Ocean Thermal Energy Conversion, OTEC, a technology using the temperature difference between cold deep seawater and warm surface water, can extract the work in the form of electricity. OTEC gives also synergies of drinkable fresh water. The temperature difference has an impact on the efficiency of the technology, which means that the feasibility of OTEC is geographically limited. The project intends to explore the possibility of replacing the atoll Tarawa?s present electricity generation with an OTEC plant and to explore synergies. In the present situation all of Tarawa?s electricity is generated by fossil fuels.

The forests of Sweden are constantly changing. Map studies indicate that the amount of deciduous trees in Sweden has decreased in recent years in favor of the coniferous trees. The National Forest Inventory has since the early 1920s monitored the Swedish forests and in recent years has made the old data digitally available. In the present project, we have investigated how the numbers of stems in different diameter classes have changed for birch and other deciduous trees. The inventory was conducted in the same manner as in the first forest inventory.

This study is done together with Sydved AB in the summer of 2012. The purpose of the study is to analyse how different quantity of assortments influence the production for forwarders and harvesters with multiple tree handling aggregate in thinning, by different tree volumes. To make this analyse a time study was performed where three entrepreneurs work has been analysed. Beside the analyse, of different quantity of assortments, has also been analysed how the tree volume and a forest fuel assortment effect the production. The result of this study shows that the quantities of assortments have a significant meaning for the production. The biggest differences are most distinct between one and three assortments in the smaller tree volumes where production goes down if the quantity of assortments increase.

This study is made on assignment by the local board of forestry in Skåne, Blekinge and Halland. The change of the forest law 1994 brought a new type of management plan. A more active planning was introduced in order to equate the environment goal with the production goal. The purpose with this study is to give a better picture of how planning for nature conservation in production forest is made and to develop support for selection of silviculture methods for stands with combined goals. With combined goals means production forestry with a reinforced consideration to both nature and culture, called PF-classified stands. This was done by: ? Describing silviculture models from the literature that are possible to use for stands with combined goals. ? Describing silviculture models that is used in practice in stands with combined goals. ? Describing how the classification of stands with combined goals is used. Which means, were in the terrain, with which frequency and in which type of forest PF-classification is used. ? Comparing differences and similarities of theoretical and practical used models. The study was done partly as a literature study and partly as an interview study of forest planners.

Booth for operational planning of harvesting and for long term planning, data is today collected manually. Intensive objective field inventories are usually too expensive. To enhance optimisation of timber flow from forest to industry Moore efficient methods for measuring tree stems of standing trees are needed. The performance of terrestrial laser scanners have improved and these could possibly be used within forestry in the future. The objective of this study was to validate how a terrestrial laser scanner could be used to measure stem diameter, and to test how the errors depend on distance from the scanner and tree species. Two plots (one pine and one spruce) were used for this study.

This thesis is based on a market survey sent to the passive members of Södra skogsägarna within the scope of practice of Vimmerby. A member of Södra skogsägarna is considered passive if the member not has delivered timber to the association during the past five years. The purpose of this thesis was to obtain as much information as possible about the forest owners, to be able to interpret why the member did not choose to deliver their timber to the association. The survey was worked out in close collaboration with Södra skogsägarna to answer this question. The responses indicate that economic returns are important to the individual landowner. The price of timber is most important in a timber business and the majority of forest owners want to have a personal meeting if you can choose how you wish to be contacted by the inspector.

Since the Bruntlandreport was published 1987, companies have shown their environmental commitment through an environmental account. Companies started these accounts because their rivals started having them and today most large companies have a environmental account or sustainable development report. The information given by the companies have been seen as slanted, and others see it only as a part of the image production for the companies. There have been several investigations of the stakeholders of environmental reports and it is not clear who is the primary stakeholder, in other words who actually reads them. All different stakeholders have different views of what an environmental account should encompass.

This thesis was carried out to give some background information to a report of SLU (Swedish University of Agricultural Sciences) for the Swedish National Rail Administration (Banverket). The requested information was to provide basic data for an environmental impact assessment of the construction of the tunnel through Hallandsås. The aim with the thesis work was to discuss and quantify the leaching of nitrate and the emission of nitrous oxide from the soil at the groundwater level established through the tunnel project. The nitrogen related processes that could be affected were described and discussed. The different areas where a decreased groundwater level can cause changes in the nitrogen processes are the wet and moist areas.

Bergvik Skog is one of the leading forest companies in Sweden who use airborne laser scanning for forestry information. They utilize laser data retrieved by the Swedish National Land Survey to describe the forest holdings and facilitate planning for thinning and final felling operations. However, the possibility to identify stands with clearing needs by using laser scanning data has not been tested in a large scale. The data used in the current study are field data from The Swedish National Forest Inventory in combination with laser data from the Swedish National Land Survey acquired in 2009. The collected data is used to find one or several laser variables that best describe the relationship of the field measured samples with clearing needs.

Femsjö is a small parish situated in Hylte municipality, Växjö diocese. The parish has a total area of 8230 ha of which 5000 ha are covered with forest. There have not been any large industries in the parish offering work opportunities for the inhabitants, so they have had to generate income from their land and the forest. Instead of going to the bank to get a bank loan the people of Femsjö parish went out in to the forest and harvested trees for timber and extra cash revenue. Production of pine tar and potash were two other ways that the residents of Femsjö parish could earn extra money for the household in order to keep starvation away.

SCA is the largest private owned forest owner in Sweden, with an ownership of 2 million hectares of productive forestland. To manage the planning of such large areas and to fit the traditional organization structure of a Swedish forest company, the planning approach is subdivided into three stages; strategic, tactical and operational. The strategic part, based on a statistic sample of stands, returns a harvest level estimate which should then be implemented at actual sites in the tactical part. This procedure can lead to incompatible solutions as the strategic solution is not necessarily possible to translate into actual sites in the tactical plan. The geographic aspect is important in tactical planning due to the large costs for moving equipment and maintenance of a large number of forest roads.

BackgroundThis paper is based on an issue raised by the organization Energigas Sverige, which together with the Ministry of Finance has posed the question about the fiscal impact of an increase in biogas production. Since the fiscal effects of an increased biogas production are both positive and negative, due to reduced use of fossil fuels, we want to investigate this further.PurposeThe purpose is to describe and explain the obtained fiscal impacts of an increased biogas production and based on our problem: ?What are the obtained fiscal effects caused by an increase in biogas production?? we could see the following fiscal effects: positive impact on employment, increased revenues of social security contributions and income taxes, reduced unemployment costs and reduced tax revenues on fossil fuels. These effects are summarized in a negative tax revenue of 2,6 billion SEK. Along the summarized negative effect we also accepted one of the two prepared hypotheses, which stated that an increase in biogas production leads to a negative fiscal impact. Design/Methodology/ApproachWe have chosen to work from an Anglo-Saxon scientific tradition and furthermore, we have a positivistic approach when we want to explain the relationship between cause and effect of an increase in biogas production and the following fiscal impacts.

A couple of hundred years ago half of the earth?s surface was covered by forest. Today, only half remains and every year an area the size of Nepal is disappearing. Deforestation, together with the burning of fossil fuels, is also one of the reasons for the increasing greenhouse effect. Another relatively unknown problem for the world?s forests is the trade with illegally harvested timber.

The activities of beavers in forested landscapes affect both ecological and economical values. The creation of the dynamic wetland mosaic associated to beaver activities can even improve the quality of water and have been documented as an important landscape engineer affecting the environment for many species. The local office of Sveaskog in Skinnskatteberg is responsible for the management of large areas of the forests in the County of Västmanland. In this area one of several company?s goals are to create ten new wetlands in their own forests as a part of cooperation with the Swedish bird society and Swedish wetland association.

It is essential to reuse- and recycles residues to decrease the amount of deposit materials and reach sustainable energy use. Two ways to work towards this is to recycle wood ashes to the forest as nutrient compensation and extract biogas from combustion of biomass.The aim with this study was to decide whether wood ashes that been used for biogas upgrading with accelerated carbonation also can be used as a nutrient compensation in the woods according to recommendations from the Swedish Forest Agency (Skogsstyrelsen).The ashes that were used in this study came from Johan Andersson who works at JTI in Uppsala, who also treated the ashes with biogas. The ashes have, in both untreated and treated condition, been analyzed in this study according to contents of elements, leaching properties, hardening properties and contents of crystalline phases, to evaluate what impact carbonation with biogas has on the ashes.The accelerated carbonation led to hardening of the ash, and decreased amount of CaO- and increased amount of CaCO3. The CO2-uptake also entails a dilution of the elements, and the content of nutrients and trace elements decreases. However the results show an indication of an uptake of S from the biogas to the ash, since the dilution had a smaller impact on S than the rest of the elements.