The purpose of this thesis is to investigate the possibilities for shore side electricity in the ports of Västerås and Köping. A technical solution to connect the vessels to the local grid is suggested and the investigation is also aiming at an understanding of how the environment is affected by the use of shore side electricity. Furthermore, the costs of shore side electricity are considered.The maximum power demand of a vessel visiting the ports today is relatively small, but the ships visiting the ports in the future might have a larger power demand. The suggested dimension for the system is 5 MW and the result shows that the shore side electricity requires the power distribution to the ports to be expanded. The most useful solution in the ports is to connect the ships with 12 kV from a connection box in a pit at the quay.The investigation of the costs shows that it is cheaper for the ships to use electricity compared to the marine fuel.

Att sövas inför en operation innebär att lämna över kontrollen av sina livsfunktioner och är en situation många patienter känner oro inför. För att kunna utveckla anestesisjuksköterskans preoperativa omhändertagande är kunskap om patienters upplevelser av omhändertagandet nödvändigt. Dessa upplevelser kommer att studeras med utgångspunkt i en teoretisk begreppsmodell om personcentrerad vård.Syfte: Att beskriva patienters upplevelse av det preoperativa omhändertagandet inför anestesi.Metod: Kvalitativa semi-strukturerade intervjuer kommer att genomföras med ett tiotal personer som i slutenvården genomgått en operation i generell anestesi. Intervjuerna kommer att analyseras med kvalitativ innehållsanalys. För att testa metod och forskningsplan genomfördes en pilotstudie där två forskningspersoner som nyligen genomgått en operation i generell anestesi intervjuades.

For several years Uppsala University together with several companies has been involved in a WISENET project aimed at improving railway transport security. By placing a sensor system near the wheels of each wagon, the temperature of the bearings can be measured and transmitted to a collector placed centrally on the wagon. This in turn transmits the collected data to RFID receivers placed intermittently along the railway.As the signals are transmitted wirelessly, problems may occur as the antennas get dirty or coated with ice and snow. To determine the effects of these coatings, several tests were performed examining the reflection coefficient S11, the impedance Z11 and the efficiency eta of an antenna, and how they varied when various coatings were placed over the antenna. Examined coatings were ice, snow and water to determine the effects of weather, and various metal-based coatings: powdered iron both pure and partially oxidized, and iron ore granules.

Bakgrund: ?rligen opereras cirka 400 000 patienter inom slutenv?rden i Sverige. Det finns forskning som visar upplevelsen av att v?nta p? en elektiv operation, dock saknas det forskning om hur patienterna upplever v?ntan p? en akut bukoperation. Specialistsjuksk?terskan beh?ver kunskap om och f?rst?else f?r hur patienterna upplever sin v?ntan p? en akut bukoperation f?r att kunna bem?ta patienten och ge trygghet.

To make wave power more competitive on the market Uppsala University leads projects that examine how to accomplish better efficiency in the production. One of these projects is described in this report and examines whether it is possible to make the production of dovetails more efficient by using an industry robot of type ABB IRB6000 S3 M91. This project is using an already presented working method, from a previous project, which involves that the robot picks up the dovetail and moves against fixed cutting machines where the dovetail will be drilled, threaded and milled. Drilling and threading are the sub operations that will be examined in this project where experiments are made with the presented working method and with equipment from Uppsala University.Experiments show whether it is possible to drill the holes in the dovetail within specifications by using the specific robot and the presented working method. The threading operation is examined theoretically if it is possible to accomplish by using the same working method.

In this study a case study was conducted at the Transport Agency. The government agency is seeking better alternatives to its current ways of keeping track of important dates stated in legal documents. The agency wants to explore the possibility for an IT-solution for keeping track on those dates. In the case study change analysis was conducted on the vehicle type approval process. Qualitative interviews were conducted with a section manager, vehicle type and component approvers, and with a system administrator and a system manager at the Transport Agency in Borlänge.

Jämtkraft AB has recently modernized its hydropower station at Hissmofors by replacing four older worn out units with two new units. The generators uses a concept with sliding stator feet to deal with the thermal movements that occur in the stator during operation when the unit is operating intermittently. At other sites, this method revealed shortcomings in the reliability. This has made Jämtkraft AB feel uncertainty about its function and therefore want to investigate it during an early stage. The generators have a built-in monitoring system for the sliding stator feet and by using data from there the function of the sliding stator feet has been investigated. The study focused on how the different stator feet move relative to each other and how the eccentricity and deviation from roundness changed during operation. The results show that there are several indications that the function of the sliding stator feet is not satisfactory.

A new build in the Swedish nuclear power system would entail increased re-quirements for the proposed repository, which is adapted after the reactors of today. With a fast reactor, capable of burning nuclear waste, operating in parallel with the light water reactors, the increased requirements on the repository could be reduced.In this thesis, simulations of a light water reactor and a fast reactor have been performed by using the Monte Carlo code Serpent to investigate the changes in the fuel inventory. The light water reactor in the study is a boiling water reactor and the fast reactor of the type sodium-cooled fast reactor and they have been used for three different operation scenarios.By studying the fuel composition and the results from the simulations of the three scenarios conclusions can be drawn. Conclusions regarding the change of the fuel inventory and decay heat in Clab as well as the interim storage facility and in the repository. Depending on the operation alternative the changes dif-fered significantly and especially regarding the mass of burned actinides for different fuels in the fast reactor.The lowest increase of fuel assemblies was meet when using 50 years old fuel with 20MWd/kg U burnout and 2,0 % enrichment for start up of the fast reactor and 30 years old fuel assemblies with 50MWd/kg U burnout and 4,7 % enrichment for the further operation of the reactor.The increase of the number of fuel assemblies was 3174, which is equivalent to 641tons of heavy metal.

The aim of this report is to analyse the use of the capacity at the CNC (computer numerical control) cutters and show how the level of set up time for these cutters at Stålöv AB. This assignment is concrete whereas there are no subjective questions to this matter and there are only cold figures presented.Production economy is getting more important as the competition hardens and there are several different ways to increase productivity and efficiency in a company. In order to increase productivity and efficiency work studies are used to, through an analysis, find developments in methods that result in improved work methods and to establish the time that are used. Increased production of different parts and customer driven production in combination with increased demands on rationalisation of capital have led to an enlarged interest for shorter set up times in the production.To point out the use of capacity and the set up time of the cutters at Stålöv AB we used frequency studies. Frequency studies are work measure methods based on random observations on predetermined events to calculate the relative occurrence of these events.

Forskning beskriver kraftig övervikt relaterat till fetma som ett svårbehandlat tillstånd där gastric bypass operation kan vara ett alternativ till viktminskning. Studier visar på att nyttan övervinner riskerna då dödligheten minskar i den grupp som genomgår operationen. Dock är övervikt relaterat till vissa risker inom anestesin som sjuksköterskan ställs inför. Problem med att etablera en fri luftväg samt intubationssvårigheter är två huvudsakliga problem anestesisjuksköterskan ställs inför. Därför är det viktigt att ligga steget före som anestesisjuksköterska och vara förberedd på eventuella komplikationer.

In this study we have investigated how local journalists in Kalmar think when they choose their sources to interview. We have also studied several factors that can affect their choices of sources.We have interviewed eight news journalists from the two largest local news papers Barometern and Östran in Kalmar.The journalists were asked about the sources they often use as interview objects. They were supposed to tell about how they think when choosing sources and define which sources they commonly use. There are different factors that can affect the choices and we have narrowed them down to ethics, source critics, credibility, stress, hard production conditions, public and their own interest and if they consider themselves to be individualistic or controlled by the news desks. Furthermore the journalists were asked to characterize what changes they would make when choosing sources in a perfect world.All of the journalists had not reflected prominently on the subject of sources before our research.

In this report an MCNP (Monte Carlo N-Particle) model is described for the reactor vessel at Ringhals 2. The model is validated against the specific activity in neutron dosimeters, extracted in 1977, 1984 and 1994. The validation showed that the calculations of the model are within the requirements of a maximum of 20 percent uncertainty for every neutron dosimeter except one, extracted after the first cycle. The uncertainty of this cycle was mostly due to the operation data rather than to the MCNP model.The model has been used to investigate various questions concerning radiation damage. The reliability of the traditional measure of radiation damage, fast neutron flux (En > 1MeV) has been evaluated.  This has been done by taking the ratio for this and another measure of radiation damage, DPA (Displacement Per Atom), for various positions and layers.

Syftet med denna litteraturstudie var att undersöka vilka emotionella omvårdnadsbehov patienterna hade innan operation och hur sjuksköterskan på bästa sätt kunde lindra dem. Metoden var en litteraturstudie baserad på vetenskapliga artiklar med dels en kvalitativ ansats (n= 5) och dels en kvantitativ (n= 10). Artikelsökningarna gjordes via sökmotorn ELIN och databaserna CINAHL och PubMED. Artiklarna var etiskt godkända samt publicerade mellan 2000-2010 och skrivna på engelska. De granskades med hjälp av granskningsmallar.

I was assigned to the thesis as part of a project GMA AB (Ground Machinery Applications AB) is running. The project aims to develop a new method for injection of drilled holes in rock walls. Currently, the injections usually involve cement but the basic idea of the project is to replace cement with a supplement called Silica sol.Silica sol is known as a gelling liquid. The gel time is controlled by a mixing of saline. Depending on the amount saline that gets mixed in, the gel time varies.

Höft- och knäprotesoperationer är idag en vanlig operation vid artros i höft- och knäled. Trotsminutiösa infektionsförebyggande förberedelser inför operationen drabbas ändå en delpatienter av postoperativa infektioner. Vid ortopedisk proteskirurgi är postoperativainfektioner ett direkt hot mot den nya inopererade leden och kan leda till långabehandlingstider som påverkar patientens livskvalitet under lång tid.Syftet med studien var att utforska patienters möjlighet till delaktighet i tidig upptäckt avpostoperativ infektion utifrån given information vid operation för höft- eller knäprotes.Semi-strukturerade intervjuer genomfördes med tio patienter med diagnostiserad postoperativinfektion efter höft- eller knäprotesoperation. Transkriberade intervjuer analyserades medinnehållsanalys. Journaler granskades för att beskriva patientens tidigare sjukdomar.Resultatet visade att första tecknen på infektion kan beskrivas med temat: Vad är normalt ochvad är inte normalt.