A product and design development of a household device which shall dry food waste has beencarried out in collaboration with Smedlund Miljösystem AB.This project has been implemented through several brainstorms and a questionnaire study.A great insight of how it is to work in a project in real work life has this project been givenme. This is a slightly less straight road to a conclusion than in the academic world that I amused to..

This study is made on assignment by the local board of forestry in Skåne, Blekinge and Halland. The change of the forest law 1994 brought a new type of management plan. A more active planning was introduced in order to equate the environment goal with the production goal. The purpose with this study is to give a better picture of how planning for nature conservation in production forest is made and to develop support for selection of silviculture methods for stands with combined goals. With combined goals means production forestry with a reinforced consideration to both nature and culture, called PF-classified stands. This was done by: ? Describing silviculture models from the literature that are possible to use for stands with combined goals. ? Describing silviculture models that is used in practice in stands with combined goals. ? Describing how the classification of stands with combined goals is used. Which means, were in the terrain, with which frequency and in which type of forest PF-classification is used. ? Comparing differences and similarities of theoretical and practical used models. The study was done partly as a literature study and partly as an interview study of forest planners.

Booth for operational planning of harvesting and for long term planning, data is today collected manually. Intensive objective field inventories are usually too expensive. To enhance optimisation of timber flow from forest to industry Moore efficient methods for measuring tree stems of standing trees are needed. The performance of terrestrial laser scanners have improved and these could possibly be used within forestry in the future. The objective of this study was to validate how a terrestrial laser scanner could be used to measure stem diameter, and to test how the errors depend on distance from the scanner and tree species. Two plots (one pine and one spruce) were used for this study.

This thesis is based on a market survey sent to the passive members of Södra skogsägarna within the scope of practice of Vimmerby. A member of Södra skogsägarna is considered passive if the member not has delivered timber to the association during the past five years. The purpose of this thesis was to obtain as much information as possible about the forest owners, to be able to interpret why the member did not choose to deliver their timber to the association. The survey was worked out in close collaboration with Södra skogsägarna to answer this question. The responses indicate that economic returns are important to the individual landowner. The price of timber is most important in a timber business and the majority of forest owners want to have a personal meeting if you can choose how you wish to be contacted by the inspector.

Since the Bruntlandreport was published 1987, companies have shown their environmental commitment through an environmental account. Companies started these accounts because their rivals started having them and today most large companies have a environmental account or sustainable development report. The information given by the companies have been seen as slanted, and others see it only as a part of the image production for the companies. There have been several investigations of the stakeholders of environmental reports and it is not clear who is the primary stakeholder, in other words who actually reads them. All different stakeholders have different views of what an environmental account should encompass.

To curb greenhouse gases and mitigate climate change is one of the biggest challenges human society face today. Carbon dioxide (CO2) has accumulated rapidly in the atmosphere as a consequence of burning of fossil fuels and deforestation. The aim of this study is to explore two methods to store carbon dioxide in geological formations and biological sinks. The aim is also to discuss the two mitigation options from a sustainable perspective and whether it can lead to a better environment and benefits for local and global societies. The research questions are: Which method to store carbon dioxide, geological or biological, is the most effective? Which method to store carbon dioxide, geological or biological, has the greatest potential to promote sustainable development for local communities?The method used is a comparative case study and presents four case studies that explore the potential for CO2 storage offshore in Norway and Brazil; and in tropical forests in Mexico and Brazil.

Detta är vårt C-arbete där vi valde att göra ett sällskapsspel av vår frågeställning. Spelet går ut på att producera en film, den spelare som producerar den bästa filmen vinner Oscar för bästa film och även spelet. När man spelar spelet så lär man sig hur en filmproduktion går till och vilka komponenter som är extra viktiga när det gäller bedömningen för vinnaren av Oscarstatyetten för bästa film..

This thesis was carried out to give some background information to a report of SLU (Swedish University of Agricultural Sciences) for the Swedish National Rail Administration (Banverket). The requested information was to provide basic data for an environmental impact assessment of the construction of the tunnel through Hallandsås. The aim with the thesis work was to discuss and quantify the leaching of nitrate and the emission of nitrous oxide from the soil at the groundwater level established through the tunnel project. The nitrogen related processes that could be affected were described and discussed. The different areas where a decreased groundwater level can cause changes in the nitrogen processes are the wet and moist areas.

Bergvik Skog is one of the leading forest companies in Sweden who use airborne laser scanning for forestry information. They utilize laser data retrieved by the Swedish National Land Survey to describe the forest holdings and facilitate planning for thinning and final felling operations. However, the possibility to identify stands with clearing needs by using laser scanning data has not been tested in a large scale. The data used in the current study are field data from The Swedish National Forest Inventory in combination with laser data from the Swedish National Land Survey acquired in 2009. The collected data is used to find one or several laser variables that best describe the relationship of the field measured samples with clearing needs.

Femsjö is a small parish situated in Hylte municipality, Växjö diocese. The parish has a total area of 8230 ha of which 5000 ha are covered with forest. There have not been any large industries in the parish offering work opportunities for the inhabitants, so they have had to generate income from their land and the forest. Instead of going to the bank to get a bank loan the people of Femsjö parish went out in to the forest and harvested trees for timber and extra cash revenue. Production of pine tar and potash were two other ways that the residents of Femsjö parish could earn extra money for the household in order to keep starvation away.

The purpose of this essay is to see if villages or bigger settlement locations can be found in south-eastern Blekinge during the viking age. There have been many archaeological findings from this period in Blekinge, for example grave findings, ring-forts , old roads and ancient harbors. But no evidence of a village has been found yet. If south-eastern Blekinge is compared with the area surrounding Järrestad on Österlen in south-eastern Skåne and the area surrounding Sorte Muld on Bornholm, many likenesses can be seen. In this essay, the findings in Blekinge will be used as different components when the three areas are compared with each other.

The activities of beavers in forested landscapes affect both ecological and economical values. The creation of the dynamic wetland mosaic associated to beaver activities can even improve the quality of water and have been documented as an important landscape engineer affecting the environment for many species. The local office of Sveaskog in Skinnskatteberg is responsible for the management of large areas of the forests in the County of Västmanland. In this area one of several company?s goals are to create ten new wetlands in their own forests as a part of cooperation with the Swedish bird society and Swedish wetland association.

It is essential to reuse- and recycles residues to decrease the amount of deposit materials and reach sustainable energy use. Two ways to work towards this is to recycle wood ashes to the forest as nutrient compensation and extract biogas from combustion of biomass.The aim with this study was to decide whether wood ashes that been used for biogas upgrading with accelerated carbonation also can be used as a nutrient compensation in the woods according to recommendations from the Swedish Forest Agency (Skogsstyrelsen).The ashes that were used in this study came from Johan Andersson who works at JTI in Uppsala, who also treated the ashes with biogas. The ashes have, in both untreated and treated condition, been analyzed in this study according to contents of elements, leaching properties, hardening properties and contents of crystalline phases, to evaluate what impact carbonation with biogas has on the ashes.The accelerated carbonation led to hardening of the ash, and decreased amount of CaO- and increased amount of CaCO3. The CO2-uptake also entails a dilution of the elements, and the content of nutrients and trace elements decreases. However the results show an indication of an uptake of S from the biogas to the ash, since the dilution had a smaller impact on S than the rest of the elements.

Previous studies of central tire inflation (CTI) in truck transport of roundwood have shown potential benefits to include more even wood flow and reduced road damage. The greatest benefits are found to be during periods of low bearing capacity such as spring thaw. No previous studies have examined geographical variations in the potential benefit of CTI-equipped trucks. The aim of the study was to develop and use a simple method for geographically prioritizing the use of CTI-equipped trucks within a forest company´s sector of activity.The host company for the study was Holmen Skog. The area studied consisted of Holmen Skog?s entire sector of activity extending from the province of Västerbotten to the province of Småland.

On a highly competitive market, quality is an important aspect to take into account, both in terms of goods and services. The Swedish timber market is very competitive and to achieve long-term success focus on the customer, in this case private forest owners, is a prerequisite. SCA Skog AB Jämtlands forest management administration is dependent on the acquisition of timber from private forest owners to fulfil their mission to the supply of SCA's paper and sawmills in Sweden with raw material. To be able to develop the cooperation with private forest owners, the administration investigates their quality management by measuring the customer satisfaction index (CSI). The purpose of the study was to identify a practical and systematic method to handle deviations and suggestions for improvements to achieve a higher customer satisfaction.