Sweden have 419 000 km road in the country and about half of these roads is forestroads. The Forest road net most important mission is to make it possible to deliver wood from the forest to the industries. With a raw material that is spread over a large area the road network is important. Each year has the Forest road network been extended with about 1 700 km new roads. To decide if a new road is to be built different Forest road cost estimation models has been used.

This report discusses questions concerning wear on Forest roads. The purpose of the work is to investigate if the wear on the roads will decrease when the speed limit gets lower for the trucks that transport the wood. A normal Forest road, class B, was used in the study. In total 5000 m3f timber was transported on the road. Data about the road was measured with a profilograph car before and after the timber transport.

The basis of road investments is to minimize the transportation cost. The forest industry wants roundwood to be available during the whole year. One way of determine which road to invest in is to do a cost/benefit calculation. SCA Forest lacks a uniform approach to determine the utility of a road investment. The goal of this report is to describe how the organization works today and find areas of improvement. The data collection was done through interviews.

The forest industry is one of the most important industry branches in Sweden. Since the demand of high precision wood deliveries has increased, the demand on a well constructed Forest road net also has increased. A good road net gives the wood-supplier competition advantages and also increases its service level towards its customers, lumber-mills and pulp-mills. In some parts of Norrbotten, the road net is still insufficient and not yet built out enough, and that is why it is important to know how to act and where to improve the road net in these areas. The purpose of this thesis was to create a work-model for long term road planning in areas with no road net or a not yet complete road net. The model has been created in an ArcGis environment, where a long chain of tools has been tied together with the program ?Model builder?.

Inventories of epiphytic lichens on Scots pine (Pinus sylvestris) were conducted at three sites in east central Sweden: along the newly build motorway (Road E4), along the old road (Road 600) and in a reference site, to compare the effects of traffic pollution on lichen diversities. At each site, species richness, lichen mean sensitivity value (MK), air quality index of the forest stand/sample plot (LKI) and nitrogen impact value (N) were calculated and it was tested if there was any difference between the sites. Twenty-four species were observed in total, and Parmeliopsis ambigua and Hypogymnia physodes were the most common species at all sites. At Road E4, fewer lichen species were observed than at the other sites and this might be due to the impact of air pollution. The species richness at Road 600 was similar to that of the reference site, which might be explained by the improved air quality.

The problems around and the planning of wood flow is some of the most complex issues in the forest-sector. The experience and overview of the single employees is crucial for the possibility of correct tactical and economical decision-making. The increasing demand of savings and shorter reaction-times with greater flexibility in the wood-supply-chain, makes solutions and aids for improved effectiveness in the work and processes according to wood-flow urgent. Holmen Skog is starting to develop a new forest-road-management-system. The system will facilitate the work according to construction, improvements and updating the standard of roads.

The purpose of this report is to investigate and compare the difference between stand-thinning machines and strip-road thinning machines, and how they affect the stand on behalf of future growth, theoretical economic result, wind impact, snow pressure and density of stand. The investigation is regarding the first commercial thinning of pine stands, after pre-commercial thinning that was well conducted. The investigation area was located near Katrineholm, Sweden. The measurements that were measured were strength of thinning and amounts of wind throws, snow-breaks and hauling damages. The results that emerged, was that thinning with strip-road machines had a significantly higher strength of thinning over all, as compared with the stand- thinning machines (45 percent versus 30 percent). Comparisons between wind-throws, snow-breaks and hauling damages of the stand could not establish any significant differences between the two methods that were investigated. Conclusions, over all, were that if forest owners want to have more timber volume left for second thinning and final cut of the stand, the forest owners should choose the method with stand-thinning machines. From the point of view of gentle treatment of the stand and ground damages the choice should be the same. However, the method with strip-road thinning machines is the most common and accessible method in Sweden. Most likely it is the most economical way to manage the stand for forest owners in present time. If the method with stand-thinning machines is becoming more common in Sweden, it is suggested for forest owners to consider the stand-thinning method as a candidate for treatment due to economic aspects..

A great deal of the nature experience we get today is from travelling along our roads, which to a large extent go through the forest landscape. This makes the forest along our roads interesting to look at from a nature experience perspective. The main idea of this work is to increase the awareness of how we are affected by the forest when we travel through it and find out how the forest should be adapted to the road environment to create a pleasant nature experience as well as increase traffic safety. 0.9 % of Sweden's total forest area (equivalent to 200 000 hectares) is in close proximity to roads. Additionally, in Sweden 440 million hours are spent behind the wheel of which a great deal probably is spent on roads surrounded by forest in some form.

SCA is the largest private owned forest owner in Sweden, with an ownership of 2 million hectares of productive forestland. To manage the planning of such large areas and to fit the traditional organization structure of a Swedish forest company, the planning approach is subdivided into three stages; strategic, tactical and operational. The strategic part, based on a statistic sample of stands, returns a harvest level estimate which should then be implemented at actual sites in the tactical part. This procedure can lead to incompatible solutions as the strategic solution is not necessarily possible to translate into actual sites in the tactical plan. The geographic aspect is important in tactical planning due to the large costs for moving equipment and maintenance of a large number of Forest roads.

During 2006 SNVDB (the national road data base for forestry) is being introduced to Holmen Skog. This data base contains all information about Holmen Skogs road systems. The information will then be used in different kinds of optimisation models which only produce correct and reliable results if the input data are of the adequate quality. Today there are reasons to believe that road data is of various qualities. The Forest roads are often in a bad condition and have to be improved before a planned harvest. The cost of maintenance and construction of new roads is a large part of the total harvesting cost.

Transportation constitutes a large part of the forest industry's raw material costs. Transport also contributes a significant proportion of the carbon dioxide emissions. In order to reduce both the cost and environmental impact different types of decision support are required. These, in turn, require extensive information about the road network and correct information on road path selection and transport distances. In the development of national road data base for forestry (SNVDB) a road selection application has been included.

The purpose of this thesis was to create a strategic/tactical road access plan. This was done by designing an analytical method which gives the road manager a template to create long-term road access plans. The analytical method will help to identify and appraise roads to be upgraded and give information when it is time for building new roads. The study method involved developing an analytical method. The method was comprised of five main parts: the harvest plan, analysis of the road network, transport costs, quality and storage costs and finally, identification of investment alternatives.

To regularly remove woody vegetation along the roadside of Forest roads is an important part of the road maintenance, since the vegetation binds moisture in the road side and, thus, the removal makes the road drying faster with results in improved bearing capacity. Vegetation removal also makes it easier to upgrade the road by material recycling from the ditch and, moreover, the visibility along the road is maintained.The aim of the study was to evaluate what type of chain flail is the best and most cost-effective for removal of different kind of woody vegetation along Forest roadsides.Time studies were made on two chain flails when removing woody vegetation in three different classes; easy-, middle- and heavy shrub removal. The studied flails were one light and rather simple flail named Optimal M160 and a heavier and more advanced flail named Slagkraft H210. The removal was made according to Holmen Skogs? specification and the quality of the cleaning was measured by objective belt inventory.The productivity was higher with the heavy flail within all cleaning classes.

The last decades the populations of wild boar (Sus scrofa) has increased rapidly over the species? entire European range, including Sweden. This is followed by increasing human-wildlife conflicts as a result of the wild boar foraging behavior, causing damage to agricultural crop fields due to trampling and feeding. To be able to minimize damage we need more knowledge of where in the fields the risk of damage is high and what features in the landscape that affect this risk. I analyzed damage distribution in relation to the distance to six different landscape features; forest, road, ditch, building, game field and bait station, in the study area, the Island Mörkö in eastern central Sweden.

SCA is the largest private owned forest owner in Sweden, with an ownership of 2 million hectares of productive forestland. To manage the planning of such large areas and to fit the traditional organization structure of a Swedish forest company, the planning approach is subdivided into three stages; strategic, tactical and operational. The strategic part, based on a statistic sample of stands, returns a harvest level estimate which should then be implemented at actual sites in the tactical part. This procedure can lead to incompatible solutions as the strategic solution is not necessarily possible to translate into actual sites in the tactical plan. The geographic aspect is important in tactical planning due to the large costs for moving equipment and maintenance of a large number of Forest roads.