SUMMARYInventory of raw materials holds an important role in companies within the manufacturingsector. The inventory works as a buffer that secure the supply of materials to the productionunit. The aim of the inventory is to ensure that the company is able to meet the customers?demands despite fluctuations and variations in the material flow. The size of the warehouseand the layout are physical limitations for the quantity of articles that can be stored.

Children's need of a good environment of playing outdoor at schoolyards is, both from a perspective of commonly public's health and from the children themselves, indisputable. Children who have a good and varying playground develop physically, psychologically and socially. As an instrument of pedagogic a playground also is valuable for example in teaching the round, periodical successions and understanding of democratic processes. The conception playground means here in my work the environment outdoor for children at schools up to about twelve years old. What is a good playground then? How is it possible for a landscape architect to contribute improvements? The purpose of my work has been to enlarge my knowledge about playgrounds, understand more of the profession as a landscape architect and apply a perspective of children in the planning. To sum up, the shaping of playgrounds has great importance for the activities of the children and if the teachers make use of it, the teaching. A good playground gives the delight, the excitement and the curiosity free spaces and stimulates new challenges.

This study evaluates the retention of nitrogen and phosphorus in four newly constructed wetlands in the municipality of Falkenberg, Sweden. The four wetlands have been selected because they have been specifically constructed with the aim to reduce nitrogen and phosphorus in farming areas. The process of selecting the specific wetlands has been done in collaboration with the county administration in Halland. Through field studies in collaboration with the landowners where the wetlands are sited, the areas that provide the wetlands with water were determined. The size of these drainage areas were determined in a GIS computer program. The type of land use within the drainage areas was also determined.

The aim of this study is to investigate English teachers? communication when teaching English in grade three in Swedish schools. The investigation seeks to find out what language is, and why it is, dominant and how the proportions in the teachers? uses of English and Swedish in time are distributed. The study also describes what attitudes teachers have to the English language and if, if so how, two categories of strategies, namely body language and code switching are used.The study was performed in two steps with different methods for collection of qualitative empirical data.

Studien har genom intervjuer i fokusgrupper undersökt vad elever i montessoriklass erfar som lustfyllt i sin lärmiljö.  Elevernas svar har satts i relation till den forskning som finns kring motivation och framgångsfaktorer för lärande samt till montessoripedagogiken.De teorier som studien utgår ifrån är olika motivationsteorier, teorier relaterade till motivation samt montessoripedagogik. Även framgångsfaktorer för lärande beskrivs. Tillvägagångssättet i analysen av fokusgruppsintervjuerna har inspirerats av fenomenografisk metodansats. De två forskningsfrågor som studien ger svar på är vad elever på mellanstadiet och högstadiet, i de undersökta montessoriklasserna, framför som orsaker till att de känner nyfikenhet att lära sig mer i skolan, samt vilka av dessa faktorer som är kopplade till montessoripedagogikens principer, och om de går att överföra till all undervisning. Resultatet av studien visar att eleverna pekar ut läraren som viktig för huruvida de ska känna nyfikenhet och lust i lärandet.

This report is a thesis work for a B.Sc. in Forestry exam at the School for Forest Engineers, SLU. The work was an assignment from Södra Skogsägarna and the aim of the work was to investigate the economical and biological output after mechanical planting with Eco-Planter compared with traditional manual planting. Eco-Planter is a tool for mechanized planting, fixed at the end of the boom on a conventional harvester. The study confirms that manual planting is less expensive under normal conditions. However, the differences between mechanized and manual planting are not that big and with technical development and/or increased labor costs together with an improved work organization the system with Eco-Planter could be competitive. The biological output, e.g. planting result and survival rate, seems to be quite good.

Modern sawmills are using the raw-material and the production-capacity more efficiently today, due to rising raw-material prices and higher production costs. Log sweepness has a negative effect on the sawn yield, for sawmills with straight-sawing. It is desirable that these logs could be sorted based on more criteria, if it increases value-yield and consequently the utilization of raw-material. Bow-heights over 1 cm have a negative effect on sawn yield, since the surface of the mantle cuts down in the sawn pattern. Some of these small bow-heights reduce the logs yield of value which affects the production planning negatively. Nearly half of all the Swedish logs have a bow-height over 1 cm.

Den här uppsatsen är ett försök att ringa in och samla ihop tankar kring vad det är att vara närvarande på scen samt hur man kan lära ut det. Arbetet innehåller citat och referat från intervjuer med sju personer: En skådespelare, en koreograf, en jazzsaxofonist och improvisatör, två sångerskor och sångpedagoger, en sångerska och låtskrivare samt en klassisk altviolininst. Här finns också citat och referat ur relevant litteratur. Arbetet ska ses som en ingång till ämnet snarare än en djupdykning..

Phosphorus is the single most potent contributor to eutrophication of freshwater and has also been shown to contribute to the toxic algae blooms in the Baltic sea. The dynamics and paths of losses of phosphorus from arable lands are not fully understood. It is known that phosphorus can be lost directly from plant material to water. In studies where plant material has been subjected to several freeze-thaw cycles, large amounts of phosphorus have been lost. Most studies have been conducted under field conditions, with many factors effecting the measured losses of phosphorus, such as weather and type of soil. This study was performed in a controlled environment without the presence of soil. Instead of soil, small glass beads were mixed with the plant materials in vessels, to make possible homogeneous leaching with water through the mixture of glass beads and plant materials. In this study, clover, ryegrass and dry straw were cut to pieces, approximately 2 cm long.

SUMMARYInventory of raw materials holds an important role in companies within the manufacturingsector. The inventory works as a buffer that secure the supply of materials to the productionunit. The aim of the inventory is to ensure that the company is able to meet the customers?demands despite fluctuations and variations in the material flow. The size of the warehouseand the layout are physical limitations for the quantity of articles that can be stored.

High-precision cutting in metal is very complicated, a lot of parameters affect the result: what geometries to be manufactured, surface roughness and tolerances to be achieved, batch size etcetera. When pull-broaching internal parts this might be even more important, than in any other cutting operation. Everything is machined in one single stroke and the general technology is built in to the tool, therefore big investments must be made to change the process. Milling for an example: one piece at a time is machined away, and a lot of parameters can be changed easily.It is very high pressure on the cutting-edge when the broach is cutting. To achieve the specified product and to avoid unnecessary toolwear it is essential to use the right cuttingfluid and the right cuttingspeed for an example.

This thesis has been a part of Forsmarks Kraftgrupp AB's evaluation of a turbulencemodel used in simulation of turbulent flow called PRNS (Partially Resolved NumericalSimulation). This model has promising properties and may be of use in savingcomputational resources. The purpose of this thesis was to analyze this model andcompare it with industrially applied models such as k-omega SST and LES (Large EddySimulations).PRNS works as a hybrid of the k-omega SST and DNS (Direct Numerical Simulation)where a constant, RCP (Resolution Control Parameter) with a value between 0 and 1are selected. This constant is then used in the calculations and determines thebehavior of the simulation. When RCP is set to zero the equation are the same as fora DNS simulation and when RCP is set to one the equations for k-omega SST issolved.

SUMMARYInventory of raw materials holds an important role in companies within the manufacturingsector. The inventory works as a buffer that secure the supply of materials to the productionunit. The aim of the inventory is to ensure that the company is able to meet the customers?demands despite fluctuations and variations in the material flow. The size of the warehouseand the layout are physical limitations for the quantity of articles that can be stored.

SUMMARYInventory of raw materials holds an important role in companies within the manufacturingsector. The inventory works as a buffer that secure the supply of materials to the productionunit. The aim of the inventory is to ensure that the company is able to meet the customers?demands despite fluctuations and variations in the material flow. The size of the warehouseand the layout are physical limitations for the quantity of articles that can be stored.

The primary function of a mixer is to keep a fluid in constant motion. All mixing applicationsrequire varying degrees of small-scale turbulence and bulk flow. The performance of asubmersible mixer is measured by the thrust that it produces, while the strength of the bulkflow is dependent on the total amount of installed thrust.In a mixer, the fluid quickly flows past the propeller, and as a result, the current is mainlyaxial. The fluid will also obtain a rotating velocity, or a swirl, though this is significantly lessthan that of the propeller. During the process, the total amount of energy increases in the formof static pressure and kinetic energy.