This paper is the result of a case study conducted at Uppåkra Mekaniska AB during the spring of 2006. The task that was presented by Uppåkra was to develop a basis for a decision for the planning activities at the company, so that in the future they can create lot-sizes which are based upon a total cost perspective. Total cost in regards to lot-sizing is defined as the sum of the administrative reordering costs and warehousing cost per stock keeping unit.To collect data a series of interviews and observations were conducted. This data was then used during the lot-sizing simulation and analysis. The 15 units that the simulation was conducted on were grouped into three item classes depending how many different machine setups they required during the production process.

Many participants in the Swedish timber market procure raw material from private forest owners. They often also offer forest services to ensure reforestation after final felling. Selling silviculture services can be a part of creating a long term relationship with the landowner for future timber purchases. The Swedish Forest Agency monitors forest rejuvenation results in the entire country. In the latest survey (2006 - 2008) the proportion of approved regeneration area was 78%.

This study was an assignment for the company Holmen which is located in the region of Örnsköldsvik, Sweden. The study was focusing on the responsibilities of a forestry planner during the planning season. The study was investigating about how much time the planner spent in the office, in the car and out in the forest. Any other issues that would cause delays were also identified. To be more effective and to increase the number of objects to a district bank, a better preparation in the planning stage (for thinning?s or clear cuts) is needed as well as faster transition on to the next area.

Det finns idag ett stort behov av att kunna klassificera stora mängder data på ett effektivt sätt. Prediktiv modellering är ett område inom data mining där prediktioner kan utföras baserat på tidigare erfarenheter. Dessa prediktioner presenteras sedan i en modell. Avvägningen mellan tolkningsbarhet och träffsäkerhet är ett begrepp som beskriver hur träffsäkra modeller ofta är ogenomskinliga, medan genomskinliga modeller ofta har lägre träffsäkerhet. Detta är ett problem eftersom det finns ett behov av modeller som är både träffsäkra och tolkningsbara.I denna studie visas hur man kan gå till väga för att skapa en modell som har en träffsäkerhet i klass med en ogenomskinlig modell, men samtidigt har en högre tolkningsbarhet.

The aim of the "Green forest management plans" is to help forest owners to reach the environmental goal of the forestry act. But are they able to do that? Is it possible to plan preservation of species on single estates? How do single-estate-plans differ from a landscape analysis and how can the landscape approach be used in operative planning? This work was initiated to give an answer to these questions. This study was made in a landscape of 4200 ha in Östergötland county, south-eastern Sweden. A lanscape analysis was made and then compared to the Green forest management plans in the same area. The nature conservation areas (areas that were set aside to be managed with environmenatl goals) differed quite a lot between the two alternatives.

The reduction of coarse, dead wood is considered to be the biggest threat to flora and faunain boreal forests. Extensive harvest of logging residues would increase this reduction evenmore. However, the role of dead wood created at final felling for boreal, epixylic species isstill largely unclear. It is therefore of interest to examine whether epixylic species inhabit thedead wood in young, boreal stands, especially species considered to be confined to forests inlate successional stages.The aim of this study was to investigate whether forest-interior species in fact can inhabitearly-successional forests arisen after logging. The study was conducted in young standsbordering dead wood rich woodland key habitats.

The story of the forest - A folded textile wall for flexible rooms in public spacesIn the story of the forest the dragonfly is spinning yarn shiny as the sun. In the story of the forest almost everything can happen and almost everything is also happen there.Inspiration from Lennart HellsingThe goal in this exam work was to create a calm, playful space for children in public spaces. A place where children can hide and relax without being disrupted by the surrounding, a place where their imagination can grow and take place. The goal was also to make a flexible space for public spaces that could be used in different ways. Today many libraries want to be more than a library, they will work as a meeting place and you can find several activities to join in.

When a decision is to be made on what long term strategic forest management plan to use, consideration must often be taken to multiple objectives. Such decisions are very complex and a promising approach to handle them is by Multiple Criteria Decision Analyses (MCDA). The study is based on the problem that the MCDA that have been implemented into forest management planning have only had capacity to compare and evaluate a limited number of management plans; which means that there is a risk the most suitable plan is missed. The aim with this study was to test the applicability of combining the MCDA tools: the Technique for Order Preference by Similarity to Ideal Solution (TOPSIS) and the Analytic Hierarchy Process (AHP) for including consideration to multi-objectives into strategic forest management planning. The study was based on the process of creating and selecting a management plan, using Heureka PlanWise, suitable for all the major objectives found in the forest holdings of a municipality in northern Sweden.

As the final course in the education ?University Diploma Programme for Process Operators? there is a thesis in cooperation with a company required.This thesis is about operator maintenance and 5S made at Metsä Board in Husum.In this report you can read my opinions and conclusions based on literature studies and the interviews that have been made with the staff at PM6 (the paper machine).I chose to focus on the theory of lean, 5S and operator maintenance because it covers the area of this thesis.The operators shall do their rounds to make sure that the equipment works fine. They shall also write down things that they notice in a checklist. This is not done as it should be and the question is: can this be solved by using 5S?My conclusion of this thesis are:Better review of the task so that everyone is involved.

This is a study on winter groups, ?siida?, of semi-domesticated mountain-migrating reindeers that move to lichen pastures in the lowland boreal forests during winter. The aim of the study was to determine reindeer habitat use in their winter ranges in a managed forest landscape. The reindeers use of three different types of forests was determined, 1) 100-130 year old, 2) 20-40 year old forest and 3) clear-cut areas. All sites were dominated by Scots pine, Pinus sylvestris, and had the same types of ground vegetation.

This report presents a thesis project conducted by two students at Mälardalens högskola. The project covers 15 points in industrial design and was conducted during April to June 2014. The principal of the thesis works at Plastic Produkter. The assignment was to develop equipment for an effective way to dose, mix silicon, fill a special designed plastic bag and then seal it. The bag is then formed into a breast model.When a customer for various reasons decides to do a breast augmentation or a breast reconstruction, there may be doubt or uncertainty about the result.

FSC (Forest Stewardship Council) is the major form of certification system in Swedish forestry today and its more than 11 million hectares are covering almost half of the total productive forest area in the country. Its regulations prescribe that at least 10 wind firm trees should be left behind after every clear cutting operation. This study have taken place on 30 recently clearcut objects in Bergslagen, Sweden, were an inventory of the standing stock have been made. The research shows that, with 90 % security, the retained trees together contain 9-13 m3sk per hectare. Pine is the dominant tree and it covers more than half the numbers of retained trees and its volume cover 65 % of the retained trees total volume. Spruce is on second place with 30 % of the retained trees, but only 21 % of the standing stock.

AbstractThis bachelor thesis has been assigned by the company ACG Nyström, Borås. ACG Nyström is working in cooperation with a Swiss company named Jentschmann AG. Jentschmann is a manufacturer of ultra sonic welding machines which ACG Nyström is marketing in Scandinavia and the Baltic States. On behalf of Jentschmann AG the company has the aim to introduce the ultra sonic welding technique to new companies.The aim of this thesis is to compare traditional sewing machines with ultra sonic welding machines within two textile areas, protective clothing and outdoor living.Two investigative questions have been formulated for this purpose: what are the differences between a sewing machine and an ultra sonic welding machine? Is it possible to replace the sewing technology with ultra sonic welding? These stand as guidance for this paper.To gather knowledge interviews, literature studies, and tests on two different ultra sonic welding machines were performed.

The purpose of this paper has been to find out what motives buyers of forest property has for there purchasse, what competence they have in economics and forestry, and what analysis they had done before the purchase. The study is based on interviews with nine different buyers from two geographical areas, five from Hälsingland and four from Småland/Skåne. A forest property is a property where the value to 100 % consist of forest. A part from the interviews every purhase has been analysed in comparison to an estimation of the yield value. The theoretical yield value was estimated with a computer programme.

Restrictions in nature conservations are increasing the influence of forest management. Nobel broadleaved forests are more influenced than other forests, because they are considered to be more valuable than other forest types in Skåne. There has been a lack of knowledge about the amount that is set-aside for nature conservation and what types of forest that is concerned. These are the main questions to be answered in this thesis. Moreover has the timber quality been compared between set-aside and non-set-aside areas since it affect the financial conditions for the forestry in nobel broadleved forests. The last asked question deals with the financial consequences of set-aside.