The use of fossil fuels such as coal and gas are a contributor to the global warming. The climate change is a worldwide problem with far reaching consequences that is believed to be very expensive. The United Nations has been introducing a framework convention on climate change. One component of the convention is the Kyoto protocol. The protocol is obligating the developed countries to decrease their emissions of greenhouse gases by 5.2 percent during the time period 2008-2012.

The hybrid larch (Larix x eurolepis Henry) is a fast growing tree species and was introduced in Sweden for about 50 years ago. The high growth and expected resistance to diseases are probably the main reasons of introducing the tree species into the Swedish forests. The purpose of this thesis was to document the production of hybrid larch planted in the Snogeholm landscape laboratory and to compare the production in the pure hybrid larch stand with the mixture together with pedunculate oak (Quercus robur). The data collection in Snogeholm since the establishment has been carried out by the Swedish University of Agricultural Science (SLU). The fieldwork for the thesis was carried out in 3 stands, containing hybrid larch, pedunculate oak and a mixture of hybrid larch and pedunculate oak, in order to be able to compare the total stand production of the areas. The results show that the total production of hybrid larch in the mixed stand only is 35 % compared with the total production of hybrid larch in the pure stand. Therefore, the hypothesis that the total production of hybrid larch is equal to the planted mixture with pedunculate oak was rejected. The other hypothesis that the total production of a 2 hectare large stand containing a mixture of hybrid larch and pedunculate oak would be greater than the total production of two pure stands of 1 hectare containing hybrid larch and oak each was also rejected. In the studied case the total production was 45 % greater if hybrid larch and pedunculate oak was planted in pure stands. The results from the case-study only indicate that the total production of hybrid larch and oak under the investigated conditions can be higher when planting the two species in pure stands compared with a mixture of the two species.

The last decades the populations of wild boar (Sus scrofa) has increased rapidly over the species? entire European range, including Sweden. This is followed by increasing human-wildlife conflicts as a result of the wild boar foraging behavior, causing damage to agricultural crop fields due to trampling and feeding. To be able to minimize damage we need more knowledge of where in the fields the risk of damage is high and what features in the landscape that affect this risk. I analyzed damage distribution in relation to the distance to six different landscape features; forest, road, ditch, building, game field and bait station, in the study area, the Island Mörkö in eastern central Sweden.

AbstractLean production has become one common concept within industries to make the work more effective and to meet today?s hard competition. A challenge for Chinese production is the threat from new low cost countries. It will become very difficult to succeed to produce to a lower cost than these countries; this led to that Chinese companies must develop new strategies, according to Lee and Zhou (2000). This will put China in front of new challenges and new strategies can be needed to retain their strong competitive advantages.

Forestry is an important industry in Sweden, with clear-cut as the most commonly used method for harvesting. Here the long-term impact of clear-cut on lake water quality (dissolved organic carbon (DOC), nitrogen, phosphorus and pH) has been investigated, based on 23 lakes sampled during autumn. Data for additional 15 lakes sampled for the Swedish monitoring program were also used. Lakes were classified as 5, 25, 40 and 60 year based on data of the forest age in the catchment, gathered from the Swedish national forest inventory. Clear-cut lakes were classified as 5 years (>20% of the catchment clear-cut during the last 10 years).

The purpose of this study is to investigate the forest managers view of the edu-cation at the School for Forest management at SLU and the first years of em-ployment. Surveys were sent to batches 05/08, 06/09 and 07/10 a total of 136 question-naires were sent out. 80 people answered the survey, this gives a response rate of 59 percent The former students rated according to a 9-grade scale how satisfied they were with the different courses they had attended during their years as students at the school. The courses in mathematics and statistics got the highest marks with an average of 7.3, while the entry-level course in law only got an average of 4.6. A major part of the former students had in the questionnaire enquired a leader-ship course and a business course with focus on negotiation techniques during their education. There is a wide variety of employment opportunities for the graduated students. Timber buyers and forest managers or planners are just a few positions that for-mer students now possess. The study shows that there is a big difference in the first introduction to a new work place depending on where the student got hired.

This graduation work is a result of implementing Lean Production using OEE and SMED at Enics Sweden AB in Malmö. Enics doesn?t have an established improvement concept and therefore should this work serve as an introduction to possibly start with Lean Production. A result in this report is that an OEE value has been identified within a common order at Enics. Other results are that an implementation of a Lean-board has been implemented and furthermore, within SMED, a flag that indicates changeover..

When a company in the manufactory industry makes costly investments, it's important that these are used as much as possible. The company in this case claims that their invested robot cell, with CNC machine isn't used enough. The questions here are: How can we improve the use of the robot cell? Which products are appropriate for the production in the robot cell? As a method to come to a conclusion, an analysis has been made over the manufactured products. And also interviews with machine operators and the production management.

The aim of this study is to review the commercial quail production for eggs and meat in the world. Another aim is to review the potential for increased production. Globally the quail production is very small, except in China where it is the second largest poultry industry. The production globally is small despite the quail's rapid growth, early sexual maturity and its high feed efficiency. The quail is also used as a laboratory animal and can be reared to be released in hunting areas.

People have used forest resources in northern Sweden for different purposes. Before the 20th century the forest was used for many different reasons, but during the past 200 years it has become an industrial raw material. The presence of people in the forest has left different kinds of traces in the forests. One example is culturally modified trees (CMT´s). The aim of this study was to study and document how people have used the forest resources during the last centuries in Brännlidens nature reserve, and what kind of traces this land use has left.

SCA is the largest private owned forest owner in Sweden, with an ownership of 2 million hectares of productive forestland. To manage the planning of such large areas and to fit the traditional organization structure of a Swedish forest company, the planning approach is subdivided into three stages; strategic, tactical and operational. The strategic part, based on a statistic sample of stands, returns a harvest level estimate which should then be implemented at actual sites in the tactical part. This procedure can lead to incompatible solutions as the strategic solution is not necessarily possible to translate into actual sites in the tactical plan. The geographic aspect is important in tactical planning due to the large costs for moving equipment and maintenance of a large number of forest roads.

The purpose of this study was to evaluate the different substrates that enter the digestion on Sundet wastewater treatment plant for production of biogas.This work have done an analysis of data about the biogasproduction from January 2012 to feburari 2013, this showed that the food substrates has a greater gas production than internal sludge.Through laboratory test the VS, TS and COD values for all the substrates used in the biogas production could be determinded. But the COD-method was less optimal for analysis of fat and food, therefore it optimized the method for fat but due to time constraints, this could not be done on the food substrates..

I Sverige är trakthyggesbruk med kalhuggning det dominerande skötselsystemetmen intresset för kalhyggesfritt skogsbruk har ökat de senaste åren. Alternativentill kalavverkning är omdiskuterade och kritiseras ofta för att inte vara lönsamma.Målet med detta examensarbete är att analysera ett långtidsförsök med olikaskogsskötselsystem och att diskutera eventuella produktionsskillnader. De fem skötselåtgärdersom undersöktes var 1) kalavverkning med plantering av gran och tall,2) naturlig föryngring under fröträd, 3) blädningsbruk, 4) dimensionsavverkningoch 5) orörd skog (referensyta). Fältförsöket ligger på Siljansfors försökspark iDalarna och anlades 1923. Alla försöksytor har en areal av 1 ha.

The scarcity of qualified forest machine operators as well as the increased competition for competent machine operators among others from the mining industry in Norrland, were the reasons to investigate what attracts and what deters active and potential forest machine operators to the occupation. An interview study was conducted among four groups with four persons in each group. The groups were students in year 1 and 3 respectively at a forestry school at upper secondary school level as well as employees of a forest company and employees of contractors. The majority of all respondents were of the opinion that their interests in machines had been important for the choice of occupation. But for the active machine operators both the interest in the forest and their interest for machines have had importance for choosing this occupation.

The report is about efficiency of a current production group where there is no clear production flow and there are some buffers between the operations. The efficiency is done with the help of a tool that is calledWork process of flow production which is used by Atlas Copco CTO. The most obviously results are that the lead time drops from 25 hours to 425 minutes and that the balancing loss decreases from 85 % to 8 %. The report focus on decreasing transports, decreasing buffers, more reliability in lead time and quality. And a more stimulating labour content for the workers is another result..