Chlorinated solvent are volatile organic substances that can be harmful for humans and for the environment. Examples of common chlorinated solvents are perchloroethene, PCE, and trichloroethene, TCE. Chlorinated solvents appear as contaminants in soils primarily where they have been used as washing fluids in dry-cleaning facilities or as degreasers in metal industries. Chlorinated solvents are DNAPLs (dense non-aqueous phase liquids), which means that they are not easily dissolved in water and that they sink to the bottom of the aquifer. Adsorption to soils is low so chlorinated solvents are mobile in soils.

In health care today at Uppsala County Council the daily work involves spending time at the computer. IT-systems were implemented to support and aid the care givers in their work. Around these systems there is a support organization to support the users in using the system. The aim of this thesis is to investigate this organization in terms of how well it works and how successful it is in helping the users. This has been done by investigating the flow of information trough the organization and by focusing at the role of IT-coordinators with responsibility for support, process development, education and statistics.

The globalization that has occurred during the last few years has made it more important for companies to have a well-functioning logistics system. Customers demand more options, which lead to an increased flow that creates greater demand regarding packaging and transports. Diverse logistics costs are nowadays a substantial cost for many companies. Therefore, more effort is aimed at optimizing transportation to lower these costs.The purpose of this project is to create a user-friendly calculation of logistics costs that illustrates how the costs vary, depending on how the flow is structured. This is done by examining which aspects that affect the total logistics costs and by mapping which aspects that should be included in a calculation of the logistics costs.Literature studies have been carried out parallel with empirical studies at Scania's production unit, MC, in Oskarshamn.

During the Swedish banking crisis in the early 1990?s, the government paid out 65 billion Swedish kronor to save Swedish banks from bankruptcy. In the process, two banks left the private sector to be taken over by the state. This thesis builds on a study from 1998 in seeking to quantify the financial end result for the Swedish government from the subsidies. Taking a cash flow approach and accounting for the time difference, it starts with the money paid out during the years of crisis and subtracts the money that has since been returned to the government by successful management of the relinquished assets.

The main focus for this essay is to describe the relationship between human and nature through a material investigation that takes its shape through sculpture. With the help of a fairytale-like story the reader can share the creation of the sculpture and how my thoughts flow through the process that will result in an exam project. Rooted in earlier projects I discuss the crash between civilization and the wilderness as well as talking about the likeness of the creative process and child play. I also discuss the body's place in the forest and the loneliness that we humans created that has cut us off from the rest of the creatures and plants in the forest. My aim is that in the final piece I will create a fiction place where these can be joined together again.

This project aims at investigating if the use of UML as a support to small-scale development ofan embedded system is relevant. The investigation is conducted by using UML during the initialphase of the development ofTelfafill, a filling machine by the company ?Telfafill AB?. The aimof the development of Telfafill is to separate the user interface from the control unit. In additionto this main objective, Telfafill AB would like possible changes to, and additions of,functionality of the filling machine to be investigated.Within the boundaries of this project, the development of Telfafill reached a full requirementspecification of the proposed system, and contact was made with potential external developers.No prototype construction had been started when the project ended.

In Sweden there is a large interest in renewable energy but the market for solar power is still small compared to other countries such as Germany. Here many farmers produce their own electricity. The Federation of Swedish farmers have acknowledged the potential for Swedish farmer to produce electricity and there is an interest among the farmers. The agricultural branches in Sweden most suitable for solar power are pig production and poultry due to the even electricity need throughout a year. Swedish pig farmers are going through a period of unsteady profitability which makes it interesting to see whether producing their own electricity can affect the economic situation.

Valmets own foundry in Karlstad has during a long period of time had problems being profitable. The goal today is to turn this around. Today there are three different productionlines; engine blocks, Yankeecylinders and components for the wind turbine industry. This master thesis has focused on examining if value stream mapping is a useful tool to use in a foundry, and therefore outside the typical manufacturing industry. The target has also been to evaluate if there is a possibility to improve the flow in the foundry and also the results.During the 20 weeks this work has been done at the foundry data has been collected and analyzed.

In order to facilitate design and maintenance of such a large and complex site as a nuclear power plant, all system functions must be described in a stringent way. In the past, these descriptions consisted of text documents and logical diagrams, but today there are an increasing number of object-oriented programs available on the market which might be used for this purpose. This Master Thesis has made a closer study of one of these programs named Rational Rose. The principal of the program is to facilitate software design and development, not to create models of plants. However, using the program the same way as developing software, specifying actors then gradually extend the model with use cases, use cases diagrams etc, the same methods can be used when modelling plants.

Today there is no way of measuring or simulating turbulent flow in high Reynolds numberenvironments. The computational power required to simulate these conditions is not expectedto be available for several decades so instead the CICLoPE project aims at solving thisshortage by the construction of a long carbon fiber wind tunnel in which real measurementscan be made. To do accurate measurements it is of importance that the wind tunnel, 0.9 metersin diameter and 110 meters long, is as straight as possible.This master thesis treat the design and construction of a device which may be used to align thetunnel along a reference laser beam. A design is presented which allows the pipe to be alignedwithin about a quarter of a millimeter along its entire length. Contents span over severalscience fields such as physics, mechanics, control theory and electronics.The result is a theoretically correct design.

There are several methods and models within the areas of software engineering on how to proceed during a software development process. For each of these methods and models there are benefits and drawbacks, depending on how you choose to look at them. A difference of principle between the different models is that they either advocate iterative development or not. In parts of software engineering one makes use of different methods depending on which is most fitting in a specific situation. There are several methods on how to recieve more qualitative data from the end-users during the requirement collection, but the reappearing pattern is still user centric participation, which means that the user participates more actively in part of or the entire development process.

The purpose of the present study was to investigate the cow-level association between acute hoof lesions and the somatic milk cell count in dairy cattle. Cows from three loose-housed Swedish dairy herds were enrolled in the study if they had an acute hoof lesion treated by a veterinarian or professional hoof trimmer during the preceding year, according to farmer records. Studied lesions were sole ulcer, dermatitis, interdigital necrobacillosis and hoof abscess, in each case causing lameness. For each hoof-diseased cow, 0 to 3 healthy cows were included, matched with respect to herd, breed, parity and lactation stage. Cell counts were obtained from monthly test recordings from one month before to three months after the hoof-lesion diagnosis, and log-transformed.

Title: How to manage stress seen from a leadership perspective Authors: Lina Jonsson, Kristian Olsson, Mattias Olsson, Shabnam Tahajjod Supervisor: Marie Aurell Department: Department of Business Administration, IEM Course: Bachelor thesis in Business Administration, FEC 007 Question of issue: How can we understand stress managing at a workplace seen from a leadership perspective? Method: We have chosen a qualitative method for our thesis with inter-views as qualitative data collection. The interviews had a low grade of standardization. Result: On the basis of our question of issue we have drawn the con-clusion that it is important to create comfort at the workplace, that there are a safety and a feeling of handle the work tasks and that there is a plentiful information flow between managers and employees to manage to handle the workplace stress situa-tion..

This study investigates the value relevance of goodwill impairments for equity investors in Swedish listed companies. We provide insight on whether goodwill impairments are value relevant before as well as after the implementation of IFRS 3 and IAS 36. We express market value of equity as a function of book value of equity; net income excluding goodwill impairments and goodwill impairments, using the Ohlson valuation model and Hellström's price regression. Our findings suggest that goodwill impairments are statistically value relevant for equity investors. Prior to the implementation of IFRS 3 and IAS 36, our findings imply that equity investors respond negatively to goodwill impairments.

Abstract Tutor - Anders Richtnér History - Theories suggest that Lean Product Development strategies dramatically increase a company's performance through enabling faster T-T-M, Quality and Costs of Product Development. Purpose - The purpose of this paper is therefore to investigate whether the implementation of LPD actually affect corporate performance measurements T-T-M, Quality and Cost, in a positive way. Methodology - This Bachelor thesis is an exploratory investigation of the concept of Lean Product Development within a global IT- company, performed through four case studies, interviews and complementing corporate performance data. Findings - With empirical data and subsequent analyzes in mind, we note the following; it is clear that the project that produced the best results, in terms of T-T-M, Quality and Cost, also was the one furthest in the process of implementing Lean Product Development..