It is of increasing importance to in the most effective possible way, manage and control all the transactions of raw materials, products and information that are exchanged between an organization and all its operators. These flows and the need for strategy and managing the processes of planning, implementing and control of the supply chain, has given name to the concept supply chain management. Supply chain management involves all movement and storage of raw material, and all the processes that is needed to manufacture a product from origin to consumption. Globalization, technology and increasing time and quality-based competition are all driving forces behind the concept and reasons for an increasing interest in supply chain management.The purpose of this essay is to by using a qualitative case study examine which decisive success factors that can be identified for effective supply chain management. We have compiled different theories on the subject to use for analyzing a case study Li & Fung, who is a successful supply chain management company.

The swedish national board of housing, Building and Planning,recommends that all stakeholders in the construction industryperform a moisture control design to make sure that the buildingachieves good moisture resistance. Since June 1, 2006 there are nospecific requirements or quantitative values for air leakage.Although the swedish national board of housing does presentrequirement that the building envelope must be sealed so that theclient?s requirements for specific energy consumption and installedelectric power for heating purposes are met. Despite this, studiesfrom SP shows that few buildings meet the client?s requirements inspecific energy, which increases the risk of occurrence ofcondensation-related moisture damage.This study aims to evaluate curtain walls connections from airsecurity and moisture safety.

This diploma work addresses the question of how much energy is spent whenmanufacturing the components of a building as well as of how much energy is used inthe production of a building. The object of the studies is BioCentrum at the SwedishUniversity of Agricultural Sciences in Ultuna just outside the city of Uppsala. The aimof the work was to investigate how much energy was consumed when manufacturingand production in relation to the management, how many years the production wasrepresented. It was also a study in how mature the construction industry is to answerhow much energy was consumed in manufacturing.In order to get these answers a question form was developed and sent to thesuppliers to BioCentrum. In this form they were to respond to the quantity suppliedto BioCentrum and the amount of energy was spent when manufacturing thecomponents.

Vatten är en av jordens livsviktiga resurser, en resurs som hela tiden minskar. I delar av världen råder akut vattenbrist och ofta återfinns industrier med hög vattenanvändning i områden med begränsad vattentillgång. En av dessa industrier är textilindustrin. Vid textil beredning är vattenförbrukningen mycket hög och avloppsvattnet är ofta mycket förorenat. Vattenfrågorna inom textil produktion har fram till idag inte uppmärksammats i lika stor grad som arbetsrätts- och kemikaliefrågorna.

By comparing the experience off interaction in a life world with a drug habit and a life world without a drug habit you might find how they differ. We asked four former drug abusers in four semi structured interviews to describe their experiences off interaction under these two circumstances. The difference between the two life worlds when it comes to interaction is that in the drug abusing life world our informants describe that communicative action has to stand back for a more goal oriented action. In the drug free life world, communicative action on the other hand is experienced as the most important action. The difference is about wether interaction is goal oriented or oriented at understanding.

This thesis describes the development of a tank insert for diesel cars, from idea to a prototype. The idea is to design an insert which makes it impossible to refuel petrol in a diesel car. The insert shall be installed in the existing tank opening on diesel cars. The tank insert is designed for the Swedish company SverigeGrepen AB located in Vänge, just outside Uppsala. Their main product is a pitchfork that is ergonomically designed and durable.A pre-study were performed in which information relating to fuel caps, tank openings, petrol- and diesel nozzles were collected.

This study elucidates the perceptions of twelve people at an age between 35 and 50 years, on what influence intoxication and drunkenness in the bar environment. The purpose of this study is to create an understanding of the effect the intoxication has on the visitor in the bar environment and this is done through qualitative method interviews. The theoretical frame we use to analyse the empirical data, is divided in to four parts: set and setting, environment and its regions, social behaviour and genus perspective. The theoretical material, together with the empirical data in the form of the results of the interviews, forms the platform for this paper. It is on the basis of these results that our questions finally will be answered.

The purpose with this work that is the basis for this thesis was to help Nattavaara Economical association to develop a program for handling invoices, customer information, and storage. The program and this thesis have been done in cooperation with the economical association in Nattavaara. Some of the demands on the program are that it shall handle customer information, storage status, invoices and diesel consumption. The program must be able to printout invoices, reminders, delivery notes, a customer list and a storage list. All information will be stored in a database.

Fuel pellets are in Sweden mainly produced from sawdust and cutter shavings. Before the pelletising process the raw material is dried to attain consistent moisture content and ground up in a hammer mill. In the densification process (pelletising) the ground material is forced through holes in a rotating die. This heats up the wood particles which cause them to soften and self bond. After the process the pellets are cooled, sieved and bagged. The milling process creates a wide range of particle sizes.

The municipality of Kalmar have a problem, how to reach and communicate with young people in Kalmar. In today?s changing media environment it gets more difficult to stand out and reach audience with messages and especially with the new forms of media that has revealed. Therefore, we have been commissioned to develop recommendations on how the municipality of Kalmar can communicate with young people in Kalmar.  The purpose with this study is to investigate which media channels young people in Kalmar use and their attitudes towards social media in particular. We wanted to find out how the municipality should communicate to reach them and what attitude youths have against the municipality in general.

This thesis provides a good introduction to the American environmental certification system LEED, Leadership in Energy and Environmental Design, and trough compar-isons between Sweden and the United States an explanation to the systems design is given. The work is closely linked to a LEED Core & Shell project in Stockholm, Swe-den, where the goal is to reach the second highest rating in LEED - Gold.This thesis gives a broad description of the LEED system and a more profound study of the energy sector, Energy and Atmosphere. Here, for example, an analysis has been made of how the energy consumption of an imaginary building designed according to the requirements of the BBR (Swedish building code) performs in comparison to the Baseline building in LEED.The existing model of Borgarfjord 3, which served as a case study in this work, has al-so been modified to investigate the energy savings that could have been achieved by adding extra insulation to the building. A description of the problems, regarding how the Swedish district heating system (DES) is treated in LEED, is given as well as the suggested modifications. This is an issue that will be pursued during the process of shaping a new, international, version of LEED due to be launched 2012..

Bachelor thesis, Trolley Innovation Project, has been unique in the sense that it has been carried out over the borders of Sweden. Iacobucci S.p.A, located outside of Rome in Italy is one of the largest manufacturers of interior equipment for aircraft in the world. With approximately 30% of the market Iacobucci S.p.A is one of the world's largest manufacturers of catering trolleys.The aim has been to produce a new competitive catering trolley for the airline industry. With customers and users in focus, the project team found that weight, ease of use, ergonomics and design were important aspects. Having a low weight of all the interior is particularly important when there is lots of money for the airlines to save in reduced fuel costs.

Organic agriculture is financially promoted in Sweden by special environmental support and as consumers we are all encouraged to buy organic food. At the same time scholars at the Swedish University of Agricultural Sciences claim that organic farming does not provide any environmental benefits. The main criticism is that organic farming has lower yields than conventional, which means that more land is needed to produce the same amount of food as in conventional farming, leading to deforestation and loss of biodiversity. As for climate change, the critics claim that the significantly higher productivity in conventional crop production compared to organic, releases surplus land, which could be used for bio-fuel production and thereby replace the fossil fuels. The critics also claim that organic farming causes higher nutrient leaching than conventional.

The smelting process at Sapa Profiler AB in Sjunnen generates large quantities of waste heat which is absorbed by the cooling water when the aluminum is cooled down. This paper is the result of a Master?s Degree Project aiming to present the conditions for recycling the waste heat. The cooling water absorbs the heat from the aluminum at an average rate of 600 kW and the paper shows that it can be used to replace electrical power consumption for heating the production plant?s facilities.

Organic Light Emitting Displays (OLEDs) are a new type of thin emissive displays predicted to possess superior properties to existing techniques e.g. Liquid Crystal Display (LCD). The main advantages are low power consumption and a thin display structure. This report contains an explanation of the emissive OLED technology, its functionality and the physics of the organic layer structure in an OLED. The technology is described with respect to the two classes of organic materials used in displays, small molecules and conjugated polymers.