The expansion of the Swedish hydro power has contributed positively to the reduction of the environmental impacts from the fossil fueled power production. In the same time the extensive expansion has been proved to cause negative ecological and local environment impacts of a stream. This, in turn, has been affecting the biodiversity and fish stock negatively, which has been reduced. One of the underlying problems is the lack of possibility for the fish to pass the plants, but it is also directly correlated to the mortality rate of the fish passing through the turbine, which this study is investigating.The mortality rate has been computed for three different locations in Sweden, Untra, Tännfallet and a third one whose location is confidential, and is denoted as Case 1, 2 and 3. The model used to calculate the mortality rate in this investigation is based by existing blade strike models and knowledge and are investigating the death due to mechanical injuries from collision with a runner blade in the turbine.

Too high levels of noise lead to various health problems and cost society billions of SEK peryear. In this thesis we have examined a model of the A40E articulated hauler at VolvoConstruction Equipment in Braås. We have tried to reduce cabin noise in an articulated hauler,while also providing a way on how to proceed with a machine when the cabin does not measureup to the sound requirement. The best way to find leaks were with a reference source of model4205 and its speaker HP 1001 from Brüel & Kjaer in the cab and then walk around and listen towhere the reference source was more prominent. In this way, we found that the edges and theplugs were sensitive areas.

Many workplaces around the world use some kind of presentation software as an aid during presentations. At Westinghouse Fuel Service in Västerås they experienced that they didn´t know how to use this medium to its fullest extent. They wanted to increase awareness of presentation skills with PowerPoint among the employees, to improve their internal and external communication. A desire they are certainly not alone to have in the working life.My research studied how to design guidelines for the use of presentation software, so the users can easily absorb the message and find motivation to use the guidelines. In order to adapt the guidelines to their users, and thus create major opportunities for them to absorb the message, I based my study on the concepts legibility, readability and reading value.

The smelting process at Sapa Profiler AB in Sjunnen generates large quantities of waste heat which is absorbed by the cooling water when the aluminum is cooled down. This paper is the result of a Master?s Degree Project aiming to present the conditions for recycling the waste heat. The cooling water absorbs the heat from the aluminum at an average rate of 600 kW and the paper shows that it can be used to replace electrical power consumption for heating the production plant?s facilities.

The ferry traffic to Gotland is essential for the island?s ability to live and develop. Yearly, it transports 1,6 million passengers, 500 000 personal vehicles and 750 000 lane meters of freight with four Ro-Pax ferries. The traffic is controlled and subsidized by the Swedish government since 1971 in order to guarantee the inhabitants and industry of Gotland a satisfactory transportation service. As a consequence of the past decades increased traffic quality, mainly due to a decrease in crossing times, the traffic?s environmental impact and costs has also increased.The Master Thesis proposes a new energy efficient traffic arrangement that satisfies the users? preferences in the same extent as today.

Sweden's government is dedicated to the goal of having a vehicle fleet that is independent of fossil fuels by 2030. Achieving these goals requires, among other things, new types of fuel that give lower net emissions of carbon dioxide. The present market includes stations offering lowlevel blends of renewable fuels in conventional diesel as well as some stations offering renewable fuels only. The purpose of this study is to survey purchasers? attitudes to the use renewable fuels in roundwood and bioenergy transport in forest- and energy companies. The study was based on qualitative interviews through a combination of face-to-face meetings and telephone interviews with each sample group. The total number of respondents was ten (10), consisting of five (5) from forest companies and five (5) from energy companies. Transport service purchasers were generally positive to renewable fuels and considered these necessary in the future.

This report relate a concept study that consider a number of different proposals to improve the overcharging system in BAE Systems Ha?gglunds tracked vehicle series BvS10, to maintain sealevel power at extreme altitude.At high altitude the power losses beacuase of the air density that decreases, which results in less fuel can be burned. The decreasing of air density also gives rise to fatigue failure of the turbocharger unless power is reduced.The proposals shall be as required by BAE Systems Ha?gglunds economically sustainable and defensible from a packing perspective. That means the selected solution must have a reasonable price tag and at the same time a minimal impact on adjacent components.The basis for this thesis is based on benchmarking of both the auto industry as the flight industry, to find inspiration and tips for improvement.Some of the concepts have after gathering facts and calculations been excluded while other solutions has been considered as workable and thus interesting for BAE Systems Ha?gglunds.Initially the current turbochargingsystem was analyzed in order to determine the starting point and thus be able to fix the current problems surrounding high altitude driving.

This thesis examines the way that subversivity is produced in relation to the name of the author, as understood by Foucault, and what potential for ressistance that can be glimpsed there. This from the reading of three text that in different ways relate to that theme.Firstly, throught the reading of "Isis mamma a?r genusvetare, skribent och konstna?r, min mamma a?r f.d. sta?derska, kokerska och dagisfro?ken, numera fo?rtidspensiona?r med diagnosen fibromyalgi" by Lidija Praizovic?, a text that actively work with the internal production of different exteriorities.

Organisation and market orientation of elderly careThis comparative literature study is intended to describe how elderly care is organised and financed in Germany and Sweden. Furthermore, it analyses the degree of competition and market orientation in both countries' care systems. Important aspects in this context are the kinds of measurements which are used on the two markets and the question if there are quasimarkets.The theoretical backgrounds of the study are Esping-Andersen's "Three Worlds of Welfare Capitalism" and Harold Wilensky's convergence theory. Esping-Andersen's theory describes Sweden as a social democratic and Germany as a conservative welfare regime which means that there are different conditions for the development of welfare. The use of Wilensky's theory shows that both welfare systems are converging since the end of the 20th century.

The purpose of this literature review was to describe if the nutritional balance of the fats, carbohydrates, proteins and fibers can lead to weight reduction and to improve glucos-/blood lipid for individuals with obesity and type 2 diabetes. The method used was a literature review. Twenty-two scientific articles were chosen, which were consistent with the study purpose and questions. The articles were selected based on searches in the Medline database by PubMed. The keywords used were type 2 diabetes mellitus, diet, obesity, comparative, fat, carbohydrate, low carbohydrate, high fat and saturated fat.

A change towards using more biofuels than fossil fuels is taking place in Sweden, and in many other parts of the world. This makes the use of fuel pellets increasingly popular, causing a greater demand for sawmill sawdust products. There is a trend towards the use of multiple types of shredders, instead of a single type in each sawmill. The purpose of the study was to characterize the different flows of saw particles that can be found at Sävar såg when cutting thick or thin wood with different cutting techniques. The saw particles size, shape, moisture content and heat value were analysed by the cutting stations: first cutting fast and slow, second cutting fast and slow, grading fast and slow and planning.

When stormwater occurs near human activity the water gets polluted. The purity and composition vary widely depending on the types of activities in the area, the type of surface the water comes in contact with, precipitation and many more parameters. It has long been known that stormwater quality can affect both human health and the environment as stormwater is a major contributor to pollution of receiving waters.A human activity that has an impact on the environment in several different ways is traffic and stormwater is no exception. Airborne gases that react with precipitation, oil leaks and fuel systems that drops down on the ground, metals from brake linings and rubber particles from tire wear are some of the aspects you have to take into account when categorizing the relationship between traffic and polluted stormwater.In this project, stormwater samples from a parking lot in Halmstad, Sweden were collected and analyzed with an atomic spectrophotometer. The presence and relationship between copper, cadmium and zinc with different rainfall parameters have been studied.

The Swedish Parliament has decided to increase the share of electricity produced by wind power. The same parliament has decided that the Sami have the right to herd reindeer over 50% of the country's land area. In this literature review the potential impact wind power development and associated infrastructure may have on reindeer husbandry conditions are examined. The unique physiology of the reindeer enables it to live out of grazing in the arctic climate in the north of Sweden. For reindeer husbandry to be long-term productive and sustainable, it is important that there is enough land for grazing. The research available on how reindeer are disturbed by human activities such as roads, mines, hikers, etc., clearly indicates that the reindeer avoids areas close to such disturbance.

This report is a documentation of the workflow and the result of a project carried out by twostudents from the Royal Institute of Technology in collaboration with a company. The report isstructured in a chronological order and describes the methods and systems developed in theworkflow. The report shows how the project evolved from a study phase to the various proposals onthe concept solutions.The project aims to develop a systematic way of bonding two different kind of cardboard under fiveminutes. By conducting a general study about glue and its different forms it was possible to obtain abroad knowledge, which helped to choose the right substances to later use in testing on the differentcardboard materials in question. Glues's survey resulted in a list of different substances that wererelevant to the project.

Due to increasing regulations regarding new diesel vehicles particulate matteremissions the new Scania truck, Scania Euro 6, has been equipped with a particulatefilter. This component effectively stores the particles in the exhaust gas but must becleaned in order to prevent itself from clogging. The filter is cleaned through aprocess named regeneration which is a thermodynamic process in which thetemperature of the filter is raised through fuel supplied to the exhaust gas.The purpose of this thesis is to contribute to the development of improved controlstrategies of the temperature during the regeneration process through thedevelopment of model-based controllers. These controllers are designed in order tohave good performance in stationary as well as automatic regeneration.In order to develop these model-based controllers a model of the system isconstructed. The model is described as a linear thermodynamic grey-box model withflow varying parameters, showing good results in validation.The model provides a simulation environment during the controller design, which isfocused around the development of linear regulators with the exhaust gas mass flowas a scheduling variable whose size determines controllers? mode of operation.