This report discusses questions concerning wear on forest roads. The purpose of the work is to investigate if the wear on the roads will decrease when the speed limit gets lower for the trucks that transport the wood. A normal forest road, class B, was used in the study. In total 5000 m3f timber was transported on the road. Data about the road was measured with a profilograph car before and after the timber transport.

This study includes a life cycle assessment, LCA, on an ecological produced cotton shirt for the company Reflective Circle, which designs ethical and ecological clothes.Initially were cotton farming and textile production studied to gather basic knowledge about the processes. Since this shirt is being ecological produced in the whole production chain, we studied what an ecological production means, but also how a conventional production works. When this was done we could start to discuss the differences and similarities between the production of the shirt and general conventional production.When the LCA was first initiated, the main focus was on the green house gas emissions from the manure at the cultivation. Thereafter the process steps such as picking, ginning, carding, spinning, weaving and sewing were being studied. The picking is done by hand, but the rest of the processes are handed by machines which consumes energy.

How affected are the sugar production in Mozambique and Tanzania by EU sugar regime? What does the EU sugar reform constitute in these countries?Using theories regarding free trade and anti-free trade, I am able to answer these questions. The aim of this paper is to study how the various sugar agreements with EU affect the sugar production in Mozambique and Tanzania. Therefore I am using a method called a most similar system design in this comparative case study. The conclusion is that the EU sugar regime is the main reason to how the sugar productions in developing countries are.

Detta är en magisteruppsats i arbetsvetenskap utförd under vårterminen 2014. Studiens syfte har varit att undersöka arbetsmotivationen bland anställda i en tillverkningsfabrik som implementerat principer och verktyg från lean production. Utgångspunkten har varit att undersöka om element i lean production, så som teamorganisering och delaktighet, har en positiv inverkan på inre motivation. I studien operationaliserades inre motivation som arbetstillfredsställelse och engagemang.     Studien utgår från en kvalitativ ansats med ett hermeneutiskt perspektiv. Datamaterialet har insamlats från sammanlagt 12 respondenter, samtliga från samma fabrik i Svealand.

The purpose of this study was to examine how teachers act when it comes to play with constructions in preschool. The purpose was also to find out what kind of material the children have to work with and what they do with the things that the children made. The study was based on qualitative semi-structured interviews. Semi-structured interviews was choosen  to get out as much information as possible, with open questions in a semi-structured interview you can get the information that is relevant for the study. The results show that there are different kind of material available in preschool, but knowledge of the subject is missing and demanded by teachers. The material are pretty similar, some of the teachers use material from the forest while others don?t.

There are several reasons why organic chicken production is scarce in Sweden. Lack of slow growing (SG) strains combined with higher production costs, lower meat-yield and uncertainty of consumers? willingness to pay seems to be the main reasons. EU-legislations imply use of indigenous slow- or medium growing strains in organic production, nevertheless, fast growing (FG) broilers are often used due to their effectiveness. Increased consumption of processed food creates a market for conventionally rearing of very heavy broilers.

Stronger demand has been put on forestry to show environmental considerations during harvesting. This is especially for crossings of brooks with sensitive elements and great care should be observed when they are to be crossed during harvesting by logging machines. For that reason Hultdins has constructed a portable bridge that can be used for those occasions. The bridge has been developed in accordance with wishes from SCA forest, since they have a great deal of brooks in their forests and in private forests from where they buy part of their wood supply. The aim for this report is to investigate if this portable bridge can be of interest for the forestry market. The research has been made at SCA skog in Medelpad and Norrskog in Medelpad.

This literature study deals with the pig industry and how group size and available floor area affects the animal welfare and the production results. It shows that both the pigs? welfare and production result can be affected negatively if the environment seems stressful for the pigs, and if they are housed in a narrow area. If the pigs are being exposed to either physiological or psychological stress factors their immune system can be decreased and the growth can be impaired. Influence by the social status of the pigs is also reviewed.

 The sawmill industry is a relative fragmented industry that is in an economic upswing andwith a hard competition. The customers have high demands on their suppliers and the highcustomer demand make it necessary for the companies to make a streamlining in planningand production. For that reason it is very important that the planning- and productionprocesses aren?t to complex and with a simple structure.The purpose of this report is to study and map out a marked out part of a planning- andproduction process, from adjust works to final delivery, at a company in the sawmill industry.Different methods have been used for the report, among others interviews and subordinatedmaterial.We have mapped out a marked out part of the planning- and production process at theCompany. This part we have studied, and we have analysed the process it self and otherthings connected to the process.We see the planning- and production process in the Company as complex.

Due to a constantly increasing competitive pressure it is of great importance to constantly strive for improvements in order to gain competitive advantages. Lean Production is a concept that has been introduced with the aim to minimize waste and increase profitability. The purpose of this report is therefore to investigate how to perform effective planning according to the principles of Lean Production, in companys with customer exclusive products, through a case study at Sandvik Mining and Construction (SMC), and to investigate how SMC kan improve their planning of drifting rods at the production unit in Sandviken.The study started by creating a theoretical framework, to describe the subject planning and planning based on Lean Production. This frame work constituted the base for the case study which took place at Sandvik Mining and Construction, and also for the model and planning tool that has been introduced.The result of the study is partly a general model with factors that contribute to a more effective planning. These factors has beed identifed as SMED, which focuses on reducing set up times and in the end to facilitate the planning.

AbstractManagement is a field that started getting attention in the beginning of the 20th century by Frederick Taylor. His publication is called the Principles of Scientific Management and is based on the principles of using scientific methods to find the best way of conducting each operation within a production facility. Many of Taylor?s principles may appear obsolete today but the matter of an effective material flow is still highly current. Efficiency is the relationship between the input into an operation and its result.

The purpose with this study is to find out how much dead wood we can expect us to find in a Russian reference river and compare with studies from Swedish streams. Dead wood are an important structure for the biodiversity in forest streams, studies have shown that population of trout can increase with up to 300 % when the amount of dead wood are increasing from 0 to 8 ? 16 LWD (Large woody debris)/100 m2. Dead wood are also an important structure for the stream character, formations of dams and pools which are important habitats and reproduction areas for salmon and brown trout. The study where taken place in tributaries to the Russian river Varzuga in the North West part of Russia outside Murmansk. Varzuga has low impact of human activity and is considered to be a reference river to rivers in northern Sweden.

Thinning is one of the most important silvicultural activities in middle aged forests, partly to minimize damages and partly because it leads to earlier harvesting revenues and increases the value of the remaining trees. There are many different indices used to describe stand density and thereby the need of thinning in forests today. Studies have shown that forest variables can be estimated with high accuracy using airborne laser scanning and it is likely that the method could also be used to estimate forest density indices. In this study, the possibility of using the forest density index ?H² to determine and map priorities for thinning operations for a forest area was examined.

Communication, information and marketing are three of the main prerequisites for companies that want to increase their turnover. The everyday work for a Forest Manager within the forest owners? association Mellanskog consists to a large part of interpersonal communication, either by close vicinity contact or by phone calls. Interpersonal communication is time consuming and resource intensive. If the flow of information, communication and marketing does not function well then there is a lack of a base for development.

The production costs have steadily increased within the construction industry during the 21st century. Voices are raised meaning that the construction industry is too unsuccessful in making the production more efficient and to develop it?s way of working. One way to deal with the production costs is to minimise the waste, with waste meaning activities that doesn?t add value to the finished product.