The purpose of this report was to investigate to which extent local presence of large herbivore mammals (Alces alces, Cervus elaphus, Capreolus capreolus, Dama dama and Sus scrofa) covaries with small rodents (Myodes glaerolus, Apodemus flavicollis and Apodemus sylvaticus? The hypothesis was that high abundance of wild ungulates would inhibit the density of small forest rodents. The data was collected during field work within FoMA (Environmental Monitoring Assessment)/SLU (Swedish University of Agricultural Science). The Ungulate dropping inventory and rodent trappings, which is the base in this report, where performed 2012 ? 2014 in Gnesta/Nyköping municipalities (G/N) with a relatively high density of wild ungulates and Vetlanda/Växjö municipalities (V/V) with relatively lower wild ungulate density.

This exam paper has been a collaboration between the writers and SYSteam Utvecklingspartner in Huskvarna. The assignment was about finding a need for a mobile application, making a requirement specification document with design documents and parallel to this constructing a prototype. The assignment is summarized in the following questions:? How can companies in the forest industry benefit from mobile information technology?? How can a user centered perspective be used in the process of making the requirement specification document and the design documents?? How do guidelines for usability apply to a mobile application?Three visits to companies in the forest industry were made to find a need for mobile information technology solutions. After a small analysis of the different companies? problems and conditions the decision was to use Tenhults Impregneringsverk AB in the case study.We used the FA/SIM method in our job of finding the organization needs for change and the principles of User Centered Design in the work of constructing a prototype.The result of our work is a requirement specification with design documents and a prototype.

Judged by appearance. This is the conclusion of research made on shopper behavior that revealed that consumers tend to go by their instinct when evaluating vacuum cleaners in a purchasing situation. Many buy the first vacuum cleaner they interact with and few buy pre-planned brands. Almost none even turn the machine on before taking a purchase decision.Electrolux Floor Care Europe has their factory for vacuum cleaners in Hungary. Increased competition from China makes it harder to "only" produce vacuum cleaners with good performance.

This report is a thesis on requests from Sandvik Mining and Construction (SMC) in autumn of 2012. The goal of this work was to study the feasibility of creating and implementing an Equalized preventive maintenance program in SMC maintenance operations and reduce downtime for preventive maintenance (PM). To investigate whether this was possible, the authors studied the current procedures for the PM. The authors have collected and analyzed all relevant information within the maintenance department reporting system as well as through interviews determined whether it is practical to introduce a Equalized PM programs. The authors had also studied the possibilities to entrust part of the maintenance work to the operators of the machine cells.

The purpose of this study is to seek answers to an ongoing problem in the forest sector; why scarifying operators quit their job. Scarification quality is crucial for successful reforestation after clear felling. It is therefore important to keep good operators working in the business. To collect the desirable information interviews were made both with contractors who are working and operators who have stopped working with scarifying. The conclusion one can draw from this report is that the scarifying operator job needs improvement in multiple areas. The former operators are mostly dissatisfied with the stress, low wages and negative physical effects that this work brings..

To regularly remove woody vegetation along the roadside of forest roads is an important part of the road maintenance, since the vegetation binds moisture in the road side and, thus, the removal makes the road drying faster with results in improved bearing capacity. Vegetation removal also makes it easier to upgrade the road by material recycling from the ditch and, moreover, the visibility along the road is maintained.The aim of the study was to evaluate what type of chain flail is the best and most cost-effective for removal of different kind of woody vegetation along forest roadsides.Time studies were made on two chain flails when removing woody vegetation in three different classes; easy-, middle- and heavy shrub removal. The studied flails were one light and rather simple flail named Optimal M160 and a heavier and more advanced flail named Slagkraft H210. The removal was made according to Holmen Skogs? specification and the quality of the cleaning was measured by objective belt inventory.The productivity was higher with the heavy flail within all cleaning classes.

During Spring semester 2011, Linda Engstrom and Malin Heder performed ?Golden Ratio?, a thesis which included 22.5 hp. The thesis followed the syllabus for the Degree Project for degree of Bachelor of Science in Innovation and Design Engineering (MSGC12) which was a unit in the Innovation and Design Engineering program within the Faculty of Technology and Science at Karlstad University.The client was Crem International AB, a company located in Åmotfors that develops the design, manufactures and markets coffee machines. The supervisor at the company has been Peter Larsson and supervisor at Karlstad University has been Monica Jakobsson. Examiner for the thesis has been Professor Fredrik Thuvander at the Faculty of Technology and Science at Karlstad University.Crem International AB controls a patent, representing a new technology to streamline and minimize use of energy during the coffee preparation and results in a good coffee quality.

This Master of Science thesis was completed at the Department of Machine Design at the Royal Instituteof Technology in Stockholm in collaboration with Lund Faculty of Engineering, Luleå University ofTechnology and Stanford University. At Stanford University a global product development project wasrealized as part of the course ME310. The project was initiated by the American company ImmerseGlobal whose vision was to develop a new type of Atmospheric Water Generators, a machine that absorbsthe moisture in the air and via a water system transforms it to pure drinking water. The project was partlyfinanced by the Product Innovation Engineering program, a Swedish research and development programfor increased innovation capability in organizations.In parallel with the global project in the ME310 course the product development process was studied inorder to compare it with a product development course at the Royal Institute of Technology, IPU. Thetwo courses are similar to each other in several aspects.

Headwater streams are affected by anthropogenic impacts at multiple scales. One aspect of human impact is sediment transport associated to the abundance of stream structures as large woody debris and the composition of the riparian zone from forest to agricultural landscapes. Riparian buffer zones and stream structures like dead wood are considered as generally important structures for protection against an increasing amount of sediment particles in the water. Hence, in this study these structures were quantified in thirty different stream segments on land and in the water. To measure the transport of sediment Whitlock-Vibert boxes were used in three different types of landscapes; forest, transition and fields. The boxes were left in the stream segments for three months, the taken up and dried and weighed. The results showed that the transition-land in Frösvidalsån had the highest sediment transport. The second highest transport of sediment was in Blackstaån at the fields.

To be a part of the future we have to make a profit, one way to improve the profit margin is by reducing the fixed costs. This paper discusses the financial results of equipment cooperatives in crop production. Through a case study of three farms in Södermanland, we have an example of how it can look today and how it could look tomorrow. The three farms are crop-producing farms with slightly different orientation. Jursta Gård, 155 hectares, and Djursnäs Säteri, 215 hectares, have grains crop and oilseed crops as the main crops, and Nibble Gård, 340 hectares, mostly have pasturelands and some grain crops.

During whole-tree harvesting, there is a risk that the soil will become impoverished of nutrients. To prevent this, nutrients are returned to the harvested site as wood ash. This action also reduces the risk of soil acidification. Nevertheless, the ash does not result in any increase of tree growth if it is added on mineral soils, which is where the measure is most commonly used in Sweden. Due to the lack of growth response, the interest from landowners is small, which is why ash amendment today is not done enough to compensate for the need.

During Spring semester 2011, Linda Engstrom and Malin Heder performed ?Golden Ratio?, a thesis which included 22.5 hp. The thesis followed the syllabus for the Degree Project for degree of Bachelor of Science in Innovation and Design Engineering (MSGC12) which was a unit in the Innovation and Design Engineering program within the Faculty of Technology and Science at Karlstad University.The client was Crem International AB, a company located in Åmotfors that develops the design, manufactures and markets coffee machines. The supervisor at the company has been Peter Larsson and supervisor at Karlstad University has been Monica Jakobsson. Examiner for the thesis has been Professor Fredrik Thuvander at the Faculty of Technology and Science at Karlstad University.Crem International AB controls a patent, representing a new technology to streamline and minimize use of energy during the coffee preparation and results in a good coffee quality.

Construction and maintenance of forest truck roads are a necessary element of industrial forestry. Payment for contracting services in this context can be done according to a number of payment models. This study will focus on the methods and consequences associated with a change of Holmen Skog?s payment model from per hour to per metric ton for ballast hauling. The aim of this study is to improve the economic efficiency of Holmen Skog?s ballast hauling in construction and maintenance of forest truck roads. This is done by formulating and evaluating a proposal for a payment model based on crowns per ton.

Plant survival, plant damage and height growth were studied in nine wild cherry (Prunus avium L.) plantations in southern Sweden established between 2000 and 2002. All stands were located to the county of Småland. The survey was conducted during May and June in 2007. During the survey the height, diameter and quality of the cherry trees were recorded. In one stand, red ? berried Elder (Sambucus racemosa L.) was a dominant species.

The introduced lodgepole pine (Pinus contorta) occupies more than 650 000 hectares in Sweden. There are some differences between lodgepole pine and Scots pine (Pinus sylvestris) forests which could affect bird assemblages, for example differences in canopy density and ground vegetation. Birds were surveyed in 14 localities in northern Sweden, each characterized by one middle-aged stand of lodgepole pine next to a stand of Scots pine. The two paired stands in each locality were planted by the forestry company SCA at the same time and in similar environment to evaluate the potential of lodgepole pine in Sweden. In those 14 localities, one to three point count stations were established in both the lodgepole pine and the Scots pine stand, depending on the size of the area.