Modeling and simulation is growing ever more important in the development of new products. This thesis describes the use of Hopsan for hydraulic modeling and its use in conjunction with Simulink with the intent of using the model in a hardware-in-the-loop setup. A sensor layer has been created in Simulink to emulate all the internal sensors in a modern forklift. The details of using legacy C-code instead of a hardware MCU for a fully simulated environment, software-in-the-loop has been outlined. There are two major routes one can follow implementing software-in-the-loop, exporting the C-functions to CAPL via a export layer or creating an s-function in Simulink.

The Swedish cooperative Lantmännen Ekonomiska Förening has initiated a project labelled "Operation Blåljus" that includes an extensive program for closing down elevators. The number of elevators will be reduced from 92 to approximately 15 after harvest of 2007. The objective of Blåljus is to increase the price of grain with 10 öre/kg. A project has been initiated at the Lantmännen Grain division where the purpose is to provide the farmers with support in their decisions and practical advice how they can load a 35 ton grain truck on 30 minutes. The result from the project will serve as a support system to the farmer in his ambition to achieve cost efficient systems to load a truck with grain on the farm.

The Transport division is responsible for the internal transports on Sandvik MaterialTechnology AB. At the moment there is no clear picture of how the straddle carriers aremoving at the division Primary Products and if it is working in a satisfying way. It isimportant to see the whole picture of the transportation flow so improvements can be made.The purpose of this essay is to survey and analyse the truck flow in a Lean Productionperspective. The essay is delimited to only include straddle carriers transportation ways in thePrimary Products division. To survey the truck flow we have used a method called Walkthrough.This means that we have walked thorough the whole production flow andinterviewed some of the employed on the way to get the necessary information.

Our greatest interest within crop farming is to grow sugarbeets, that?s why we want to write about something new in this sector. We heard that a new concept had come to Sweden so we wanted to find out everything about this machine. This new technique was a self-propelled cleaning loader for sugarbeets. This machine is supposed to replace a loader and a cleaning machine when the sugarbeets is going to be loaded, cleaned and delivered to the sugerbeet factory. The cleaning loader picks up the sugarbeets with rollers from the pile, which is placed close to the road.

The task was to deliver a solution that could be implemented in today?s production of the FH truck. To make the project successful it was most important that the end result had a high maturity level. For that reason an analysis of ergonomic, laws and regulations, and possible materials where conducted. To show that this project is profitable and can be realized a ruff cost estimated of material and tools is added to the research.

Generally, the economic health of Swedish roundwood truck transport companies has not been good. Profitability is important for maintaining the stability in the transport business, which is a condition for long-term transport planning in the forestry sector. The scope of this study was to identify probable factors influencing the profitability of roundwood truck transport companies and quantify the influence of these factors on economic results. The study was carried out at a major roundwood truck transport organisation in mid-Sweden and was implemented in four steps. In the first step economic results from the haulage contractors were collected and a random sample was taken from accounted net margin for the account year 2005/2006. In the second step hauliers were interviewed to identify probable success factors. At the third step data for identified factors were gathered through a questionnaire.

The project has been done in cooperation with Schenker Åkeri AB in Sweden, Halmstad. Theproject is based on an inspection made by Arbetsmiljöverket, where they found minorshortcomings with distribution of goods for the employees. The project is an investigation ofthe drivers? working environment.Schenker Logistics is one of the world's leading providers of integrated logistics services.Schenker Åkeri AB is a subsidiary to Schenker Logistics and transports 2.4 million tons ofgoods yearly.The project started with a background study to evaluate drivers working environment. Wehave studied goods receptions, the working environment, strain injury and injury mechanisms.Methods used was observations, tests, questionnaire surveys and ergonomic andbiomechanical calculations.One result of the study is a working model, which gives recommendations for the maximumweight a driver should push and pull.

Detta examensarbete har genomförts på Aven Rabbalshede AB i syfte att kartlägga företagets dåvarande situation i dess interna logistikflöde, för att sedan lägga fram förbättringsförslag som kan implementeras för att förbättra detta flöde. Målet var att reducera trucktrafiken i fabriken med minst tio procent.Aven Rabbalshede AB är ett tillverkningsföretag av lastpallar, träemballage, transportstöd och lådor. Företaget är en del av Avenkoncernen som är en av Skandinaviens ledande tillverkare av lastpallar och träemballage. Aven Rabbalshede AB är den största enheten inom koncernen med cirka 55 anställda och en produktion på cirka 1,3 miljoner lastpallar per år. Företaget hade en bristande struktur och systematik över truckflödet och materialhanteringen vilket har inneburit stora och många mellanlager samt andra svårigheter.Examensarbetet innebar att först och främst kartlägga vad respektive truck gjorde under en arbetsdag för att kunna analysera hur dåvarande situation såg ut.

Information about vibration injuries as a preventive measure is beneficial to society as well as the individual. As early as after a few years work with machines that vibrate can cause young sensitive persons to develop vibration injuries.An evaluation has been done on a web page with focus on information about work related vibration injuries. As a part of the evaluation a user observation and interview study was performed with workers who worked in different occupations. The workers all used machine that vibrate as part of the work. A total of eleven workers participated in the study.

The issue about how Scania shall perform HVAC tests in the climatic wind tunnel CD7, which Scania is about to complete by year 2013, has resulted in four test methods for truck HVAC and also a test method structure. The test methods have been chosen to focus on sun, snow and rain simulations. These are adapted and developed according to what should be tested and to what can be tested in CD7, which has been the object. With CD7 different climates can be simulated in a controlled environment for complete truck level, from desert with high sun load to arctic cold and snow.The test methods represents a basis to start from, for designers and test engineers which make the testing more repetitive as well as time eventually can be saved. Before the test methods can be applied they must be verified as they are based on theoretical and empirical assumptions.

Thesis completed by Johan Arvidsson, Alex Rasooli and Pontus Winroth, students at master program Product development and Design at the School of Engineering in Jönköping Sweden. The project comprises 30 ECTS credits and was carried out during the semester in the autumn of 2007.It was carried out in cooperation with Eksjöverken AB, subcontractor within the truck industry with special knowledge within the area of complicated machinery construction work. Job initiators at Eksjöverken were Mats Svanberg and Kjell Nygard. Dag Holmgren was acting as a tutor from the university. The task was to develop tools for trucks, primary toolboxes but in case of time also under run protection.

The purpose of the present study was to examine effects of driver, vehicle, and environment characteristics on Collision Warning System (CWS) design. One hypothesis was made that the capability of collision avoidance would not be same among a driver, vehicle, and environment group with different characteristics. Accident analysis and quantitative analysis was used to examine this hypothesis in terms of ?risk? and ?safety margin? respectively. Rear-end collision had a stronger focus in the present study.

Construction and maintenance of forest truck roads are a necessary element of industrial forestry. Payment for contracting services in this context can be done according to a number of payment models. This study will focus on the methods and consequences associated with a change of Holmen Skog?s payment model from per hour to per metric ton for ballast hauling. The aim of this study is to improve the economic efficiency of Holmen Skog?s ballast hauling in construction and maintenance of forest truck roads. This is done by formulating and evaluating a proposal for a payment model based on crowns per ton.

The low bearing capacity of roads during the spring thaw and periods in the autumn leads every year to increases costs for Holmen Skog. To reduce costs and increase accessibility Holmen Skog decided to install and test a CTI-system. Central tire inflation (CTI) is a system that makes it possible to monitor and vary a vehicle?s tire inflation pressures from the cabin, while the vehicle is in motion. When tire pressures are reduced, the area of the contact surface between the tire and the road increases, thus reducing the ground pressure. The purpose of this study was to evaluate the CTI-equipped vehicle and analyze if the CTI technology is economical defensible during the thaw 2005.

Problem formulation? Are there any factors affecting the choice of marketing strategy?? What is it that determines the degree for the company to use a standardized or a adapt marketing strategy?? How profitable is Scania's marketing strategy in each country?Objective: The overall aim of this study is based on local adaptation and global standardization to compare the degree to which the company Scania chooses to adapt or standardize its marketing to the South American and Asian markets.We also aim to compare and describe any factors that affect the countries' differences in marketing strategies and to evaluate and measure the profitability of marketing strategies in each market.Methodology: The study is limited to Scania's marketing in the truck market in Argentina, Brazil, Malaysia and Singapore from 2006 to 2010. In order to answer the study's problem formulation and purpose we have chosen to combine a qualitative and quantitative approach. Four interviews were conducted with marketing executives from Argentina, Brazil, Malaysia / Singapore and Sweden. We have also chosen to examine Scania's annual report and include figures on the market shares of Scania in the respective countries and the number of sold Scania truck which is then compared against the number of registered vehicles by country.