Ditch cleaning is increasingly important in Swedish forestry. This study compare different concepts concerning machinery, namely two general-purpose excavators of different sizes, 8 tonnes and 15 tonnes, versus a dedicated machine constructed solely to deal with ditch-cleaning. The machines were tested on rough as well as on gentle terrain and on open terrain as well as in young stands in connection with thinning. The conclusions were that the excavators are more versatile and have greater capacity than the dedicated machine, while the latter excels in quality of work. Interestingly, there was no significant difference in performance between the both excavators..

A common goal in practical forest management is to maximize the yield, measured in economical terms. When a forest stand is thinned a so called inoptimality loss can arise due to non-optimal decisions. This means that the selected management schedule results in a lower net present value than the optimal one which lowers the profitability for the forest owner. Holmen Skog uses the term tract which means an aggregation of stands made before a management action. A tract should be delineated in different tract parts in connection with pre-thinning planning if there is different bearing capacity within the tract, different thinning grades should be used or if the tract contains a weaker part that should not be thinned.

The basis of road investments is to minimize the transportation cost. The forest industry wants roundwood to be available during the whole year. One way of determine which road to invest in is to do a cost/benefit calculation. SCA Forest lacks a uniform approach to determine the utility of a road investment. The goal of this report is to describe how the organization works today and find areas of improvement. The data collection was done through interviews.

This study was conducted on a property with a thinning machine team. The purpose was to investigate in which machine, the harvester or the forwarder, that caused most damage to the trees in six different stands. Different factors, related to the damage frequency in the stands, were checked out. For example: basal area per hectare, thinning strength, tree diameter and the rate of production. The harvester drivers were also interviewed about how, when and why stem damages occur and how to minimize them. The study stated that 4.3 percent of the trees were damaged. Out of these 88 percent was caused by the harvester and the rest, 12 percent, by the forwarder..

To effectively manage a forest resource for both economic and other values good planning is required. The problem is complex since you want to know which forest to cut and when. Often a hierarchical planning structure is applied, including strategic (long-term), tactical, (medium-term) and operational level. Today SCA Forest is one of few forestry companies in the northern Sweden with an integrated forest wood supply and industry. The goals of the company are to supply their own industries with wood and to manage the resources of the forest through a long-term perspective with satisfactory profitability.

It has been even more important in the forest sector in recent years to look at the whole chain from suppliers to end users, to improve operations and improve performance and the profits of the company. The research and development have been concentrated on the buyer?s market and product development, probably because this research has capability to give an increased cash flow. But to obtain stability and continuity in the production and selling units, the suppliers should also be investigated. The aim of this thesis is to study a one company's existing suppliers of roundwood and investigate the differences and attitudes they have about the company offerings.

The forest property Fagerdal 2:10 was donated to the Swedish University of Agriculture in 1995 by Erik Rönnberg. The dominating species is Norwegian spruce (Picea Abies) and the average age is high due to selective cutting. The aim of this study has been to analyze how the forest on the property should be managed and demonstrate how a better estimated forest data affects the future management. The impact of the management on the carbon stock of the property was also examined. A forestry plan established in 2009 by Skogssällskapet was used as a basis for the analyses.

I made this examination essay to investigate the possibilities and problems with machinery import. The rules intend to loaders and agriculture machines are still pretty flexible. It is today rather simple to make a registration or inspect those machines. There are still some practical problems to be aware of. It is very important to have the right contacts abroad, it is not always that you have time or moment to inspect the machines before purchase. In that case you have to trust your contact or partner about condition, equipment or working hours of the machine. Another important thing is payment before delivery: There is a huge risk that you do not get the machines that you paid for. If problems come up, you need to know the laws, your rights and your duties. A Swedish company does not pay any value-added taxes when it buys from another member of the European union. On the other hand must the machine be sold included value-added tax, if the buyer is a Swedish company.

When the storm Gudrun hit Sweden on the 8th and 9th of January, many recreational forests in southern Sweden blew down. For this reason there is a demand for new regeneration methods as to how these storm-felled areas should be regenerated and with what species. In this study the forest is divided into three areas: production, recreation/production and recreation. The first area is a forest with production as main goal and these kinds of forests are located a bit from the city. The second type ? recreation/production forest ? has two equal goals: production and recreation, and is located close to the city.

Background: The hurricane in the south of Sweden in January 2005 was the worst storm in Sweden for the last hundred years. The storm named Gudrun has blown down forest that according to estimation is corresponding to one year of cutting down in the entire country.Purpose: The purpose of this thesis is to describe how credit granters act when facing falling forest real estate mortgage and describe if they will make considerations due to the storm in the south of Sweden 2005.Method: With help of a qualitative method, we investigated how the credit granters act when facing falling forest real estate mortgage. Interviews were obtained with three credit granters, SEB, Landshypotek and FöreningsSparbanken in the county of Jönköping and Kronoberg.Conclusion: The conclusion is based upon the empirical study, the analysis and our own reflections and it shows that the credit granters do not change their policy concerning credit granting to forest real estate properties. The policy of the credit granters has proven to be valid even in this extreme situation..

The purpose of this study was to examine how small-scale private forest ownersmake decisions regarding pre-commercial thinning. In 2015 it is ten years agosince the storm Gudrun hit the southern parts of Sweden and now large areas arein need of pre-commercial thinning. This study is built upon qualitativeinterviews with seven small-scale private forest owners with forest properties inthe county Kronoberg. The respondents were chosen by the modelSKOGSÄGARPROFILENTM (forest owner profile).The results of the interviews showed that five categories: ownership, the stormGudrun´s impact, silviculture, forestry contacts and driving force was important.How will their purpose and aim affect the pre-commercial thinning? Personalinterests, and expectations of the next generation to take over, are purposes thisstudy has found.

Älvdalens Savings Forest was formed in the late 1800's. During this time the country was conducting the first major land reform in Sweden, namely the redistribution of arable land through government action. In Älvdalen people saw an opportunity to form Savings Forest, that is jointly owned forests, where everyone would get part of the proceeds. The yield in the first place would cover were costs to manage and monitor the forest and to the measures to ensure regrowth and improve the forests. You could also use the proceeds to develop the area and make it easier for the population to manage their forest. In early summer, a survey was sent to all the members of Älvdalens Savings Forest.

Holmen Skog is currently using a GPS-program called TraktInfo, originally developed within the company. They are now planning to switch to a new GPSprogram or allowing the contractors to buy other programs available from the logging equipment manufacturers. To be able to offer this flexibility, Holmen Skog needs to obtain information about the features offered by the different manufacturers in their specific programs, and also when the manufacturers are planning to start selling programs adapted to the new standard called StanFord2010. According to the study, the manufacturers are hesitant to StanFord2010 and there has also been a lack of clear signals from the customers and clients about what kind of different new features to include in the programs. The feature most frequently used by Forest machine operators today is the option to keep record of the harvester?s path by creating a ?log plot?. This feature was not used to its full potential however, since only one out of eight of the forwarders included in the study had computers that were compatible with the harvester?s computer.

This report is produced with Nätraälven forest owner association. This forest owner association has been going through some changes the last years and therefore wanted to investigate what the members thought about the development. The main purpose of the study was to gain knowledge about the attitude of the members. The study was made with a questionnaire that was purposed to investigate the member?s opinion on their own cultivation and the view on Nätraälven as an organization. The questionnaire was sent to 110 members.

This report deals with an exam report written by Olle Hjalmarsson and Thomas Likar, students at Högskolan i Halmstad. The project was carried out for Haldex Traction AB in Landskrona whose business consist of manufacturing automatic all wheel drive systems (AWD-system). These systems consist of a plate clutch which activates all four wheels of a 4-wheel driven vehicle. An important component in these clutches is the accumulator which basically consists of a piston under the load of a spring which creates an oil pressure with the help of an electric motor used for actuating the clutch.At Haldex difficulties has been experienced regarding the assembly of the accumulator parts due to the small tolerances between the piston and the hole of the accumulator in the cast aluminium housing. Attempts have been made to assemble the parts in existing robot cells.