Over 90% of forestry work is carried out today by contractors, thereforeclear agreements between the client and the contractor it is of utmostimportance. Contract Packages for work within the forest sector (APSE) is acollection contract templates that the industry jointly developed for thispurpose. The purpose of this thesis is to examine how forest contractors doto keep themselves updated of the current laws and government regulations,which channels are available to accomplish this and what possible obstaclesmay occur. 20 interviews were conducted with contractors engaged inlogging. The results show, among other things, the availability of and whichchannels most contractors use out of which aggravating circumstances existand how strong they are perceived and what is expected of the client in thisregard..

Over 90% of forestry work is carried out today by contractors, thereforeclear agreements between the client and the contractor it is of utmostimportance. Contract Packages for work within the forest sector (APSE) is acollection contract templates that the industry jointly developed for thispurpose. The purpose of this thesis is to examine how forest contractors doto keep themselves updated of the current laws and government regulations,which channels are available to accomplish this and what possible obstaclesmay occur. 20 interviews were conducted with contractors engaged inlogging. The results show, among other things, the availability of and whichchannels most contractors use out of which aggravating circumstances existand how strong they are perceived and what is expected of the client in thisregard..

Young stands in urban forests often lack a shrub layer, though shrubs play an important structural and biological role in forests. All layers interact with one another to form a multilayered stand, in which shrubs have a vital role.In this diploma thesis, theoretical models for forest dynamics are compared with four reference stands to detect factors, and principals for introduction of shrubs in young stands. In these stands four different ways of introduction were found. In one trees and shrubs were planted together at the same time. Shrubs spontaneous spread under a canopy of mature forest, in another.

The main aim of this study was to investigate and compare different methods for the extraction of forest fuel from environments close to an archipelago. The study was based on relevant literature and published reports as well as personal communications. Forestry has traditionally been characterized by intense efforts to rationalize and mechanize the cutting technique used for timber and pulpwood. In line with the increasing importance of forestry, more concentrated efforts can be expected in the area of techniques and methods, especially for the above-mentioned product lines. In Sweden, forestry is of major importance and the Swedish economy and standard of living have mainly been created based on the revenues generated from it. Thus, it is vital that Swedish forests are harvested in an efficient and responsible manner. The demand for biofuel is growing and today accounts for 15% of total Swedish energy production, a share that will probably increase. This study is based on three research questions, which are described under the heading of Aim. The results reveal that the most profitable method for handling forest fuel is the traditional one, which is also the most commonly used method in southern Sweden, namely the stockpiling of logs in a clearing by means of forwarders followed by splintering at the place from where they will be distributed. Today, the high cost of barge transport required for the extraction of forest fuel in an archipelago environment renders such operations unprofitable.

During the last years commercial Wind Power Turbines (WPT) has become larger regardingto the generator sizes and hub heights. Available hub heights around 100 meters is nowcommon, which has led to profitability for WPT located in forests where there normally are tolow wind speeds. The current knowledgement regarding turbulence and the variation in thewind profile for the outcome of the power production for the WPT in forests is limited.In this Master of Science thesis an investigation concerning forest located wind power plantshas been made. The purpose has been to investigate if plants located in forest perform lesscompared to wind power turbines located at more common locations.The analyses are based on statically material for determining the availability,production/generator size, production/hub height, production/swept area and how thetopography affect the production results.The analyses show that the variation in production result for WPT located in forest comparedto turbines located at other locations is small. The availability is high and the productionresults are good..

The saw blade producer, Håkansson Sågblad AB, patented in the U.S. a new blade profiledesigned specially to cut fish and meat. The most important advantage of that blade is that its teethare not set, therefore the material lost when cutting is really smaller. The special geometry of thatprofile made that nobody had found a proper way to produce it before.The goal of the outlined work is to develop a machine to produce these new blades in afeasible way.The research approach of the project can roughly be divided into three phases:1.- Invention and development of a proper distribution of blades to produce a big amount ofthem at the same time.2.- Research of the best production process to produce the blades.3.- Main design of the machine to produce the blades.In the Thesis these three points are carefully developed and studied in the form of the startpoint of a really bigger project. Some tests had been done in order to prove all the analytical ideasand the results obtained had been satisfactory enough to give Håkansson the start point of a bigbusiness.

This final thesis is performed on commission of Torsby forestry administration, Stora Enso Skog. Stora Enso Skog is one of the major forestry companies of Sweden. The main business area is located in and around the region of Bergslagen. During the last decade the practice of forest management has rapidly changed due to a new forest legislation. The new law has resulted in that the production goal is equal to the environmental goal within forestry.

In the current situation is the straight tube cutter, that provides Luvata?s line of large recoolers with copper tubes, manually operated. To prevent damages and facilitate mounting the tubes must be properly arranged when they leave the machine. This report aims to investigate and present an automated solution where the operator does not need to participate in the process. A number of theories have been drawn up and tests have been done.

This report was written as a result of a Bachelor Degree Project at the School of Technology and Society at University of Skövde spring 2007, together with Jede AB in Mariestad. The report covers the development of a door to a coffee vending machine that is under construction, and will in a chronological order describe the project from ideas to final product.The project started with a rather extensive feasibility study that thru market research and user tests sorted out the opinions of potential customers, concerning today?s available assortment. Technical areas concerning materials and manufacturing methods were also scrutinized for the consideration of the possibilities of a future production.The next step was to constructively generate ideas and thoughts that later on could grow to be potential solutions. After several weeks of hard work and pieces of good advice and recommendations from the assigner, four comprehensive concepts were built up.

A vehicle that carries a person sitting in a wheelchair has been rebuilt. The original vehicle was provided with a petrol engine, hydrostatic drive and a mechanical steering rod, making it noisy and hard to maneuver. The purpose with this project was to convert the vehicle to make it more environmental and easier to drive.A new design has been proposed where an electrical drive has replaced the noisy combustion engine and an electrical motor with joystick control has replaced the manual steering.The project was divided into two parts. One mechanical part where the construction of the drive and steering were to be decided. The other part involved programming the microprocessor and implementation of all the necessary electrical for the control system of the vehicle.

Taking a qualitative approach, this research investigates different theories and methods for creating parks that people will cherish and visit during their daily life. It also takes on the task to understand how principles of developing recreational values in a small forest is affected by the addition of a new element to the landscape, i.e. a major highway. Data was collected through the combination of focused literature review and study trips. This provided a framework which in turn was applied to the subject of the study, i.e.

Fungi are everywhere around us and recently, there has been an increased interest in their role and importance in the forest. The fungi have several strategies to acquire energy and nutrition; one example is a mutual symbiosis with trees and plants - another being dissolving organic materials. Attempts have been made to better understand the circulation of nutrition in coniferous forests, and how fungi cooperate. Trees and plants have adapted with mycorrhizae and are now interdependent which is important to consider in forestry. A great number of fungi depend on dead wood and old trees to set fruiting bodies and spread further. These fungi also create environments for other species, such as birds and insects. The vegetation of a forest is determined by a series of factors; tree species, how old the forest is, soil type, as well as the ability of the fungal spores to spread and establish. Furthermore, in determining vegetation, the fungi?s ability to compete in the soil matters. These factors are nearly unexplored. Researching fungi knowledge and interest, a survey was distributed to five groups of people. The groups included forest owners, high school teachers, high school students, senior citizens, and a fifth group - ?o he ? - consisting of people of mixed ages and backgrounds.

At the Division of Electricity at Uppsala University there is an experimental rig forhydroelectric generators. The experimental rig?s vital part is a 12-pole synchronousmachine, whose electrical characterizing parameters (resistances, inductances andtime constants) are unknown. The aim of this thesis is to characterize the machine inits current state by perform a Standstill Frequency Response (SSFR) test. From theanalysis of the measurement data, which is a part of the test, a set of basic parametershave been received.

The purpose of this report is to investigate and compare the difference between stand-thinning machines and strip-road thinning machines, and how they affect the stand on behalf of future growth, theoretical economic result, wind impact, snow pressure and density of stand. The investigation is regarding the first commercial thinning of pine stands, after pre-commercial thinning that was well conducted. The investigation area was located near Katrineholm, Sweden. The measurements that were measured were strength of thinning and amounts of wind throws, snow-breaks and hauling damages. The results that emerged, was that thinning with strip-road machines had a significantly higher strength of thinning over all, as compared with the stand- thinning machines (45 percent versus 30 percent). Comparisons between wind-throws, snow-breaks and hauling damages of the stand could not establish any significant differences between the two methods that were investigated. Conclusions, over all, were that if forest owners want to have more timber volume left for second thinning and final cut of the stand, the forest owners should choose the method with stand-thinning machines. From the point of view of gentle treatment of the stand and ground damages the choice should be the same. However, the method with strip-road thinning machines is the most common and accessible method in Sweden. Most likely it is the most economical way to manage the stand for forest owners in present time. If the method with stand-thinning machines is becoming more common in Sweden, it is suggested for forest owners to consider the stand-thinning method as a candidate for treatment due to economic aspects..

Throughout its wide distribution in the northern hemisphere, the golden eagle occurs in a diverse range of environments, e.g., mountainous, forest and open areas. The literature on juvenile golden eagles is limited, and this study provides further knowledge on habitat use and ranging behaviour during the post-fledging period in boreal Sweden. A total of 14 golden eagle juveniles were tagged with GPS transmitters during 2010 and 2011, and nine could be followed during the entire post-fledging period from fledging until migration. The juveniles fledged at the end of July and beginning of August and initiated migration during October and beginning of November. The length of the post-fledging period, until migration started, ranged from 49 to 97 days. During this period, the juveniles? distance from their natal nest and their GPS height increased with time as their flying abilities developed.