concerning packaging logistics as I?ve chosen to consider only specific markets and packaging.Conclusions This thesis has highlighted the demands that are placed upon engine packaging throughout all concerned units and how these demands affect each other, positively and negatively.

Due to recent legal enactments regarding carbon dioxide emissions, the car industry is facing higher demands. An effective way of reducing these emissions is to minimize the weight of the vehicle. This thesis constitutes a feasibility study on whether or not it is applicable for the car industry to utilize an inner floor structure comprising composite materials. The principal was the projectSåNätt, in which the main participant was Volvo Cars Corp. In consultation with a reference group, consisting of delegates from the industry and KTH, a specification of requirements was produced.

Return handling is often regarded as a slow and complex process. Studies have shown that it is not unusual for a return to cost up to nine times as much as a standard outbound delivery. An efficient return handling process is therefore essential to all competitive companies dealing with logistics. This report investigates, analyzes and gives suggestions on development with the purpose to improve the return handling process at LensLogistics AB in Kista, north of Stockholm, Sweden. The study has been conducted from a deliberately practical point of view in order to suggest improvement suggestions possible to implement and thereby change the entire return handling process.