An often encountered problem when implementing a mass flow regulator in a rolling mill is the one with measurement of speed. The most widely used solution is to fit a pulse counter to a wheel that is in contact with the strip. Common problems with this design are for instance scratch marks on the strip and problems with the flatness measuring system.  One way of circumventing the aforementioned problems would be a non-contact measuring system. The market of today only offers systems based on the Doppler principle.This report evaluates three different systems for non-contact speed measurement. Important areas in the evaluation have been the ability to operate under normal rolling conditions, integration in existing control system and how well the sensor can be fitted to the rolling mill.

An often encountered problem when implementing a mass flow regulator in a rolling mill is the one with measurement of speed. The most widely used solution is to fit a pulse counter to a wheel that is in contact with the strip. Common problems with this design are for instance scratch marks on the strip and problems with the flatness measuring system.  One way of circumventing the aforementioned problems would be a non-contact measuring system. The market of today only offers systems based on the Doppler principle.This report evaluates three different systems for non-contact speed measurement. Important areas in the evaluation have been the ability to operate under normal rolling conditions, integration in existing control system and how well the sensor can be fitted to the rolling mill.

This thesis is an attempt to shed light on how the authors of the Swedish Government Official Report, SoU 1999:83, speak about how the globalization affects democracy. The method used is critical discourse analysis and ideological analysis, with the main emphasis on the former. The results of the analysis are then interpreted with central parts of Jürgen Habermas? The theory of communicative action. One of the main conclusions is that an absolute majority of the authors, talk about how the globalization affects democracy in terms of the economic market and the European union.

The government regulations for energy use in buildings will be tightened in the future. At the same time the interest in environmental classifications and certifications of buildings is increasing. This has meant a new situation for solar energy. The designs of solar heating systems are often based on experience and/or rules of thumb, rather than calculations and simulations. This thesis examines whether simulation tools, in this case Polysun, are useful in this work.

Long transport of products is an environmental issue discussed to an increasing extent. The consumers are increasingly aware of how far our comestibles really have been transported. The increasing levels of environmental emissions are something that concerns people. The question is nevertheless delicate and many choose to ignore it. This is no longer an option.

An Interoperable Fare Management system for public transport has been a struggle for the actors in industry of public transport. A lot of effort has been put into creating a smart card solution that enables the travellers to use the same card for paying and holding the ticket regardless geographical position in Sweden. That project has failed, mostly due to a lack of taking non-technical actors and aspects into consideration during the project process. This thesis highlights the major actors and their responsibilities. The ARKTRANS framework is used as analytical tool to identify different roles. Throughout the thesis a sociotechnical perspective is used. The developed method in this thesis is suitable for mapping of actors and responsibilities in a network surrounding a complex technical system.

Vertical hydropower units has a rotating mass of up to 1000 tons. For the generator and turbine to work well the rotating system is required to be centered in relation to the surrounding structure. This is achieved by means of radial bearings. The dynamic characteristics of these bearings have a strong impact on the overall rotational dynamics of the total system and thus influence the vibrations in the unit. At Vattenfall Research & Development in Älvkarleby ongoing research is taking place on how the bearing parameters should be represented in the rotor dynamic calculations.

The Library of Uppsala University has decided to change their classification system from the Swedish SAB system to the American Dewey Decimal Classification. One of the main reasons for this decison was that Kungliga biblioteket also has made an exchange between these systems. Due to that, the national bibliography of Sweden classifies Swedish documents according to Dewey Decimal Classification and the SAB system is no longer maintained. A transition to Dewey Decimal Classification will enable Swedish librarians to import foreign catalouge posts and classification codes and will provide them with a common standard between their libraries and other libraries due to the use of the same international classification system. It is disputed whether the Dewey Decimal Classification is equally suitable for all subjects.

This thesis was made possible by the company Verendus system AB, which is the leading developer of dealership management systems in the caravan and camper market. The goal of the thesis was to create a statistics module for a new producer system envisioned by Verendus. The new system is aimed at manufacturers and importers of caravans and campers, with the goal of enabling its users to create more effective production lines. By providing statistical data to mentioned users they will be able to predict market trends and customize their production lines accordingly. Today such software does not exist which leads Verendus to think that its arrival would lead to a success on the market.Before the development and design of the producer system began, a new agile method had to be developed, MAM (Minimum Agile Method).

Denna rapport behandlar en prisjämförelse mellan fyra olika elsystem i fyra valda referensmiljöer. Uppdragsgivaren till detta projekt är företaget Arexor som har utvecklat en ellist som de ska släppa på marknaden under hösten och därför vill ha en prisbild på marknaden idag. De olika systemen är i huvuddel Thorsmans TEK-123, KB-systems DWP, Eubiqs PTS samt det traditionella sättet med kablar och VP-rör infällda i väggen. Även en presentation av projektets uppdragsgivare Arexor och deras ETS finns att läsa om. För att kunna utgå från en realistisk bakgrund är referensmiljöerna valda så att en standard kan sättas för utformningen.

Ett företag kan göra sina för- och efterkalkyler i MPS-systemet eller i ekonomisystemet. Hur den ekonomiska uppföljningen är fördelad mellan de olika systemen är helt upp till företaget med avseende på företagets olika behov och krav.Den centrala delen av detta examensarbete är de besöksintervjuer som genomförts på fyra utvalda företag. Dessa intervjuer ligger till grund för mitt resultat och analys. Utifrån det insamlade materialet har jag besvarat den frågeställning jag hade: Hur hantering med för- och efterkalkyler sköts samt hur ekonomisk uppföljning är fördelad mellan MPS-system och ekonomisystem.Det resultat och slutsatser som jag kommit fram till finns presenterat i denna rapport. Det visade sig att de undersökta företagen sköter arbetet med förkalkyler noggrant.

Arbetet är ett examensarbete i högskoleingenjörsutbildningen, inriktning datateknik, på Linnéuniversitet. Arcoma AB är ett företag i Växjö som utvecklar och tillverkar kompletta röntgensystem. Företaget har som mål att förbättra användarvänligheten av systemet med hjälp av en LED-display. De kan förbättra systemet genom att byta ut en enhet som styr röntgengeneratorn mot LED-displayen. Detta leder till att användaren får bättre kontroll och styrning av systemet, samtidigt som patienten behandlas.I rapporten beskrivs implementering av både hårdvara och mjukvara till displayen, samt den tekniska bakgrunden som till exempel HDMI och LED-tekniken.

The thesis presented in this report has been made on behalf of Scania and their basic frame design department with the subject to solve an implementation of a weight sensing system in the chassis. The system is supposed to be implemented in the seat springs, and the reason for this is that all the force will have to go through the weight sensing transducers. With all the force going through the transducers the weight sensing system will not be sensitive for the differences in tolerances from manufacturing. The transducers could be pre-calibrated to avoid a calibration of the whole vehicle after it?s completed from the manufacturing line.Weight sensing systems is today a reality in trucks with air springs.

This master thesis is made of two parts. The first part concerns the method and results ofdesigning a motion control system for a piece of research-equipment called BIRGIT. Theequipment is made to be used for research on eyemovements. In the second part, a computermodel of a part of the balance organ in the inner-ear is developed. The work has been done atthe Bernadotte laboratory at S:t Erik Eye Hospital.The equipment the control system is made for is a so-called rotationchair.

The forestry companies? operational planning process is these days dependent on reliable, efficient and user-friendly computer-based support systems. This study is an evaluation of Holmen Skog's current computer-based systems. The aim of this study is to: ? investigate the work pattern of the production managers when using the information system to plan the harvesting operation; ? investigate the efficiency and user friendliness of the information system with the different work patterns and to find the strengths, weaknesses and bottlenecks in the current system; ? find out if the type of object, the volume, the area of the harvesting object affects the time and work pattern; ? examine how this type of study is met by the employees and what factors that is critical to avoid feelings of intrusion. The conclusions of the study were: ? there is a large variation between the work patterns of the production managers and the time spend to perform the operational planning; ? the mainframe computer system used by Holmen Skog is clear, has short response times, is robust and conveys relevant information; ? the computer systems are however divided in many subsystems.