Lantmäteriet har sedan 2009 arbetat på projektet Ny Nationell Höjdmodell som ska täcka hela Sverige. Denna gång används Flygburen laserskanning för data insamling. För att skapa terrängmodeller av dessa laserdata behöver bearbetning först göras, där markpunkter skiljs från andra typer av objekt som laserpulsen registrerar. Det är detta som är ett av de största problemen för att uppnå en bra kvalité för slutprodukten (terrängmodeller). Eftersom Sveriges yta är så stor måste punktmolnet klassificeras med programvaror där en algoritm försöker filtrera ut markpunkterna.

In time with HolmenSkog district Egenskog Norrköping´s decreasing mountain of cleaning, the office started to look around for new alternative cleaning strategies to lower the costs connected with cleaning. One option was to make the inventory strategy more effective and after a phonecall with the head of the district, Jonnie Friberg, the planning started to try inventory in pictures taken from a helicopter. The pictures was at last taken from a digtal camera and the vegetationheight was mesured with a laser. The gear was supplied from Kallax Flyg AB, Luleå. In the trial 15 stands was selected depended on age and different mixtures between pine (Pinus sylvestris), spruce (Picea abies) and birch (Betula pubescense and Betula pendula).

Uppsats för avläggande av filosofie kandidatexamen iKulturvård, Landskapsvårdens hantverk15 hp, [2014]. (På omslaget felaktigt 2013).

With numerous applications in both military and civilian life, the demand for accurate 3D models of real world environments increases rapidly. Using an airborne laser scanner for the raw data acquisition and robust methods for data processing, the researchers at the Swedish Defence Research Agency (FOI) in Linköping hope to fully automate the modeling process.The work of this thesis has mainly been focused on three areas: ground estimation, image segmentation and classification. Procedures have in each of these areas been developed, leading to a new algorithm for ground estimation, a number of segmentation methods as well as a full comparison of various decision values for an object based classification. The ground estimation algorithm developed has yielded good results compared to the method based on active contours previously elaborated at FOI. The computational effort needed by the new method has been greatly reduced compared to the former, as performance, particularly in urban areas, has been improved.

Light Detection And Ranging (LiDAR) har under det senaste decenniet utvecklats mycket och används som datainsamlingsmetod vid inventering av skog. Lantmäteriet genomför mellan åren 2009 och 2015 en riksomfattande Flygburen laserskanning över hela Sverige och den laserskanningen ska leda till en ny nationell höjdmodell (NNH). Data som genereras från denna höjdmodell kan nyttjas av skogsindustrin för att göra skogliga inventeringar. Programvaruutvecklaren Esri Inc. har utvecklat ett stöd för hantering av denna typ av data i deras nya version av ArcGIS, ArcGIS 10.1.

Neoplasm 2.5D, is a project centered around exploring possibilities of combining various digital tools with the use of a lasercutter, to create intricate patterns withillusions of depth and texture, and to combine these studies into a working fullscale model that could be the basis for a future design product..

An increased number of participants in the construction industry is asking for accompanying terrain models to the project in order to get a better understanding of the field. When the desire to create buildings that fit together nicely with the surrounding area is increasing, it becomes more and more important to have a broad base of knowledge about the ground on which the building is to be erected. Terrain models are also very useful in the planning of logistics, documentation for landscape architecture projects, and billings for mass calculations.Surveys for creating terrain models can be performed with laser scanning. The advantage of laser scanning is the time-effective surveying, the detailed information as well as the ability of application in complex environments resulting in a cost-efficient project. With this in mind our thesis was defined in collaboration with the company Bjerking AB in Uppsala in order to investigate if there were any softwares suitable for terrain modeling.

Examensarbetet ?Laser measurements in building? utfordes under projektnamnet Laserscanner vid elektronikkonsultfirman Syntronic i Gavle av en student vid Linkopings Universitet. Projektet gar ut pa att utveckla och bygga en prototyp for beroringsfri avstandsmatning med laser. Prototypen skall sedan anvandas for utvardering av prestanda och identifiera problemomraden med denna typ av konstruktion. Prototypen innehaller ett delsystem for overforing av matdata till PC for efterbehandling.

In 2009 The National Land Survey of Sweden, Lantmäteriet, commenced a project intended to provide a new digital elevation model (DEM) of Sweden. The method chosen for the project was airborne laser scanning (ALS). In addition to information about the land surface the project will also provide information about the forest, this as a by-product. This data can be used to estimate forest variables such as height and volume. The estimates are often more reliable than what is standard today. This study is based on interviews with employees and members of the forest owner association Södra in southern Sweden.

This report discusses the development of lessons based on laborations for middle and high school.The purpose of the project was to research the possibility to affect students' attitude towards physicsthrough well-planned stimulating lessons. The lessons were based on the Light and Lasers OutreachKit, a teaching package made by the organisation Laser Classroom, and have been adapted for physicsin middle and high school. The lessons were developed on a pedagogical and didactical ground andwere improved with surveys and peer and self assessment. The lessons were based on laser light and itsproperties. One lesson covered the topic of single-slit diffraction, while the other treated geometricaloptics.

This report discusses the development of lessons based on laborations for middle and high school.The purpose of the project was to research the possibility to affect students' attitude towards physicsthrough well-planned stimulating lessons. The lessons were based on the Light and Lasers OutreachKit, a teaching package made by the organisation Laser Classroom, and have been adapted for physicsin middle and high school. The lessons were developed on a pedagogical and didactical ground andwere improved with surveys and peer and self assessment. The lessons were based on laser light and itsproperties. One lesson covered the topic of single-slit diffraction, while the other treated geometricaloptics.

This report discusses the development of lessons based on laborations for middle and high school.The purpose of the project was to research the possibility to affect students' attitude towards physicsthrough well-planned stimulating lessons. The lessons were based on the Light and Lasers OutreachKit, a teaching package made by the organisation Laser Classroom, and have been adapted for physicsin middle and high school. The lessons were developed on a pedagogical and didactical ground andwere improved with surveys and peer and self assessment. The lessons were based on laser light and itsproperties. One lesson covered the topic of single-slit diffraction, while the other treated geometricaloptics.

This report discusses the development of lessons based on laborations for middle and high school.The purpose of the project was to research the possibility to affect students' attitude towards physicsthrough well-planned stimulating lessons. The lessons were based on the Light and Lasers OutreachKit, a teaching package made by the organisation Laser Classroom, and have been adapted for physicsin middle and high school. The lessons were developed on a pedagogical and didactical ground andwere improved with surveys and peer and self assessment. The lessons were based on laser light and itsproperties. One lesson covered the topic of single-slit diffraction, while the other treated geometricaloptics.

This report discusses the development of lessons based on laborations for middle and high school.The purpose of the project was to research the possibility to affect students' attitude towards physicsthrough well-planned stimulating lessons. The lessons were based on the Light and Lasers OutreachKit, a teaching package made by the organisation Laser Classroom, and have been adapted for physicsin middle and high school. The lessons were developed on a pedagogical and didactical ground andwere improved with surveys and peer and self assessment. The lessons were based on laser light and itsproperties. One lesson covered the topic of single-slit diffraction, while the other treated geometricaloptics.

This thesis work is intended to analyze whether the municipalities has a need for the new technology of mobile mapping.Mobile mapping consists of the technologies of laser scanning, photographing and positioning of streets and roads in city environment and in the countryside. When these technologies are operating together a georeferenced three-dimensional image model is created, which has specific coordinates that states its position on the surface of the earth. Thanks to the laser scanning process even measuring can be performed in this model.The municipal sector consists of many different departments which use visual spatial information. These departments are an interesting target group for this system. Specific departments within the municipal sector, which we considered were the most suitable, have been selected.