This study was conducted at the City Abattoir in Kampala, Uganda to evaluate the cleaning process, with focus on bacterial pathogens, in a pilot scale integrated bioprocess. This consisted of four steps: anaerobic sequencing batch reactors; aerobic/anoxic sequencing batch reactors; a high performance temperature controlled methanogenesis digester and a constructed wetland. The objective was to determine if this type of cleaning process could be used to clean wastewater from abattoirs in a satisfactory way. The indicator organisms for faecal contamination, Escherichia coli and Enterococcus spp. were used to investigate in what numbers bacteria could be found in the untreated wastewater and how much that was reduced in the different steps of the cleaning process. The water was analysed for Salmonella to see if human pathogens could be found and could survive the different steps of the treatment process.

To regularly remove woody vegetation along the roadside of forest roads is an important part of the road maintenance, since the vegetation binds moisture in the road side and, thus, the removal makes the road drying faster with results in improved bearing capacity. Vegetation removal also makes it easier to upgrade the road by material recycling from the ditch and, moreover, the visibility along the road is maintained.The aim of the study was to evaluate what type of chain flail is the best and most cost-effective for removal of different kind of woody vegetation along forest roadsides.Time studies were made on two chain flails when removing woody vegetation in three different classes; easy-, middle- and heavy shrub removal. The studied flails were one light and rather simple flail named Optimal M160 and a heavier and more advanced flail named Slagkraft H210. The removal was made according to Holmen Skogs? specification and the quality of the cleaning was measured by objective belt inventory.The productivity was higher with the heavy flail within all cleaning classes.

The goal of this project was to together with Cochlear Bone Anchored Solutions AB develop a new cleaning tool for their Baha?systems. Cochlear BAS AB is a daughter company to Cochlear Limited based in Sydney, Australia. Cochlear BAS AB is situated in Gothenburg and with its 150 employees develop and manufacture the Baha?system.

The intensity of cleaning declined dramatically in the early 1990?s in the Swedish forests. Recession, an economic depressed forestry and the new law of silviculture from 1993, where the duty of cleaning was removed have been considered as sources to the decline. This has led to a situation where huge areas of forests are untouched, which can lead to negative effects for those stands in the future. The purpose of this thesis was to find out how the individual landowner acts and feel when it concerns cleaning activities. Has the landowner noticed Södra?s campaigns about cleaning and what sort of measure should Södra implement to increase the members? cleaning activity? The thesis is based on a opinion poll made through a random draw among all Södra?s members.

Ditch cleaning is increasingly important in Swedish forestry. This study compare different concepts concerning machinery, namely two general-purpose excavators of different sizes, 8 tonnes and 15 tonnes, versus a dedicated machine constructed solely to deal with ditch-cleaning. The machines were tested on rough as well as on gentle terrain and on open terrain as well as in young stands in connection with thinning. The conclusions were that the excavators are more versatile and have greater capacity than the dedicated machine, while the latter excels in quality of work. Interestingly, there was no significant difference in performance between the both excavators..

In time with HolmenSkog district Egenskog Norrköping´s decreasing mountain of cleaning, the office started to look around for new alternative cleaning strategies to lower the costs connected with cleaning. One option was to make the inventory strategy more effective and after a phonecall with the head of the district, Jonnie Friberg, the planning started to try inventory in pictures taken from a helicopter. The pictures was at last taken from a digtal camera and the vegetationheight was mesured with a laser. The gear was supplied from Kallax Flyg AB, Luleå. In the trial 15 stands was selected depended on age and different mixtures between pine (Pinus sylvestris), spruce (Picea abies) and birch (Betula pubescense and Betula pendula).

This thesis work has been performed at the Division of Assembly Technology at Linköping University for a period of ten weeks. The work is part of the project ProFlexA, which is a research project in collaboration between Linköping University, Lund University, and industrial partners such as Combi Wear Parts and Smålands Stålgjuteri AB.The casting process creates random incurred burrs and defects, which must be removed during a cleaning process to make sure that the cast can be sold. Automation has long been sought for the cleaning of castings due to, among other things, poor working conditions for staff, but this has proved difficult to implement with today's technology. Automation has for some time been available for more capital strong companies with large annual volumes, but for smaller companies with small-and medium-sized volumes, automation has not been an option.The goal of ProFlexA is to develop an automated cleaning cell aimed at small-and medium-sized volumes.The goal of the thesis is to do a pre study at ProFlexA?s partners on cleaning of castings, and develop concepts for automated cleaning of castings.By recording the process and cycle times, the cleaning of castings has been documented as it works today, and on this basis, information and statistics has been compiled.

At SIA TallOil's pellets factory in Latvia wood shavings and saw dust are dried with flue gases from a gas burner. TallOil wants to replace the gas with a biofuel that is available at the pellet plant. The reason for this is the unstable gas market in Europe in combination with the fact that TallOil wants to improve its profile as supplier of renewable bio fuels. In this project the technical and economical possibilities for a fuel conversion to ether bark powder, wood shavings or wood powder have been investigated. These fuels should be burned in one of the following applications: TPS BioSwirl, VTS Multifuel burner or Saxlunds bio fuel combustion plant Due to the fact that the fuel alternatives available are relatively common except for bark powder, the work has mainly been focused on bark powder.

Amongst the published literature researching wet cleaning of paper there is a limited amount of studies conducted researching the method simmering water treatment. There are even less studies conducted on how simmering water affects the paper being treated when used as a cleaning method. Despite the limited research, there are literary reviews describing the method and suggesting it as an alternative for conservation of paper with iron-gall ink. The following study will therefore be examining, the somewhat unusual method, simmering water treatment, and comparing it to one of the more common wet cleaning methods: immersion washing. This is done to compare how the different temperatures of the water affect the paper. The types of paper used in this study consists of three dyed and four undyed papers. All of the papers are new, apart from one sample originating from 1847.

This report is about changes in an organization. Changes is something that every organization sooner or later is bound to do. In many cases the changes leads to problems and conflicts. I have chosen to study one change process in the home help service of the municipality of Bollnäs. The change process I have chosen to study is about changes in the day-to-day work for the employees at the home help service.

Aim: The aim of this paper was to investigate whether scientific evidence exists to improve, of students? perceived, insufficient infection control in isolation facilities in companion animal hospitals in Sweden. Material and methods: A question was emailed to the students in the last year of the animal nursing program at SLU in the spring 2012 to get their view of perceived insufficient infection control. A literature study was thereafter preformed using the search engine Web of Knowledge. Results: The students reported several perceived shortcomings which were divided into five categories: basal hygiene, isolation routines, cleaning and disinfection, patient flow and other. Studies supporting that the shortcomings perceived by the students also exist in human health care and to some extent in animal clinics and hospitals were found. Furthermore, scientific evidence that improved hand hygiene, glove procedures and cleaning and disinfection reduces the risk of nosocomial infections in humans was reported. Conclusion: There is not a lot of research performed in the area of infection control in animal nursing.

The purpose was to describe the significance of participation concerning leisure time and household duties for persons with mild intellectual disability living in a group home with some support from caretakers. Interviews were performed with five persons, two men and three women, living in such a group home. The questions in the interview guide had an open character and were divided into four different areas, leisure time, economy, cooking, cleaning and laundry. The results indicate that all informants felt they participated in all four areas. Further on, the results show there was participation of three different kinds.

Uppsats för avläggande av filosofie kandidatexamen iKulturvård, Konservatorprogrammet15 hpInstitutionen för kulturvårdGöteborgs universitet2014:03.

In this project a washing station has been constructed for Albany International AB. At present, there is no existing system to clean the dirty pipes that are coming back to the company.The work followed the product development process, and it started with the requirements list. This was followed by brainstorming, evaluation and completion.The result was a concept for de present time and one concept for the future.The present concept is intended to be built immediately. This is an adjustable bench with sliding bearings to facilitate the work. The actual cleaning is done with a high pressure washer that uses hot water.

The aim of this work is to demonstrate how the net present value (NPV) at the time of the first thinning depends on the spacing after pre-commercial thinning, and show how net value from first thinning in same stand is influenced. This study is performed with models based on non-distant dependent growth models for single trees. Two different growth models have been used, one for cleaning (pre-commercial thinning) and one for thinning. The first one yields stem density distributed over diameter classes. In the second one, (the thinning model), it is possible to choose when thinning should be done, the thinning method, thinning grade and numbers of thinning.