This report is a thesis work for a B.Sc. in Forestry exam at the School for Forest Engineers, SLU. The work was an assignment from Södra Skogsägarna and the aim of the work was to investigate the economical and biological output after mechanical planting with Eco-Planter compared with traditional manual planting. Eco-Planter is a tool for mechanized planting, fixed at the end of the boom on a conventional harvester. The study confirms that manual planting is less expensive under normal conditions. However, the differences between mechanized and manual planting are not that big and with technical development and/or increased labor costs together with an improved work organization the system with Eco-Planter could be competitive. The biological output, e.g. planting result and survival rate, seems to be quite good.

Many wood living insects are considered threatened by modern forestry due to the reduction in amount of dead wood. During the last decade various methods have been used to enhance the quantity of dead wood in managed forests. However little is known how and if these methods are aiding saproxylic insects. The threatened tenebrionid beetle, Upis ceramboides, is already extinct in southern Sweden. It develops in white rotted dead birch (Betula spp) and requires sun-exposed sites.

Permaculture is a design system that aims at developing sustainable human settlements and self-maintained agriculture; it may also be used for community planning. The design system of permaculture aims at mimicking a natural ecosystem; this gives the advantage to make use of all the connections and mechanisms that exist in such a system.The purpose of this bachelor thesis was to compile and spread scientific information regarding five different themes within the areas of ecology, environmental science and permaculture. This was achieved through cooperation with the permaculture inspired Ecovillage Suberbyn in southern Gotland. Information about the central parts of a permaculture ecovillage was used as material for a series of signposts that will be located around the ecovillage Suderbyn. The five selected themes were: An overview of permaculture, The forest garden, The pond, Composting and The use of human excrement and urine..

This report is a thesis work for a B.Sc. in Forestry exam at the School for Forest Engineers, SLU. The work was an assignment from Sydved Energy AB. The aim of the work was to compare the operational productivity between two kinds of forwarders for extraction of harvesting residues, one forwarder with a special compression device and one ordinary, slightly modified forwarder. Two sites were studied for each forwarder. The study shows that the annual production was about 11,000 m3 higher for the traditional forwarder. The cost for the traditional forwarder was SEK 0.9 lower per m3.

Syfte: Syftet med studien ?r att unders?ka hur tr?nare inom orientering ser p? motivation, samt hur de upplever att de genom sitt tr?narskap kan p?verka sina idrottares motivation. Metod: Studien har en kvalitativ ansats med semistrukturerade intervjuer. Sju tr?nare fr?n olika orienteringsgymnasier i Sverige deltog. Intervjuerna analyserades tematiskt f?r att identifiera ?terkommande teman i tr?narnas uppfattningar. Resultat: Resultatet visar att tr?nare uppfattar motivation som n?got individuellt och f?r?ndringsbart.

Detta är en intervjustudie gjord med elva pedagoger verksamma i förskolan. Syftet med undersökningen är att ta reda på hur pedagoger ser skogen som en pedagogisk resurs. Resultatet visar att förskolepedagoger ser skogen som en pedagogisk resurs. Man använder sig av skogen i inlärningen av naturkunskap men också i exempelvis svenska och matematik. Pedagogerna såg möjligheter med skogen som till exempel att konkret visa barnen hur de olika årstiderna ser ut.

Bacteria are a problem that occurs naturally in dishwashers when the dish stands there dirty for an extended period of time. To get rid of the unpleasant smell that the bacteria is causing, the most common solution is to run a regular washingcycle which can cause problems for the environmentally-conscious consumers since this causes unnecessary energy waste and emissions of chemicals in the washwater. To solve the problem in a more environmentally-friendly way by directly attacking the bacteria with an appropriate bacterialreductionmethod can therefore be an attractive feature in a dishwasher. There are many different ways to treat surfaces that have been exposed to the bacteria. Some high-profile methods are UV-radiation, microwaves and oxidant (ozone) that all three have had success in reducing bacteria in different contexts.

The red-tailed monkey (Cercopithecus ascanius) is a small, alert and active animal inhabiting forests with dense vegetation and as such hard to observe in its natural habitat. The principal aim of this study was to scrutinize whether the methods, previously used in a behavioural study of the blue monkey (Cercopithecus mitis) can be applied in studies of the red-tailed monkey?s behaviour as well. Additionally, habitat preference and foraging behaviour of the red-tailed monkey were examined. The study was carried out between the 16th and the 22nd of March 2009 in the Sabaringo forest, located on the western border of the Masai Mara National Reserve.

An investigation of the heat impact of laser cutting on the material properties when producing tensile and impact test specimens of different steel types of varying thickness has been performed. The purpose of the thesis project was to provide recommendations regarding how much material that needs to be milled from the laser cut edge before tensile and impact tests. The study has been performed partly by investigating the test specimens by heat camera when the specimens were cut in the laser cutting line and partly by performing hardness tests, investigation by microscopy, and tolerance and roughness measurements and tensile tests of the laser cut material and material produced in the traditional multi operation machine. The results show that the heat affected zone in the thicker materials is greater than previously thought of, and that the currently used recommendation has to be adjusted. The study clearly shows that the thicker the material, the greater the heat affected zone, independently of the steel type, since the thicker material takes longer time to cut.

Approximately 20% of the milk within the udder of a cow is stored in the cistern and immediately available for milk removal, while activation of the milk ejection reflex is required for removing the remaining milk stored in the alveolar compartment. The aim of this literature review is to describe, evaluate and consider implications of the three different suckling activities that the calf displays during a suckling bout. In terms of milking, these phases are represented by pre-stimulation, stimulation during milking and post-stimulation. Pre-stimulation is commonly performed in order to induce the milk ejection reflex, whereby the hormone oxytocin is released and the alveoli in the secretory tissue are contracted. Time requirements regarding pre-stimulation must be considered in relation to lactation stage and milking interval.

This essay is about a deserted medieval habitation called Skyttsie Hage which is located in the south of Sweden in the Scania province where it lies on a moor on the Falsterbopeninsula. Remains of five to six larger buildings have been found here with a surrounding earthwork, although it's not known for sure what kind of habitation they have been part of. Local folklore from the 17:th century states the area as a place where pirates lived, and that this was the reason for it's devastation. Another says that there once stood a breedingfarm belonging to the danish crown. Archaeologists have made several speculations which includes a deer park, a royal estate, an isolated farm or a smaller village.

In the middle of the 19th century was Calluna heath the major nature type in Halland, but the remaining parts today is only 1 500 hectares which is a 99 % decrease of the Calluna heath mainly due to an increase in forest plantations and arable fields. I have made a quantitative study how the Calluna heath of Grönabur & Sandsjöbacka has changed between 1841 and 2005 and why it didn?t disappear in the same manner, as it did in other parts of Halland. The studying of original sources as historical maps, literature and by doing field visits has been significant for the final result. The main reason for the different development of the Calluna heath in the investigation area (69 % decrease), compare to elsewhere in Halland, is the establishment and management of a nature reserve..

Today green tree retention, together with leaving dead wood, is a common practice with the aim to reduce negative impacts on biodiversity and environment due to clear-felling. To better understand whether this conservation practice also makes a long-term difference, it is important to know what happens to these trees after harvest. Few studies have made an assessment of what happens to retention trees over a longer time period. In this study I inventoried retention trees that were left at clear-cuts six, twelve and eighteen years ago. I carried out a re-inventory of 57 retention patches (divided into free-standing tree groups, small swamp forests and edge zones) and free standing dead trees, spread over 25 previous clear-cuts in central Sweden.

In industries today the demand for reading the state of industrial equipment and thus prevent machine breakdown, is increasing. The company HMS Industrial Networks AB has a product on the market, Netbiter EC350 that is used to read sensors and thus find out the condition of industrial equipment. By reporting scanned data to users through a cloud service, users can keep track of their equipment. When developing Netbiter EC350 a slot was made for a Bluetooth module to offer clients a wireless reading in future developments. In this project a prototype was made to show how this Bluetooth communication can be implemented. The goal of the project was to create a Bluetooth communication between a Bluetooth sensor and Netbiter EC350. A user interface was made to allow the user to read sensor values. The result of the project shows how a Bluetooth communication can be implemented to read sensors wireless and therefore it fulfills its purpose and goal.

This master thesis consists of an investigation of the profitability per hectare in privatly owned forest land. The investigation is based on data collected from Skogsstyrelesen, Riksskogstaxeringen and Skogsforsk. During the last twenty years the prices on pulp wood and saw log have substantial decreased, but during the same time the the volumes from final felling have increased and the cost for felling has decreased, this investigation shows how the netprofit per hectARE after final felling has changed between year 1980-2005 This investigation shows that that the netprofit has stayed on a stable level during the years 1985-2005 even though prices pulp wood and saw log decreased. Much indicates that the demand of swedish pulp wood and saw log will continue to be strong or even stronger wich will give increased prices and an higher netprofit after final felling in the future.