This project examined the possibility to create an electronical aid with the purpose of increasing environmental awareness and to design the aid in a fashion that inspires other to develop similar applications. The impact of car traffic was examined, and the base of the aid was built up in modular form to simplify the hardware aspect. For the active, data processing part of the aid the Arduino platform was chosen because of its simplicity and big possibilities of help in different internet fora, for those who choose to create similar applications in the future. The main part of the project var the use of real-time information from the car?s on board diagnostics.

Rapporten avhandlar modelleringen av en befintlig industribyggnad och dess tillvägagångssätt. I rapporten har även utredningar och studier granskats kring neutrala filformat, laserscanning och byggprocessen i allmänhet då dessa omnämnda ämnen går hand i hand och utgör fundamenten i modellerings-projekt. Projektet som författarna modellerade var det befintliga renseriet på Södra Cell i Mönsterås. Intervjuer som kontinuerligt utförts med berörda personer framgår under genomförande delen..

The aim of this report is to give a picture of how attitudes and behaviours of owners of environment cars look like and how they can be influenced. The alignment lies on environmental cars which run on biogas and ethanol which both are renewable fuels. The starting point is to sort out if it is environmental thinking that controls the choice and use of an environmental car. The feeling is that there are many other factors that can be more controlling, for example the price and the quality of the car. The result of the questionnaire survey which is the foundation of the report shows however that those who buy an environmental car do it mostly because of environmental reasons.

Studies of modern communication media such as Cell Phones and so called Instant Messengers are popular today. This study focused on these modern techniques, focused on parents as a target group and on what is important for them in everyday communication.By exploratory using three focus groups it became clear that the children, and the link to them was the absolute most important thing for the parents. It became clear that this link to a great extent today exists through the mobile phone.In a following study a Mobile Instant Messenger called My Friends was introduced. It was used by two families during two weeks to see how it would change the communication within the family. The focus was to see how problems with availability were handled, it turned out that:My friends had a more obvious way of indicating availability than the Cell Phone had.

Storage of biomass is often associated with problems such as heat development, dry matter losses and reduction of fuel quality. The rise in temperature can potentially cause a risk of self-ignition in the fuel storage. Moreover, emissions from storage piles can cause health problems in the surrounding. The dry matter losses and reduction of fuel quality can have economical effects. The aim of this thesis project is to develop guidelines on how to store large amount of biomass at Vattenfalls heat and power plants in an optimal way.

The work has been carried out in cooperation with the company Zenit Design in Malmö. The project's goal was to restore, improve and produce an ozone generator. During the project, the authors sought relevant literature in databases, been in contact with US suppliers of Fuel cell membranes, Asian suppliers for the processing of Teflon and Titanium parts in mechanical engineering and Swedish suppliers of various standard components. The authors had access to a temporary lab at Zenit and electron microscope at Halmstad University where material tests were performed. The authors have also had access to measurement equipment to measure amounts of ozone.During the work, the authors have mapped how an existing ozone generator works and then have their own development.

The objective of this M. Eng. Diploma work was to validate the new version, CASMO-5M, and compare the results with CASMO-4E, by using the same input in both programs. The tasks that were included in this work was to compare TIP-measures, k-effective curves (warm), k-effective curves (cold), the effect of void on k-effective, the isothermal temperature coefficient (ITC), the moderator temperature coefficient (MTC), damping ratio calculations, internal effect in a fuel bundle of a BA-rod, the speed of BA-out burn, impact of xenon, falling control rod, margins and isotopes.The TIP-measures showed that the differences were small for all reactors, at most, 6% nodal improvement by C5M (Casmo-5M) for Oskarshamn 3. The warm measurements of k-effective showed that C5M had a higher value for all cycles of Oskarshamn 1, 2 and 3 in comparison to C4E (Casmo-4E).

All products will eventually end up as waste, which in a sustainable society has to be handled in an efficient and environment friendly way. This report focuses on waste fractions meant for combustion, often difficult to characterize. However, more homogeneous fractions that are treated biologically are also discussed.The study concerns the region of Borås, Sweden, where the waste plant Sobacken has provided a good starting point. On this site, fuel to the Energy-from-Waste plant of Borås Energi is prepared and the biological waste is treated through anaerobic digestion.One important part of the study has been to collect experience-based knowledge from the technical staff at Sobacken and Borås Energi. This information was compiled into an overview of wanted and unwanted fractions to the preparation plant and the boilers respectively.

The purpose of the present study was to investigate the cow-level association between acute hoof lesions and the somatic milk cell count in dairy cattle. Cows from three loose-housed Swedish dairy herds were enrolled in the study if they had an acute hoof lesion treated by a veterinarian or professional hoof trimmer during the preceding year, according to farmer records. Studied lesions were sole ulcer, dermatitis, interdigital necrobacillosis and hoof abscess, in each case causing lameness. For each hoof-diseased cow, 0 to 3 healthy cows were included, matched with respect to herd, breed, parity and lactation stage. Cell counts were obtained from monthly test recordings from one month before to three months after the hoof-lesion diagnosis, and log-transformed.

The aim of this study was to develop a simple model for calculating stock costs for bio fuel at Billerud Karlsborg and subsequently recommending a suitable stock level of bio fuel. The stock components considered in the model are GROT (branches and tops), bark, dry wood chips, raw wood chips from barking and sawdust. The calculations are based on a probability distribution of historical deviations between ordered and delivered volumes. The model presents two different ways to manage the supply in case of irregular deliveries. The first way is to stock enough volume to cover the deviations and the second way is to compensate with a quick purchase from the spot market (at extra high purchase prices).

This report was written as a final thesis within the Department of forest economics at the Swedish University of Agricultural Sciences as a completion of the M.SC Forestry programme. The aim of this study was to create a model that, with respect to given stock levels, temperature, fuel usage and fuel price, would identify the optimal levels for purchase of bio fuels, optimal levels of incineration of bio fuels and the sum of the present values of all costs. The model would be applicable for a larger district heating plant. Data regarding temperature were received from SMHI. Information considering fuel prices was taken from the Swedish Forest Agency and the facts about fuel usage were collected from a large district heating plant, located in the southwest of Sweden. For the temperature, a sinus curve was adapted to describe the temperature over a year.

Denna rapport består av information och data som har samlats in i syfte att kunna presentera en genomförbar konvertering av linfärjan Toras framdrivningssystem, som idag utgörs av dieselelektrisk drift, till bränslecellsdrift. Den bränslecell som behandlas i rapporten är PEMFC och är en bränslecellstyp som drivs av ren vätgas. Resultaten tjänar som en informationskälla för en potentiell konvertering och presenteras för Trafikverket, som ett alternativ i linje med Sveriges regerings mål att reducera mängden CO2 utsläpp på en nationell nivå. Informationen i rapporten har insamlats via mail- och telefonkontakt samt ett besök på Tora på plats i Stockholm. Ett genomförande av konverteringen är fullt möjligt men mer kostsamt än dieseldrift i dagsläget med avseende på höga bränsle- och inköpskostnader utav bränsleceller.

Recent turmoil surrounding nuclear power as an energy source, especially since the accidentat Fukushima, has largely contributed to the debate of whether or not nuclear power should beused as an energy source. This study has examined the economic feasibility of replacingForsmark?s 3rd nuclear reactor with a bio fueled power plant, and find out how this could bedone.The power generation that has to be replaced is equal to 1170 MWe. To replace this, 6 largescaleCFB-boilers, each providing over 200 MWe, were necessary. In addition to this, eachboiler required their respective turbine sets, comprising one high-pressure-, and one lowpressureturbine with intermediate reheating capacities.Based on this, a rankine-cycle was modeled using the software EES, to be able to calculatethe total heat required in the power plant.

AbstractThe market?s demand to purchase more cost effective products is continuously increasing. The producers are forced to become more efficient and flexible with resources to produce high quality products at a low cost in order to maintain or increase market shares. With this in mind Isaberg Rapid AB is requesting a project to increase efficiency in the assembly cell of hammertackers. The company has found in Kaizen-events that there is a potential of efficiency improvements in the assembly group that has not been achieved.The objective with this paper is to identify the major factors that influence the efficiency in the assembly cell for hammertackers.

A piezoelectric injector was modeled, in this Master Thesis Project which was carried out at Scania CV AB in Södertälje, in GT-Fuel. GT-Fuel is simulation program from Gamma Technology.The simulation model for the piezo injector was divided into a hydro-mechanical system and an electrical system (Piezoelectric element). First the hydro-mechanic model was duplicated from Advance Continuous Simulation Language model (ACSL). The simulation results were then compared to the ACSL, to verify that the hydro-mechanical system was modeled correctly. The simulation results for the electrical model were also compared with a Simulink model.