The first of May 2005 changes were made in the Annual Accounts Act. The 2006 Annual Report of companies with more than ten employees or assets over 24 million SEK must include environmental information in the directors' report if it affects the company's development, result or position. A survey made by KPMG 2007 investigating the environmental information of companies listed on Large Cap Segment of the OMX Stockholm exchange showed that only a third of the companies, included in the survey, complied with the new law requirements. I have examined how the environmental information in the directors' report is formulated and why the information is formulated in that fashion. I have examined seven companies listed on the Large Cap Segment of the OMX Stockholm exchange. Four companies from the materials sector and three banks from the financials sector were included in the survey.

This report describes the development of an application in collaboration with Designingenjörerna AB. The company has worked for a long time with a community platform and they required an application where users can create their own unique profile representations, called Avatar Creator. An Avatar Creator is computer based application, which makes it possible to create a virtual character. The problem area behind this is that, large websites require a lot of administrative work when people upload profile pictures on different community pages. They can contain abusive material or pictures of other people rather than those who created the profile.The questions in this report are, how can an Avatar Creator help user to get a unique profile of himself? What are the advantages and disadvantages of an Avatar Creator? How to create a user-friendly application?To understand how an Avatar Creator works and get ideas to create an application, exiting Avatar Creators were reviewed on the Web.Collaborative work with Designingenjörerna AB was done to pin down the requirements for the Avatar creator application.

As of today, securitization is an established product on the capital market. The first transaction was made in the US in the 1970s. Since then the product has been developed and today there are several different structures of the product. Internationally securitization has been used for two reasons. Originally securitization was used to gain capital relief, but since capital requirements such as Basel II were implemented, the usage of securitization changed to more of a funding source.

Romanization as a method in the bibliographic environment makes retrieval difficult in many aspects. The object of this thesis is to illustrate the importance and the possibility to include non-Roman script in the records of the library catalogue. The questions at issue are about the consequences of romanization, the technical requirements for implementing non-Roman script, and bibliographical resources that have been developed during the last 20 years. The thesis is based on a literature study and correspondence with people who are familiar with the subject. The thesis points out that Romanization causes information to be distorted in various ways and is inconsistent with the requirements of exactitude in bibliographic control.

Electrolux Laundry Systems is the world leader in manufacturing professional laundry equipment.The machines are used in the hotel sector, elderly care, in multifamily houses, laundry bars, and incommercial and institutional laundries.If there is oil or grease left in the clothes after washing may the heat from the dryer cause a chemicalreaction. This reaction may, under certain circumstances cause a fire inside the drum. Competitors toElectrolux has developed its own systems that extinguishes fire inside a tumble dryer and customershave expressed desire to purchase a fire-extinguishing system. Therefore, the project team receivedthe task by Electrolux to develop a fire-extinguishing system that extinguishes a fire in a tumbledryer.The purpose of the project has been to develop a system that both detects and responds to fire in anindustrial tumble dryer to meet the competitors and to satisfy customers' requirements.The goal was to develop a fire-extinguishing system for Electrolux Laundry Systems and develop afully functioning prototype.The project began with information searches on a variety of methods to both detect and extinguish afire. Subsequently, a number of different methods were used to develop a final solution and make aprototype.The result of the project is a fire-extinguishing system that extinguishes a fire inside a dryer.

The purpose of this study is to examine the teachings of rhetoric?s in schools, more specifically within the Swedish subject; furthermore it examines how Swedish teachers work with rhetoric in the Swedish subject on a practical basis. The study also highlights teachers' approaches to the curriculum for high school. The method I have used to conduct this study, have been to use interviews and inductive ethnography. The teachers whom have been interviewed in my study have similar understandings of what oral presentations actually are, but their idea of what the term rhetoric stands for however differs. Teachers have received similar training in rhetoric; however, they have different experiences within it.

Change is a natural state for both people and institutions, but as the surrounding world moves faster it becomes important to quickly be able to adjust to new conditions. Customers? force of negotiation increases as the global competition grows. One factor that becomes more vital to customers is the amount of quality standard a company can offer them. Several factors are essential if a work of change will be considered a successful investment, where the change can be perceived in both a positive and negative way for an employee.

This thesis was conducted at AB Fredr Wagner in Ösmo in Nynäshamn, Sweden.AB Fredr Wagner provides solutions for the graphic industry and has been asked by acustomer to develop a product that can simplify handling of EUR-pallets, namely amechanical arrangement, further called pallet exchanger that can switch from anempty pallet to a fully loaded one using only hand force.The goal with the thesis was to create design documents for a pallet exchanger, andalso from those documents to manufacture a prototype for testing and evaluation.A field trip was made to the customer, IKAB mailing in Huddinge, where the palletexchanger is thought to be placed. The purpose of this field trip was to get an insightinto the current work condition and need of change, as well as to gather informationregarding the requirements when it comes to size and robustness of the palletexchanger. Existing equipment on the market that can perform similar tasks werestudied in order to find an optimal solution for the actual pallet exchanger.After the field trip and gathering of information the concept generating phase began.The method used for generating concepts was brainstorming. To decide on whichconcept to use, a concept selection matrix was created. The selection criteriaincluded in the matrix came from the requirements for the pallet exchanger.

To challenge the competition within the construction business there are requirements ineffectiveness and use of operating computer based programs and work-methods. Thecomputer based programs are continuously improved and can at some point be the start of anew work-method. The work-method of tomorrow can be Building Information Modeling(BIM).This Master of Science Thesis gives an understanding in what BIM is and what therequirements for Sweco Theorells are in a future BIM-use as a consulting-firm. Theunderstanding is presented through a study of theory within the subject. The way of thinkingand acting among different disciplines and individuals within the building process isexplained through an interview study.The term BIM is regularly used.

 The purpose with my study was primarily to illuminate the students' expectations on gained knowledge during their studies at the upper secondary school Hotel- and Restaurant program, and to what extent these expectations were fulfilled. Secondarily, the purpose was to compare the students' expected and perceived knowledge with the program goals set by the Swedish government and the knowledge requirements expressed in a pilot study made by the Education council of the Hotel and restaurant business (UHR, 2007).I chose a quantative approach and I used an anonymous group enquiry among students at the Hotel- and Restaurant program at two different upper secondary schools to carry out my study.Tendencies in the result suggested that the students at the Hotel- and Restaurant program expected high knowledge level within the competence areas of Guest reception and communication, Cleaning and hygiene, Cooking of cold and hot dishes and Waiting. The expectations were not big within the areas Computers and Internet and Business economics and management.Fulfillment of expected knowledge tended to be high within the areas where the expectations were big. It might therefore be a good investment for schools to work on the student expectations to increase motivation within the low expectation areas.A confrontation of the tendencies in the result with the program goals and the competence requirements expressed in the UHR study, suggested that the upper secondary Hotel- and Restaurant education might focus some more the areas of Guest reception and communication, Beverages and Organization of banquets. Business economics and management should be given much more weight..

When constructing a building, a number of aspects must be harmonized in order for it to fulfill requirements ? a building must fulfill requirements such a load-bearing, conservation of energy and a good indoor environment by means of, among other things, moisture proofing .Moisture problems in buildings can affect health negatively. As we are increasingly staying in indoors, demands on a good indoor environment are higher.This work starts with examining moisture problems in slab-on-ground solutions, and then links the various scenarios to moisture problems in a concrete slab of a real building. The building with moisture problems is located in Årby by in Borlänge and moisture damage was found in the slab at an apartment adjoining wall.By reviewing literature written within the field of moisture problem, making hand calculations and modeling in the program Comsol Multiphysics, judgments are made to find explanations as to why the rise of moisture occurred in the building in Årby by.Generally, the following guidelines may be used to reduce the risk of moisture problems in slab-on-ground constructions:Drying of construction moisture before laying the floor material.Using draining layer beneath the slab, to prevent capillary suction.Using insulation under the slab, partly for comfort and to establish the temperature difference between the ground and the concrete slab.Avoid direct contact between the wood and concrete, due to degradation and fouling smells that normally occurs.If necessary, use additional vapor barrier.In addition to the above, there are various methods for moisture-proof and moisture-monitoring by design or by the method ByggaF suited for the entire construction process various events..

The purpose of this study was to examine vitamin A and E in equine nutrition and especially in relation to forages. A literature review was conducted to examine factors that influence the level of vitamins present in forage, the vitamin A and E requirement of horses, and the absorption of vitamin A and E in horses. The influence of DM level on alpha-tocopherol and beta-carotene content in ensiled forage was investigated in a controlled ensiling study using baled silage and haylage. The results from the ensiling study were combined with data of vitamin A and E concentrations collected from literature. Calculations were done to theoretically establish how well the vitamin content in ensiled forage can cover the maintenance requirements of vitamin A and E in horses.

In our study the purpose was to examine the influence of Continuing Professional Education on small and medium sized auditing- and accounting practices. The study also aims to analyze possible similarities and differences in how small and medium sized auditing and accounting practices are affected of the requirements regarding Continuing Professional Education. In order to fulfill our purpose in the study we conducted interviews with auditors and accounting consultants on small and medium sized auditing- and accounting practices. Totally did we conduct seven interviews with four auditors and three accounting consultants. The majority of auditors and accounting consultants we interviewed are satisfied with the current requirements on Continuing Professional Education and think they contribute to the increase of quality and status of the work tasks performed by auditors and accounting consultants.

In the last decades, high speed cutting has become an attractive technology in the wood industry. The possibility of reducing global costs in addiction with an increase in productivity, were the main reasons for the enlargement of the use of this technology. As usual, these advantages are accompanied by disadvantages that should be carefully analyzed. If on the one hand cutting forces are reduced with increasing cutting speeds, on the other hand, the centrifugal forces affecting the tool are higher. Exposed to such high loads, there is a considerable risk of tool failure that embeds hazards for both machine and workers.

A protection helmet for young people (3-7 years) in winter environment has been developed in this thesis. The result is a concept proposal for development at STIGA Sports AB in Eskilstuna. This thesis work has been performed during 20 weeks, for a Master of Science in Product and Process development at Mälardalen University Eskilstuna Sweden in September 2009 to January 2010. The helmet is shown as a CAD model with detailed solutions to the outer shell, interior and adjustability (in sizes 50-56 cm) which are the three focused areas in the development. Also a physical model in scale 1:1 has been developed and is shown in this thesis work.To achieve the best result possible the process started with an analysis of the market and the product.