Fuel pellets are a refined bio fuel mostly consisting of residues from sawmills and wood industry. At Rindi Västerdala AB's combined bio energy plant in Vansbro fuel pellets are produced, while the waste heat from the process is used for district heating. The pellets are produced from sawdust, wood shavings and dry wood chips that is dried, milled and pressed into small cylindrical rods. The advantage of refining the wood material in this manner is that the energy value is greater per unit volume and unit weight, thereby the cost of transportation per energy unit is reduced. Also, less storage space is needed.Pellet manufacturing is a complex process since many parameters affects the final results.

With the elevated oil prices of today it is necessary to look for other heating alternatives. If the oil price continues to develop in the same way it has done the last years it will soon be impossible for many producing garden companies to survive. The purpose of this diploma work is to compare three different fuel options in order to find the most economic one considering the conditions of Katrinebergs Handelsträdgård AB. In relation to oil it is profitable to change to any of the three alternatives: wood chips, wood pellets and grain. The most profitable option is to change to wood chips. This alternative has a payoff time less than three years and after that the annual saving compared to the oil is relatively high. The annual cost is 65 % of the cost of the oil alternative.

This thesis is done in cooperation with SWECO Energuide in Växjö. They have been assigned by SKB in Oskarshamn to renew their electrical power supply and the ancillary processing systems in their Central provisional storage of spent nuclear fuel, CLAB. Today in the CLAB facility, the spent fuel is cooled down with water pumps, driven by asynchronous induction motors, where the water is regulated by mechanical valves to the desired flow. After the upgrade, the engines will be powered by AC drives that can control the pumps by changing the rotational speed and thus change the water's cooling effect on the nuclear fuel. In this study, I investigated the interference AC drives causes the feeding network and how to go about averting them.

The study was carried out as a time study of five wood chippers placed on trucks,so?called huggbilar. They are trucks with built?in wood chipper, chip bowl and crane pulling a chip trailer. The system is used for chipping wood fuel, transporting, and delivering the chips to heating plants.

This study explores the effects of two different post-treatment methods on stain reduction in glazed creamware from the late 20th century. The objects stains have been characterized by type one and type two stains which is the result of prolonged contact with food residues, were subjected to the same initial stain reduction. The two post-treatment methods examined are soaking the objects in deionized water and surface rinsing with deionized water. The comparative analysis included photographs under normal and UV-light exposure to assess stain visibility, weight measurements before and after treatments to monitor the absorption and evaporation of liquids, and observations throughout the experiment. The results revealed that while type two stains showed significant alterations after treatments, specifically after soaking, type one stains remained unaffected by both methods.

Turboaggregat med variabel geometri har länge funnit hos automobiler, men det dröjde ända tills 2008 innan det första dök upp på ett fartyg. Syftet med denna undersökning har varit att kontrollera om de fördelar som Man B&W hävdar att VTA-aggregatet skall ha stämmer, samt att undersöka om VTA-aggregatet kan lösa de problem som uppkommer i och med att man kör med reducerad fart, s.k. slowsteaming. För att undersöka detta har jag bedrivit litteraturstudie, med insamling av data mestadels från Internet.Resultatet av undersökningen visar på att ett VTA-aggregat kan minska bränsleförbrukningen och vissa emissioner vid reducerad fart jämfört med en konventionell turbo av samma storlek. Den minskade bränsleförbrukningen leder i sin tur till ekonomiska vinster.

The market for biofuels from the forests have had a positive development and the job initiators for this master´s thesis wanted to examine the profitability of a method for harvesting forest fuel, which was unfamiliar to them. The method was the ?long tree tops-method?, here called the LT-method. The LT-method is characterised by the fact that timber is harvested as the only roundwood assortment while the rest of the stem, which in other cases would become pulpwood, is harvested as forest fuel together with the logging residues. The method is based on the assumption that advantages in handling of the forest fuel assortment such as increased load weights for forest hauling and truck transportation, should compensate for the lower price for pulpwood when sold as forest fuel. The aim of the study was to compare the profitability of the LT-method with the GROT-method (harvest of timber, pulpwood and logging residues) and conventional logging without any harvest of forest fuel, and aslo to try to identify factors affecting the profitability of the different methods.

In this final thesis two simulation models have been integrated. The simulation models are models of JAS 39 Gripen?s fuel system, software and hardware. The time consuming and costly work to develop software has made the department of fuel system to build two models in Xmath/Systembuild. The software model also simplifies the comprehension of how the software in the control computer of the fuel system works.

Active headsets have been on the market for years and now it is time for something else to enter the stage. The technology of active noise reduction can for exmple also be used in ventilation systems for reducing ventilation noise. An active control system principally consists of four important components, namely the downstream error microphone, the upstream detection or reference microphone, the digital signal processor (DSP) and a loudspeaker. The upstream reference microphone listen to the primary ventilation noise and sends it to the DSP which makes a phase shift to the signal and sends it to the loudspeaker. The loudspeaker sends out the opposite waveform of the incoming one and reduce the primary ventilation noise.

Mindfulness-Based Stress Reduction (MBSR) har framförts som en lämplig metod för lindring av stress hos friska, men stressade människor. Effekten av MBSR på stress hos personer utan psykiska eller fysiska sjukdomar undersöktes genom en litteraturgenomgång av artiklar som behandlar experimentella utvärderingar av MBSR. Resultaten visar att MBSR är en verksam behandlingsmetod, men också att de publicerade studierna har brister vilket motiverar fler utvärderingar med striktare kontrollmetodik..

Today when new and harder demands on CO2 emissions are developed, vehicle manufacturers must work to develop new engine solutions to new kinds of fuels to replace fossil fuels. A fuel that could be applied is hydrogen. When hydrogen is combusted only water vapor occurs. Hydrogen is known to be explosive and flammable. These properties are both good and bad for combustion.

Background and problem: In the last few years the threat against the environment and especially the emissions of carbon dioxide has become increasingly debated. The government have set up a goal to lower the emissions of carbon dioxide with 40 percent until 2020 compared to the level in 1990. The emissions in the transportation sector have, in contrast to the total emissions, increased since 1990 and will continue to increase unless powerful control measures are implemented. The lorry centres have to use strategies to answer to these external threats which lead us to the two questions of this thesis: - What methods do the lorry centres use actively and which do they consider as the most important methods for fuel saving? - Are there any differences which methods small, medium and large centres considers as important? Purpose: The main purpose of this thesis is to examine which methods lorry centres use actively and which they consider as important for fuel saving.

Active headsets have been on the market for years and now it is time for something else to enter the stage. The technology of active noise reduction can for exmple also be used in ventilation systems for reducing ventilation noise. An active control system principally consists of four important components, namely the downstream error microphone, the upstream detection or reference microphone, the digital signal processor (DSP) and a loudspeaker. The upstream reference microphone listen to the primary ventilation noise and sends it to the DSP which makes a phase shift to the signal and sends it to the loudspeaker. The loudspeaker sends out the opposite waveform of the incoming one and reduce the primary ventilation noise.

The use of bio energy in Sweden has increased during the last few years and with every passing year, bio energy produces 3-4 TWh´s more energy than the previous year. The increase in the use of bio energy makes it an interesting prospect for forest companies to produce bio energy from the forest. Sveaskog has a fairly extensive bio energy programme, mainly in southern and middle Sweden. Their activity regarding bio energy in northern Sweden has been very restrictive or even non-existent. Because of this, during the winter of 2003-2004, Sveaskog initiated a number of degree projects with the purpose of looking at the use of bio energy in northern Sweden.

För att skydda den europeiska produktionen av bränsleetanol har EU satt upp höga tullar på importerad etanol. Vi har analyserat hur marknaderna för socker och etanol fungerar i Brasilien och EU, därefter försökt förutse vilka samhällsekonomiska effekter ett borttagande av importtullen i EU kan ha. Vi finner att etanolpriset i EU sjunker, därmed ökar efterfrågan. Bensinkonsumtionen ökar på kort sikt i både EU och Brasilien, då ett lägre etanolpris medför ett lägre pris på bensin via den inblandningskvot av etanol som finns i vanlig bensin. På längre sikt kan så kallade ?flex fuel?-bilar bli allt vanligare och bensinkonsumtionen kan avta.