A couple of hundred years ago half of the earth?s surface was covered by forest. Today, only half remains and every year an area the size of Nepal is disappearing. Deforestation, together with the burning of fossil fuels, is also one of the reasons for the increasing greenhouse effect. Another relatively unknown problem for the world?s forests is the trade with illegally harvested timber.

Steam was used as a site preparation method to eliminate unwanted bilberry (Vaccinium myrtillus L.) in the boreal forest. The efficiency of steam to suppress bilberry was compared with prescribed burning and cutting the bilberry. Different combinations of steaming and/or cutting the bilberry were set up to investigate in which way steaming and cutting influenced the sprouting and regrowth of bilberry. The regrowth of the bilberry vegetation was monitored for 40 month. Steam was most efficient in suppressing bilberry.

När ett haveri inträffar uppstår direkt en mängd olika kostnader i form av underhållsinsatser, reparationsmaterial och administrationsinsatser. Utöver dessa kostnader förloras även de intäkter som maskinen genererar samt täckningen för de fasta och rörliga kostnaderna. Alla dessa kostnader skall täckas av de värdeskapande enheterna på företaget och påverkar det finansiella resultatet negativt. För att förbättra ett företags lönsamhet ökas antingen intäkterna eller så reduceras kostnaderna. Trots detta är det för många företag okänt hur stor kostnaden faktiskt är då en maskin står stilla.Arbetets uppdragsgivare är Konecranes Machine Tool Service (MTS), ett företag som erbjuder underhållstjänster och underhållslösningar till företag inom verkstadsindustrin.

Volvo Construction Equipment is one of the worlds largest manufacturer of heavymachinery. In Braås, Sweden, they develop and manufacture articulated haulers inseveral sizes. The biggest, the A40, is capable of loading almost 40 metric tonnes.These haulers have a bogie to distribute the forces of the load evenly onto the two axlesand there wheels. The bogie is constructed using a rigid balance beam on each side ofthe frame connecting the axles or an independent solution using hydropneumatics.An analysis has been made in order to establish the forces created during corneringand through the theory, an estimation of the extensive tyre wear and extra fuelconsumption has been made. All due to the effects of the tyres not being inline with thecornering radius.

The main purposes of this study were to 1) quantify bacterial production in winter during ice conditions, and 2) to compare these production measures with values measured from summer and open water conditions in three humic lakes situated in northern Sweden. Another purpose of this study was to 3) examine whether clear-cutting significantly affected bacterial production or water chemistry in two lakes situated in catchments were a large part of the forest had been removed through logging compared to an undisturbed reference lake. In winter (March/April 2014), the bacterial production ranged from 0, 7 - 2, 2 µgC/L/day and in the summer of 2013 the production values was 4 ? 10 times higher. The main reason for lower bacterial production in winter was ascribed to lower water temperatures as well as to older and more recalcitrant DOC, as there were no significant differences in total dissolved nitrogen or DOC concentration or -quality, that could explain a lower production compared to summer.

For centuries, springs have played a significant role in our society as water supplies, reasons for where to settle down, and in folklore. There are different reasons why and where a spring forms, e.g. in what kind of soil it has its outflow. Geographic and geochemical surroundings have an influence on spring-water quality.For this project some of the springs in the Lagga perish, Knivsta municipality, Sweden, were selected for a closer study. Water samples were collected from springs for analysis.

Are agency and responsibility solely ascribable to humans? The advent of artificial intelligence (AI), including the development of so-called ?affective computing,? appears to be chipping away at the traditional building blocks of moral agency and responsibility. Spurred by the realization that fully autonomous, self-aware, even rational and emotionally-intelligent computer systems may emerge in the future, professionals in engineering and computer science have historically been the most vocal to warn of the ways in which such systems may alter our understanding of computer ethics. Despite the increasing attention of many philosophers and ethicists to the development of AI, there continues to exist a fair amount of conceptual muddiness on the conditions for assigning agency and responsibility to such systems, from both an ethical and a legal perspective. Moral and legal philosophies may overlap to a high degree, but are neither interchangeable nor identical.

In the near future we need to reduce the greenhouse gas emissions significantly for the benefit of the environment around us. The European Union has de-manded a variety of climate and energy goals to be achieved by year 2020, the ?20-20-20? targets. With these aims, The European Union means that we must reduce our emissions from fossil fuels and instead increase our renewable fuels. With stump harvest in the forest it?s possible to increase the use of renewable fuels and reduce our emissions from fossil fuels.

Abstract The purpose of this project is to develop a modular processor card which is intended to work as a platform for Kitron Development Karlskoga. The modular processor card is meant to be used as a control system in development projects, mainly in medical and industrial products. The processor card will consist of a central unit with the basic functions for a control system. Furthermore there will be complete modules with machine commodity and programming, to pick exactly the necessary functions for a specific application. With consideration to the specification of the development and the main unit, I chose an adequate microprocessor (AT90CAN32) as core and interface circuits to stated border areas. The construction is first completed in the program MultiSim and then remade in the program OrCAD Capture. The programming language C was used in the software model.

This thesis has been made in cooperation with the forestry machinery producerEco-Log in Söderhamn. The focus of the thesis has been to find a cheaper wayto open the large engine hood of the company?s harvesters. The goal was tofind a solution that could increase the value for the customers by being saferand simpler to use, or, at the least, keep these values at an equal level comparedto the previous solution.In order to make it possible to CE-mark the new solution, it was importantMachinery Directive that came into effect from the beginning of 2010.To begin with, a specification of requirements was set up. Thereafter, anumber of different basic concepts was retrieved and evaluated.

The number of sawmills in Sweden has decreased dramatically since the 1980s and the trend looks set to continue. The sawmills that are left instead becomes larger and are situated farther apart. In northern Sweden, they are concentrated along the coastline.In our study, we compared conditions for running a sawmill in inland areas and coastal areas and looked at what factors have the greatest impact on the profitability of the sawmill in northern Sweden.We chose to compare different locals conditions for a sawmill that only sawn pine timber and had an annual raw material requirements of 300 000 m3ub per year. By analyzing the kNN-data from the Swedish National Forest Inventory we have taken out the size of the timber volume at each site and its catchment. We have also looked at possible competitors in the areas that may affect the purchase price of the commodity.

Good comfort for the driver of a construction machine is crucial. Gearshift comfort is an important part of the total comfort. Volvo Construction Equipment Components has a simulation environment of the powertrain, SimPow, which is implemented in Matlab/Simulink. SimPow is mostly used for simulation of control strategies and performance. In order to be able to study gearshifting comfort, Volvo has an interest in developing new models for SimPow.

This is a degree project performed at Halmstad University in Sweden on the subject carpet ofreinforcement. This project is developed in association with Celsa Steel Service in Halmstad.The purpose of this report is to investigate how much time that can be saved if carpet ofreinforcement is used instead of the traditional way to work with reinforcement and seewhat kind of parameters that is important between the choices. We are also going to seehow this product affects the situation for reinforcement workers from an ergonomic point ofview.Carpet of reinforcement is made by straight reinforcement?s bars that are welded togetherwith steel bands. These rolls are made at a factory with a machine that welds together thebars in determined centre distance, with desired dimensions after the constructionengineers? blueprints.

In this essay, I have interviewed four pedagogues from three preschools whit different pedagogical purposes. The purpose was to find out how they work with mathematics outdoor. In addition to interviews, I have conducted observations at each preschool. The different preschools are one traditional, one Reggio Emilia and one ?all weather? (Friluftsfrämjandet) preschool.

This thesis work is made by Torbjörn Johansson on Karlstad University for Uddeholms AB. The assignment in this thesis work was to investigate tough cutting in three different tool steels: Vanadis 4 Extra, Vancron 40 and Sverker 21. The research was to compare the wear of the tool after cutting in each one of the tool steel alloys. The research was also made to see if the tool cutting in Vancron 40 has a better wear than the tool cutting in Vanadis 4 Extra and also compare the results with Sverker 21. All three of these alloys are a part of Uddeholms AB:s range of products, and is used in applications like forming tools and knife tools. Vancron 40 is a powder steel with a very good combination of mechanical properties like ductility, adhesive strength and hardness.