To reduce emissions of carbon dioxide (CO2) Carbon Capture and Storage (CCS) technologieshave been developed. Chemical Looping Combustion (CLC) is a CO2 capture technologywith the CCS framework, and at Chalmers University of Technology in Gothenburg,Sweden, a 100 kW chemical looping combustor has been built.This project aimed to investigate to what degree air can replace helium as the uidizinggas for uid dynamical studies in a CLC cold ow model of the above mentioned 100 kWfacility. Experiments were performed using air and helium separately as uidizing gas andpressure data were obtained, which formed the basis for the comparison. The project alsoaimed to investigate uid dynamics in the uidized bed and study when the risk of sluggingoccuring was greatest. The results were presented in the form of figures and tables dividedinto pressure, concentration and standard deviation of the pressure.The results obtained showed that air as uidizing gas did not create the same uid dynamicsas helium over the entire fuel reactor.

This report was performed in order to evaluate a new technological measure and focuses generally on a heat pump system to a HWC-washing machine. The client is Asko Appliances AB, a company well known for its environmentally friendly products. The goal of this study was to improve the energy efficiency of a washing machine by combining a heat pump device to the heater of the wash water, in order to reduce the energy consumed for heating the water. Besides reducing the energy consumption in heating the water, the washing machine was required to meet low noise and short operating time specifications. For that purpose, nine trials in three test series have been carried out.

This thesis work is the last part of the Master of Science education inmechanical engineering at KTH, Stockholm.The aim of this project was the development of a Multi-zone modelfor NOxformation in Diesel engines. Because of the stringent emissionlegislations, great effort is made to decrease the Fuel consumption and theharmful emissions of internal combustion engines. Computer simulationsplay a decisive role in this context because they substitute the expensiveand time-consuming laboratory tests.The model is based on a multi-zone approach and uses the wellknownExtended Zeldovich Mechanism which gives a relation to calculatethe NO formation rate using the concentration of different gas speciesinvolved in the process.All the most important phenomena involved in the Diesel combustionhave been modelled. A special attention is then paid to the equilibriumconcentration calculation; this is a significant part of the model whichstrongly influences the following steps.A Simulink model has also been developed. This second version isbased on the previous model and it is made especially to allow theconnection with other external softwares, GT-power in this case.

To reduce emissions of carbon dioxide (CO2) Carbon Capture and Storage (CCS) technologieshave been developed. Chemical Looping Combustion (CLC) is a CO2 capture technologywith the CCS framework, and at Chalmers University of Technology in Gothenburg,Sweden, a 100 kW chemical looping combustor has been built.This project aimed to investigate to what degree air can replace helium as the uidizinggas for uid dynamical studies in a CLC cold ow model of the above mentioned 100 kWfacility. Experiments were performed using air and helium separately as uidizing gas andpressure data were obtained, which formed the basis for the comparison. The project alsoaimed to investigate uid dynamics in the uidized bed and study when the risk of sluggingoccuring was greatest. The results were presented in the form of figures and tables dividedinto pressure, concentration and standard deviation of the pressure.The results obtained showed that air as uidizing gas did not create the same uid dynamicsas helium over the entire fuel reactor.

The master thesis, conducted at Metrima AB, concerns the development of a non-intrusivedistribution meter as a basis for individual tap water billing in apartments.The project is conducted in response to the market interest in individual tap water billing inapartments as an answer to environmental concerns regarding water consumption. Due to thehigh installation cost of traditional water meters, a new method of determining waterconsumption, without having to cut water pipes, is proposed.The proposed method distributes the total water consumption for an apartment complex toindividual apartments according to distribution meters, measuring water run-time, in eachapartment. The water run-time is estimated by measuring the water pipe?s outward vibrationsand temperature changes.A test environment was established and a prototype built, using a tilt- and vibration sensor forvibration sensing and a precision temperature sensor to measure temperature changes. As bothsensors work well in the test environment, further testing was done in 3 apartments for aduration of 5 days.

Intelligent IT-based solutions, often called Smart Grids, are considered to be the future balancers of renewable energy sources. One area within the Smart Grid concept is called demand response, which is focused on making customers more consumption flexible by making them more active in their consumption. In this thesis the aim is to analyze a business model by investigating the income potential for a demand response solution as well as its market potential. This has been done through literature studies, interviews and development of a computational model.The use of 5000 households with flexible consumption can provide a cost reduction of 17.2% or 2.4 million SEK for a balance responsible party during an average year. If the solution is used to make strategic bids on the regulation markets the study indicates that the largest potential for revenues lies within this strategy.

To reduce emissions of carbon dioxide (CO2) Carbon Capture and Storage (CCS) technologieshave been developed. Chemical Looping Combustion (CLC) is a CO2 capture technologywith the CCS framework, and at Chalmers University of Technology in Gothenburg,Sweden, a 100 kW chemical looping combustor has been built.This project aimed to investigate to what degree air can replace helium as the uidizinggas for uid dynamical studies in a CLC cold ow model of the above mentioned 100 kWfacility. Experiments were performed using air and helium separately as uidizing gas andpressure data were obtained, which formed the basis for the comparison. The project alsoaimed to investigate uid dynamics in the uidized bed and study when the risk of sluggingoccuring was greatest. The results were presented in the form of figures and tables dividedinto pressure, concentration and standard deviation of the pressure.The results obtained showed that air as uidizing gas did not create the same uid dynamicsas helium over the entire fuel reactor.

The building and plant sectors represent a large part of Sweden?s energy use. Putting energy requirements in public procurement as a tool for reducing energy consumption in the building and plant sectors is therefor an opportunity that operators can take advantage of. The aim of this thesis was to map the energy requirements in procurement that operators in the public sector use today in building and plant projects. The analysis was made with respect to if the energy requirements corresponded to the parts with large energy use in building and plant projects and also in which way energy requirements in procurement are written in the contract.

Under vårt sista år var vi intresserade av att ta reda på de problem som vi kan stöta på i våra yrkesroller som fartygsingenjörer. Arbetet tar upp de tekniska problem som uppstår p.g.a. de allt strängare kraven på minskade svavelutsläpp från fartyg. De tekniska problemen härstammar från de olika bränslekvaliteternas vitt skilda egenskaper. Som svar på dessa problem har det utvecklats tekniska lösningar varav två stycken har tagits upp i detta arbete.För att ta reda på vilka tekniska problem som kan uppstå tog vi del av den berörda utrustningens tillverkares erfarenheter enligt empirisk modell.

Sustainable design - a study on sustainable design and its incentives and barriersThe purpose of this study was to investigate the incentives and barriers existing within companies focusing on eco-design. The aim was also to examine the consumers? thoughts on eco-design and sustainable products. A further aim was to try to concretize important lessons for future work on sustainable production and consumption. Two methods were used for completing this study; a literature study and a practical study consisting of interviews with companies focusing on eco-design and a survey among students.

Biogas is a renewable energy produced through anaerobic digestion, which means that organic matter is degraded by microorganisms under anaerobic conditions. The produced biogas can then be used for cogeneration, electricity, heat or upgraded to vehicle gas. Eskilstuna Energy & Environment AB has four digesters at Ekeby water sewage treatment plant, Eskilstuna. One of the biogas reactor (RK4) is equipped with a jet-mixing system while the remaining digester uses top-mixing. The mixing system is an important parameter to achieve optimum operating conditions for the process regarding gas production and degree of digestion.

The market for heavy duty engines is constantly requiring engines that should be more andmore powerful, while still maintaining low Fuel consumption. As a result of increasing enginepower, the engine and coolant temperature increases as well due to insufficient coolingperformance (because of design issues, cost etc.).Also, emission legislations, both current and future, require more and more measures to betaken by engine manufacturers. One way of meeting the legislations is the use of cooled EGR(Exhaust Gas Recirculation), which also lead to increased coolant temperatures.Both these factors also naturally lead to increased engine oil temperatures, the consequencesof which are not thoroughly investigated.This thesis project aims to investigate effects of high temperatures on engine oil degradation,with focus on the greatest degradation process: oxidation. To do this several engine runs havebeen performed on a 310 hp engine with EGR to see what happens to the engine oil in a realengine when exposed to high temperatures. During the tests oil samples have been taken andanalysed for important parameters.As a complement to these engine tests some laboratory oxidation testing have also beenperformed, to be able to compare engine test data with laboratory tests.One goal of the project was to try to formulate an empirical oxidation model, which would beable to predict oil oxidation levels in an engine, given any running parameters.

Drain water heat recovery is an uncommon measure in multi-unit residential buildings. There istechnology available for the purpose but the knowing and experience of the heat recovery systems islittle. The purpose of this thesis is to evaluate the future potential of drain water heat recovery inmulti-unit residential buildings.A major part of the multi-unit residential buildings in Sweden were built during modernismen andrekordåren (1940?1975). Many of the buildings have worn out drain and water supply systems andmany are in need of a general refurbishment.

The European Council agreed in 2008 on a climate and energy package to combat global warming. This package is valid for each EU member country and means that greenhouse gas emissions must fall by at least 20% and the EU's energy use to 20%, consisting of Renewable Energy in 2020. The Swedish Government has set stringent climate and energy with the intention to set an example for the rest of Europe. For example, renewable energy sources account for at least 50% of energy use and our climate emissions to fall by 40% by 2020. A combination of these goals and a steadily rising oil price has led to an increased demand for wood fuel in the form of such branches and tops.

With today´s power uprates in BWR reactors the bundle lift force has become aproblem. The lift force is calculated using a best estimate approach and the resultfrom the calculation should pass the existing lift force margin. Lift force margin isdefined so that the lift force may not exceed 80 % of the fuel weight. The margin issupposed to cover all the uncertainties that exist in the lift force calculations.However, no uncertainty analysis has been conducted to quantify the uncertainties.In this report the uncertainties in the lift force model have been quantified. Each inputparameter to the lift force model which has been assumed to have an uncertainty isassigned a probability distribution.