The aim of this report has been to investigate the use of electricity energy before and after a conversion of foodservice. The ambition was also to highlight the food safety and the retention of nutrients in relation to the conversion. The methods being used were qualitative interviews, case studies, study visits and literature. The equipment and the use of energy was the same in 2008 as in 2011 for hot-holding of the tested component, sauce with ham. The chilled system used more than three times the energy and cost for one portion than one portion in the hot-hold system.

In this final thesis two simulation models have been integrated. The simulation models are models of JAS 39 Gripen?s fuel system, software and hardware. The time consuming and costly work to develop software has made the department of fuel system to build two models in Xmath/Systembuild. The software model also simplifies the comprehension of how the software in the control computer of the fuel system works.

Organizations that want to maintain a good innovation capability can seek knowledge both within and outside its boundaries. Opening up innovation processes, through so-called open innovation, allows organizations to combine internal and external knowledge sources in order to include previously excluded perspectives to the innovation process. This study examines how knowledge is created and transferred when conducting open innovation through crowdsourcing. It is done based on Nonaka?s (1991; 1994) theory of how knowledge is created through conversion processes, where implicit knowledge can be converted into explicit knowledge and vice versa.

A Swedish electronics company wants to make the cooling of one of their electronic components more efficient. They propose that a retrofit liquid cooler is the way to achieve this goal. The current air cooling has high energy cost due to the high amount of power needed to power fans and heat exchangers. Using high volumes of air for cooling also leads to noise pollution. The conversion from air to liquid cooling would possibly make the operation of the electronics more cost efficient and less noisy.The purpose of this project is to theoretically evaluate different concepts of drawing the heat generated by the electronic component in to a fluid, using numerical calculations in Matlab and FEM simulations in ANSYS.

AbstractMotor sports have been around as long as motor vehicles have been. Sports are often seen as costly polluter but in the same time the motor sports have encourages a large part of development, both for vehicles and other industries. Inventions like rear mirror and ABS brakes come from motor sports. One way to once again drive development forward while making motor sports carbon-neutral is to run the race cars on hydrogen. In this thesis, the goal is to convert a spark ignition engine for hydrogen operation.

Today when new and harder demands on CO2 emissions are developed, vehicle manufacturers must work to develop new engine solutions to new kinds of fuels to replace fossil fuels. A fuel that could be applied is hydrogen. When hydrogen is combusted only water vapor occurs. Hydrogen is known to be explosive and flammable. These properties are both good and bad for combustion.

Background and problem: In the last few years the threat against the environment and especially the emissions of carbon dioxide has become increasingly debated. The government have set up a goal to lower the emissions of carbon dioxide with 40 percent until 2020 compared to the level in 1990. The emissions in the transportation sector have, in contrast to the total emissions, increased since 1990 and will continue to increase unless powerful control measures are implemented. The lorry centres have to use strategies to answer to these external threats which lead us to the two questions of this thesis: - What methods do the lorry centres use actively and which do they consider as the most important methods for fuel saving? - Are there any differences which methods small, medium and large centres considers as important? Purpose: The main purpose of this thesis is to examine which methods lorry centres use actively and which they consider as important for fuel saving.

The aim of this study is to examine the understanding, preschool teachers, have about their work related to energy conversion in the human body. Through individual interviews, answers have been sought to the following questions: What do the preschool teachers believe they need to know about the link between food and energy? What are the different methods preschool teachers use to workwith the area of energy conversion in the human body?The results show that preschool teachers have knowledge in terms of food and its nutrients as an energy source for the body to cope with. However the more thorough and detailed questions become all the more uncertainty there is about the topic. Preschool teachers on their own initiative do bring up the topic with the children and begin conversations as well as ask questions, perform experiments and demonstrations.

The use of bio energy in Sweden has increased during the last few years and with every passing year, bio energy produces 3-4 TWh´s more energy than the previous year. The increase in the use of bio energy makes it an interesting prospect for forest companies to produce bio energy from the forest. Sveaskog has a fairly extensive bio energy programme, mainly in southern and middle Sweden. Their activity regarding bio energy in northern Sweden has been very restrictive or even non-existent. Because of this, during the winter of 2003-2004, Sveaskog initiated a number of degree projects with the purpose of looking at the use of bio energy in northern Sweden.

The product structure of the fuel tank installation is one of the most complex product areas at Scania. Caused by the number of parameters, which affect the fuel tank installation, a product structure is created which is very difficult to handle. Knowledge exist that the structure in a nearby future will be considerable more complex. The purpose of the study has been to understand in why this complexity exist and find ways to break the trend of a growing product structure. The goal was to achieve a more standardized fuel tank installation.A theoretical study was performed in order to bring knowledge in relevant areas both in general theory but also in documentation at Scania.

För att skydda den europeiska produktionen av bränsleetanol har EU satt upp höga tullar på importerad etanol. Vi har analyserat hur marknaderna för socker och etanol fungerar i Brasilien och EU, därefter försökt förutse vilka samhällsekonomiska effekter ett borttagande av importtullen i EU kan ha. Vi finner att etanolpriset i EU sjunker, därmed ökar efterfrågan. Bensinkonsumtionen ökar på kort sikt i både EU och Brasilien, då ett lägre etanolpris medför ett lägre pris på bensin via den inblandningskvot av etanol som finns i vanlig bensin. På längre sikt kan så kallade ?flex fuel?-bilar bli allt vanligare och bensinkonsumtionen kan avta.

Denna studie handlar om den fartförlust och därmed den ökade energiförbrukningen som drabbar fartyg på grunt vatten. Syftet var att ta reda på hur mycket kortare en grund passage behöver vara för att den ska vara ett bättre alternativ än en lång och djup rutt med hänsyn till bränsleförbrukning och tidsåtgång. Resultatet av detta blev att det inte går att dra några generella slutsatser som gäller för alla fartygstyper men att det går att se tydliga tendenser. Studien hade även som målsättning att skapa ett underlag som skulle kunna användas av nautiker vid planering av resor, detta presenterades i form av en sammanställning av de resultat som erhållits vid beräkning av fartförlust i öppet vatten. Någon sammanställning gjordes inte för begränsat vatten eftersom exempelfartygen där fick likadana resultat vilket skulle ha gjort en sådan överflödig.

Abstract Title: Ethanol for Scania?s future ? A scenario based analysis Authors: Anna Hansson and Julia Persson Tutors: Annette Cerne ? Department of Business Administration, Lund University Jonas Holmborn ? Head of Advanced Combustion, Engine Development, Scania Lennart Thörnqvist ? Department of Energy Sciences, Faculty of Engineering, Lund University Problem: Oil-based products are the dominating fuels in the transport sector but alternative fuels are currently challenging the world-wide dominance. The large number of alternative fuels that are under development at present makes the future fuel-market impossible to predict. Scania?s ethanol project is associated with a number of uncertainty factors that are beyond the company?s control.

A one-cylinder research engine has been used for studies with a Diesel Dual Fuel concept (DDF). DDF is a concept that utilizes a pilot diesel injection to ignite a homogenous natural gas/air mixture. Emissions and engine efficiency have been analyzed in an emission cycle called European Stationary Cycle (ESC) and the knock/pre-ignition problems with this type of engine have been investigated.At low and mid torque levels, an early diesel injection around 60 crank angles degrees (CAD) before top dead center (TDC) was used. At these loads raw NOxemissions was below EURO 6 level (0.2 g/kWh). NOxwas at EURO 5 level over the complete ESC without after treatment and with SCR at high loads it should be possible to reach EURO 6.One issue with DDF is the high HC emission levels.

The objective of the present study was to evaluate distillers? dried grains with solubles (DDGS) as a protein source to rainbow trout (Oncorhynchus mykiss), by studying digestibility and growth measurements. One control diet, totally lacking DDGS, and three test diets were made containing 10 % (low), 31% (medium) and 51 % (high) DDGS respectively on dry matter (DM) basis. The control diet and the test diets were made to be as nutritionally equal as possible. Wheat bran was used to balance the fiber content of the diets.