The transportation sector is the only sector of the Swedish society that is still increasing the emissions of carbon dioxide and other green house gases. Diesel Fuel represents one of the Fuels that contributes to these emissions and the use of diesel Fuels is increasing every year. The main purpose of this study was to make an estimation of the current business situation for producers of liquid diesel bioFuels in Sweden such as biodiesel, synthetic diesel and crude tall diesel and examine the forces of competition of the industry today and its future prospects. The study revealed that the rivalry among the existing firms was low mainly due to the geographical spread of the companies. Moreover the success of the biodiesel industry was influenced by a long-term guarantee of the tax exempt for bioFuels and by the price level of petroleum diesel.

Car usage is determined by several facts, e.g. living conditions determined by geographical matters. There is a political will to control car usage with different kinds of incentives since car usage generates environmental problems. This essay analyses the differences between car usage in urban areas as opposed to thinly populated areas in Sweden and their significance on governmental incentives. By using statistics differences in car ownership during ten years between thinly populated areas, areas in the countryside and urban areas is studied.

This is a graduation project in Innovation Management, which seeks to enlighten new theories within the major subject ? the multi?faceted innovation process.The reader is hereby invited to an insight in the more complex perspectives of these types of theories than what has previously been explained in simplified ways.We have conducted research on a company within the cleantech market; Cellkraft AB. The company develops and produces Fuel cells amongst other products, which have emerged during their research and development in the Fuel cell technology. Cellkraft works in a high?tech frontline market where innovation is key.

The cost for forestry logistics in Sweden is about 25 percent of the total cost of getting the raw material to industry (Anon., 2010). There might be much to gain by taking a look at your supply chains on the logistic side in your company. In this report the logistic chains by Mellanskog for ENA Energi AB in Enköping has been looked in to. ENA Energis plant is a combined power and heating plant and about 99, 5 percent of their Fuel consisted of bio energy in year 2009 (ENA Energi, 2011, länk A). The main purpose with this report is to look at three questions: 1. How does the supply chain look today? From forest to industry. 2.

The aim for the study was to examine a harwarder´s (combined harvester-forwarder) productivity when harvesting forest Fuel in first thinning stands that contains Lodgepole pine and calculate the economy of the harvesting work and estimate the quality of the thinning . The field study area where located near Arvån, about 15 kilometres south ?east from the city of Lycksele. The field studies were taken place in three different stands. All tree stands had the same tree age, but the tree species combination and the density varied.

AbstractThis degree thesis was made in cooperation with Chematur Engineering in Karlskoga.Many of the environmental issues of today are a result of the motor traffic. Consumption of fossil Fuels harms our environmental through formation of carbon dioxide and other greenhouse gases. To get under control with our environmental issues it?s important to find substitutes for oil that are both cheap and environmentally friendly. Ethanol has a long history as a motor Fuel and is both enviromentally friendly has a high efficiency.According to the EU commissions directives for motor Fuels, 5, 75 % of all the Fuels in Sweden should be renewable in 2010.

A recommendation for stand treatment of lodgepole pine (Pinus contorta) is, in a scientific point of view, lacking when it comes to harvesting for biomass energy. Within the next decades it is expected that 280 000 hectares of lodgepole pine will have reached thinning age on the domains of Svenska Cellulosa Aktiebolaget (SCA). Due to this the interest has grown rapidly for studying the possibilities of harvesting bioFuel assortments already in the first thinning. In this study the distribution of the biomass within lodgepole pine trees has been studied and taken into account for estimating the proportions of harvested assortments when using different methods of thinning. The methods studied were conventional bioFuel-harvesting (with delimbed branches gathered separately from the round wood) and thinning with cutting of round wood and long tops (incl.

With higher prices for oil and increased focus on fossil Fuels impact on the environment the heating sector are searching for alternative Fuels. Pellets are a quite new product whose production has risen exponential in recent years. Today there are small-, medium-and large-scale users, where the large-scale consumers are the heating sector. The heating sector is mainly using oil to cover the increased demand during cold periods. The purpose of this study is to analyze the potential of pellets if it would replace thermal power plants oil and coal. The study will also analyze the economic impact a conversion would mean for a heating plant and if the pellet is a reasonable substitute. 2008 statistics from the Swedish district heating association were analyzed and a calculation was performed to determine how many tons of pellets is needed to replace coal and oil.

In this study I have compared two systems of handling TMR, self-propelled/ self loading mixers and conventional towed mixers, what has been investigated is the time for filling, mixing and feeding TMR as well as maintenance and Fuel consumption. The background of this study is the structural rationalization within the Swedish milk production that has put focus on efficiency and reducing of costs. Forage and labour are the two biggest costs in milk production today. The study has been performed by visiting three farms and with a stopwatch measured the times for filling, mixing and feeding TMR. At the time for the visits, the users have been interviewed regarding maintenance and Fuel consumption. They have also had an opportunity to give comments of how they experience the mixers. The result of the study after processing is that the average stock in the study can save 74000 SEK a year by reducing time for filling, mixing and feeding TMR to cows with a self propelled/ self loading mixer . The conclusion I can make of this study is that it?s not the size of the stock that decides whether it?s interesting to invest in a self propelled/ self loading mixer, but the presumptions on the farms, for instance forage logistics and mechanical equipment..

The work covered in this report includes a literature study of the diesel dual Fuel technology(hereinafter referred to as DDF). The literature study covers earlier work that has been doneregarding the use of compressed natural gas (CNG) and diesel in a DDF system. Moreover a onecylinder research diesel engine was fitted with a CNG Fuel system for experimental testing. Theinstallation of the engine and the test cell is described. Results from the tests are presentedcovering emissions, heat release and pressure traces from the DDF-concept.During the literature study it was found that most research was related to heavy duty dieselengines.

To reduce emissions of carbon dioxide (CO2) Carbon Capture and Storage (CCS) technologieshave been developed. Chemical Looping Combustion (CLC) is a CO2 capture technologywith the CCS framework, and at Chalmers University of Technology in Gothenburg,Sweden, a 100 kW chemical looping combustor has been built.This project aimed to investigate to what degree air can replace helium as the uidizinggas for uid dynamical studies in a CLC cold ow model of the above mentioned 100 kWfacility. Experiments were performed using air and helium separately as uidizing gas andpressure data were obtained, which formed the basis for the comparison. The project alsoaimed to investigate uid dynamics in the uidized bed and study when the risk of sluggingoccuring was greatest. The results were presented in the form of figures and tables dividedinto pressure, concentration and standard deviation of the pressure.The results obtained showed that air as uidizing gas did not create the same uid dynamicsas helium over the entire Fuel reactor.

A method for measuring the total impulse from a multi hole diesel injector, introduced inprevious thesis work, ?Development of a method and a device for measuring the momentumrate of Fuel sprays?, by Mikael Lindström, has been further developed and tested. The conceptis to simultaneously deflect all sprays from a multi hole diesel injector by using a bell shapeddeflector. The Fuel sprays are deflected straight down from their initial umbrella angle, andthe resulting deflection force is measured in a thin strained section of the load cell. The strainis given by three strain gauges, with quarter-bridge circuitry for each gauge.

As the Swedish governments long term goals include a reduction of fossil Fuel dependency, increasing pressure is placed upon energy companies to create and develop new solutions for renewable energy. The following case study was done in collaboration with the company Sydved Energileveranser AB and one of their contractors, Enarssons Skogsentreprenad AB. The objective of the study is to examine the bioenergy situation in region of Skåne and evaluate the potential solutions in the region for a forest-Fuel assortment, based on a bioenergy-cutting-system. As a part of this study I have compared ordinary manual cuttings done with a chain saw and cuttings made using the new ?bio- energy cutting system?. The cuttings made under both systems were tested in areas near agricultural fields or pasture land in order to maintain an open landscape.

To reduce emissions of carbon dioxide (CO2) Carbon Capture and Storage (CCS) technologieshave been developed. Chemical Looping Combustion (CLC) is a CO2 capture technologywith the CCS framework, and at Chalmers University of Technology in Gothenburg,Sweden, a 100 kW chemical looping combustor has been built.This project aimed to investigate to what degree air can replace helium as the uidizinggas for uid dynamical studies in a CLC cold ow model of the above mentioned 100 kWfacility. Experiments were performed using air and helium separately as uidizing gas andpressure data were obtained, which formed the basis for the comparison. The project alsoaimed to investigate uid dynamics in the uidized bed and study when the risk of sluggingoccuring was greatest. The results were presented in the form of figures and tables dividedinto pressure, concentration and standard deviation of the pressure.The results obtained showed that air as uidizing gas did not create the same uid dynamicsas helium over the entire Fuel reactor.

To reduce emissions of carbon dioxide (CO2) Carbon Capture and Storage (CCS) technologieshave been developed. Chemical Looping Combustion (CLC) is a CO2 capture technologywith the CCS framework, and at Chalmers University of Technology in Gothenburg,Sweden, a 100 kW chemical looping combustor has been built.This project aimed to investigate to what degree air can replace helium as the uidizinggas for uid dynamical studies in a CLC cold ow model of the above mentioned 100 kWfacility. Experiments were performed using air and helium separately as uidizing gas andpressure data were obtained, which formed the basis for the comparison. The project alsoaimed to investigate uid dynamics in the uidized bed and study when the risk of sluggingoccuring was greatest. The results were presented in the form of figures and tables dividedinto pressure, concentration and standard deviation of the pressure.The results obtained showed that air as uidizing gas did not create the same uid dynamicsas helium over the entire Fuel reactor.