Sök:

Sökresultat:

1343 Uppsatser om Flow simulation - Sida 18 av 90

Effektiviseringsmöjligheter på Tunadals sågverk : med innesäljarprocessen i fokus

The investigation was initiated because of the high workload of the sellers and, additionally, because the Tunadal sawmill has received low ratings in customer surveys. Thus,  two main approaches are adopted here,  the first being to investigate which of the three methods  of working, namely, market divided flow organization, function organizationand flow organization with collaboration, proves to be the most beneficial. The second is to investigate whether there is an available method to ease the daily work. A literature review has been made in order to determine more efficient ways for the sellers to work in the Tunadal sawmill. During the investigation, an in-depth investigation into the total quality management using a balanced scorecard as a management tool was conducted.

Kartläggning av truckflöden på Primary Products : Ur ett Lean Production perspektiv

The Transport division is responsible for the internal transports on Sandvik MaterialTechnology AB. At the moment there is no clear picture of how the straddle carriers aremoving at the division Primary Products and if it is working in a satisfying way. It isimportant to see the whole picture of the transportation flow so improvements can be made.The purpose of this essay is to survey and analyse the truck flow in a Lean Productionperspective. The essay is delimited to only include straddle carriers transportation ways in thePrimary Products division. To survey the truck flow we have used a method called Walkthrough.This means that we have walked thorough the whole production flow andinterviewed some of the employed on the way to get the necessary information.

You got flow? ? En studie om konsumentbeteende online

Dagens konsumentbeteende online skiljer sig åt från hur det såg ut för bara några år sedan, någotsom kan förklaras av att både e-handel och Internet ständigt utvecklas och vårt köpbeteende ochvåra preferenser tenderar att förändras över tid. Den tekniska utvecklingen gör attkonsumentbeteendet inom e-handel tenderar att växla snabbt vilket gör kontinuerlig analys avkonsumentbeteende till en nyckelfaktor för att lyckas inom e-handel.Studien syftar till att undersöka det något yngre kvinnliga segmentets, i åldern 25-34 år,konsumentbeteende inom e-handel idag. Flow är ett använt begrepp för analys avkonsumentbeteende och har visat sig påverka både attityder och avsikter avsevärt inom virtuellamiljöer som exempelvis e-handel. Flera definitioner på begreppet tyder på en viss komplexitetoch att tillståndet tenderar att förändras och växa i takt med utvecklingen. I studienkonceptualiseras flow i kategorierna koncentration, njutning och förvrängd tidsuppfattning, där viundersöker hur de påverkar webbsajters användarvänlighet och konsumentens upplevdabeteendekontroll, och vi fokuserar på konsumentbeteende online i form av impulsköp och avbrutna köp då vi önskar analysera om beteendena påverkas av ett flow-tillstånd Via en enkätundersökning med kvinnliga studenter från svenska universitet visar våra resultat attflow i form av njutning och förvrängd tidsuppfattning ökar impulsköp, medankoncentrationsnivån inte har någon påverkan på konsumentens impulsivitet.

Mesatorrhalt

AbstractDegree thesis Solid content in Lime Mud By Andre Flodin Process operator program ? Umeå University 17/6 ? 2014 Pages: 21A thesis was made on Billerudkorsnäs production unit in Karlsborg where lime kiln in the causticising department of chemical recovery plant does not meet the required production. Causticising department is the final step in the chemical recycling unit. There, the filtered green liquor is mixed with lime to recover the cooking chemicals used in the pulp factory. The cooking liquid is called white liquor.

Modellering och simulering av det evaporativa bränslesystemet i en personbil

This thesis work has been performed at the department of diagnosis and dependability at Volvo Car Company, Torslanda. The background of this project is based on interest in ascertaining how different factors possibly can affect a diagnosis method, which has been developed to find leaks in the fuel tank and evaporation system. According to the OBD II requirements leaks with an orifice diameter larger or equal to 0,5 mm, must be detected. The idea of the diagnosis method is to create an over pressure in the system with an air-pump. The current through the pump is measured and correlates to the power consumed by the pump.

Föroreningsspridning via ledningsgravar : en fältstudie på Köpmanholmens industriområde

Sewer trenches usually contain material with a higher hydraulic conductivity then the adjacent soil. Thus they can serve as paths of preferential flow in a polluted area. Wastewater from factories can also leak from wastewater pipes and pollute the soil in the sewer trenches.The purpose of this project was to investigate pollutions in sewer trenches and in sewer pipes in the industrial area of Köpmanholmen, 20 km south of Örnsköldsvik in the north of Sweden. To make an estimation concerning the potential of transport of pollutions in sewer trenches, hydrological calculations were performed.Leakage to any greater extent did not seem to be a problem in the area. This is the case both for the concrete and the wooden pipes that have served as factory wastewater pipes.

Fluidrörelse- och värmetransportsmodellering i götugn

The purpose of this thesis for Sapa Heat Transfer is to examine a furnace in which aluminium is pre-heated before hot rolling. The project is modeled in a computer environment in which the air flow in the furnace and the heat transfer to the aluminium solids are included. The computer environment and its governing equations, as well as boundary conditions and generalizations, are presented and explained.The simulations are based on two models. The first model has an asymmetric solid placement, which is how it looks in today's ovens. It is validated against collected data.

Modellering av reflektans från ett sockerbetsbestånd med hjälp av en strålningsmodell

The Multispectral Canopy Reflectance Model (MCRM) by Kuusk (1995) has beenused to simulate the reflectance of a sugarbeet canopy. The simulated reflectancevalues show high absorptance in the VIS area, compared to field measurements, andhigh reflectance values in the NIR area. The errors may be due to overestimation ofclorophyll content in the sugarbeet leaves and scattered light during fieldmeasurements. The estimation of the clorophyll content where carried out using thePROSPECT-model by Jacquemoud & Baret (1990).During the vegetation period, the state of the canopy moves towards a closed canopy,with sparse vegetation in spring. The MCRM-model was used to perform a ?spring?simulation, which was compared to the original simulation.

Utökning av mätområdet för turbinverkningsgraden på avgasturbo

The Goal with this Master of Science thesis is to expand the possible turbine efficiencymeasurements on an exhaust turbocharger. It was done as a part of the CICERO competencecentre. To feed the turbine with air a special flow rig has been used. Instead of loading theturbine by just restricting the compressor flow a docking system for an electrical dynamometer isdesigned to use the dynamometer as an additional loading source. By using an electricaldynamometer as loading device for the turbine, measurements are not depending on compressorperformance.A large part of the work consists in designing accessories for the dynamometer.

ISIT-modellen : Vägledning för att realisera en verksamhets informationssäkerhetsmål

The ISO standard ISO/IEC 17799/SS-627799-2 is a guidance for organizations to realize their information security goals. In spite of this standard, studies show flaws regarding information security in organizations. In particular flaws regarding overall view, knowledge and clear roles and responsibilities have been observed. The ISIT (Information Security Integrated Three level) model and its guidelines, developed in this thesis, help organizations to identify the required processes and procedures as well as the logical process flow. The thesis is based on theoretical studies and a case study within a multinational company.

Passande svårighet? : Spelares uppmärksammande av och attityder till dynamisk svårighetsjustering

Syftet med detta arbete är att undersöka hur dynamisk svårighetsjustering påverkar hur spelare värderar ett spels svårighet, presterar under en spelsession och huruvida de kan upptäcka ett system för sådan justering samt identifiera hur det fungerar.  Arbetet vilar främst på Robin Hunickes arbete kring dynamisk svårighetsjustering men vidrör även koncept som svårighet, flow och olika typer av svårighetsjustering. För att undersöka huruvida system för dynamisk svårighetsjustering påverkar spelande har ett plattformsspel utvecklats och speltestats i två versioner av en handfull respondenter, en version som justerar svårigheten i spelet dynamiskt och en som balanserats för hand. Resultatet från dessa speltester ger inga direkta stöd för att dynamisk svårighetsjustering får spelare att prestera bättre och tyder på att spelare vid en första spelomgång har svårt att identifiera system för dynamisk svårighetsjustering. Resultatet visar dock även på att mer undersökningar kan behövas på ämnet i framtiden..

DCF-modellering vid multipelvärdering: En empirisk studie av hybrida värderingsmodellers prediktionsförmåga

Today, there are a number of different models and methods used to estimate the equity value of a company. A common tool for valuating stock prices is the usage of different multiples. This is a method used to determine the value of a company, by examining and comparing the financial ratios of relevant peer groups. The disadvantage with this method is that it does not take all the important aspects, such as risk, investments and capital structure, into consideration. However, this study investigates if the key value, called discounted cash flow (DCF), can be integrated with the valuation of the multiples.

ISIT-modellen - Vägledning för att realisera en verksamhets informationssäkerhetsmål

The ISO standard ISO/IEC 17799/SS-627799-2 is a guidance for organizations to realize their information security goals. In spite of this standard, studies show flaws regarding information security in organizations. In particular flaws regarding overall view, knowledge and clear roles and responsibilities have been observed. The ISIT (Information Security Integrated Three level) model and its guidelines, developed in this thesis, help organizations to identify the required processes and procedures as well as the logical process flow. The thesis is based on theoretical studies and a case study within a multinational company.

Markavvattningsföretagens geografi och konsekvenser i Trosaåns avrinningsområde

Agricultural drainage is widely used to manage the amount of water in the ground in order to improve conditions for cultivation. However the effects of drainage companies on water regimes are considerable leading to runoff changes such as altered stream flows, peak flows and water levels. In a greater extent this could imply an increased risk for floods along affected watercourses. This study analyzes the extension of agricultural drainage within the drainage basin of Trosaån in Sweden by ArcGIS mapping. In a statistical analysis, historical variation in streamflow in relation to mean precipitation and mean temperature are investigated for the study area.

Hur kan det flöda bättre? : Flow-teorin som hjälp i komponerandet och musiklivet

Syftet med det här arbetet var att gestalta fem olika känslor inom genren symphonic metal. Därigenom ville jag avgöra vilka verktyg jag kunde ha nytta av i framtiden för att gestalta känslor musikaliskt och vilka skillnader som finns mellan att gestalta olika känslor. För att göra detta använde jag mig av referenslyssning av tio låtar plus några orkestrala stycken per känsla. Resultatet av lyssningen, tillsammans med olika låtskrivningstekniker, litteratur, Kirnbergers intervallkaraktäristik och Matthesons tonartskaraktäristik, användes till att skriva och arrangera mina fem låtar. Resultatet blev att jag hade lyckats skildra känslorna bra med den metod jag hade använt, men att intervallkaraktäristiken och tonartskaraktäristiken var onödiga; det skulle räcka med mina kunskaper som jag hade förvärvat under utbildningen, referenslyssning och min känsla som låtskrivare. Jag kunde inte heller urskilja några skillnader mellan att gestalta de olika känslorna; metoden var universellt tillämplig..

<- Föregående sida 18 Nästa sida ->