The interest in harvesting wood fuel in conflict stands has grown in recent years as a consequence of the increased demand for biofuel. Conflict stands are young forests that have not been cleaned and have a large number of stems ha-1with a great height and diameter distribution. This means that traditional field measurements in conflict stands are difficult and very time consuming. Therefore, the forestry sector is in need of new, more efficient inventory methods. In this study, the Lidar data from Lantmäteriet?s (the Swedish mapping, cadastral and land registration authorities) new national height model was used in combination with plots from the Swedish national forest inventory from 2009 to create functions for; height, volume, diameter and number of stems.

Container Security Initiative was launched in 2002 by the US Customs and Border Patrol in order to secure the global flow of containers destined for USA. This thesis attempts to analyze Container Security Initiative in relation to a possible future scenario made by the weapons industry where the state's global traderoutes are being subject to militarization. A development which is partly based on the threat posed by global illegal trade. The latter is discussed and defined based on current research made by Carolyn Nordstrom, Moíses Naím and theories on the cosmopolitan perspective made by Ulrich Beck. Strategy documents concerning Container Security Initiative are then analyzed in terms of discourse to try to say something about what the program indicates.

In this project a washing station has been constructed for Albany International AB. At present, there is no existing system to clean the dirty pipes that are coming back to the company.The work followed the product development process, and it started with the requirements list. This was followed by brainstorming, evaluation and completion.The result was a concept for de present time and one concept for the future.The present concept is intended to be built immediately. This is an adjustable bench with sliding bearings to facilitate the work. The actual cleaning is done with a high pressure washer that uses hot water.

This report contains results of our study at CTC in Ljungby. CTC produces heating products such as boilers, heat pumps and additional products to their heating systems.The purpose of the report is to make a proposal how CTC will supply their new production line for heat pumps with materials. The proposal includes a production layout and a scheme for how to place the material in the production storage.The new production line will produce two different products and both of them have several variants. The line will also have a mixed flow, so the products can be produced in a random order. These conditions demand that the production line has great flexibility and that the material to all the variants can be stored in the production storage.With these conditions as input we made a layout proposal to the company.

The production costs have steadily increased within the construction industry during the 21st century. Voices are raised meaning that the construction industry is too unsuccessful in making the production more efficient and to develop it?s way of working. One way to deal with the production costs is to minimise the waste, with waste meaning activities that doesn?t add value to the finished product.

This report is the result of a thesis work carried out on the Risifrutti production at the company Procordia Food AB. The thesis is at a master level and is the final work for the author to receive a Master of Science in Innovative production at Mälardalen University. The thesis comprises 30 credits and has lasted for 18 weeks. The thesis is mainly a research on whether it is possible to perform an Environmental Value Stream Map (E-VSM) in a food processing industry and an evaluation if the tools E-VSM and Green Performance Map (GPM) are useful in this type of industry. An extra part to this research is to use the results from the E-VSM and give Procordia Food AB information on improvement potentials in the Risifrutti production. The author has found it difficult to collect some of the quantitative data to the E-VSM, mainly regarding energy, but by using the Value Stream Mapping (VSM) tool and other Lean tools the author was able to identify and quantify several wastes in the Risifrutti production. Recommendations for improvements based on these wastes have been given to the company. In the research part of this report the utility of the Value Stream Map, Environmental Value Stream Map and Green Performance Map in a food processing industry have been analyzed. The author has found that the Value Stream Map has been a useful tool since waste and unevenness in the tact of the production has been identified. The Environmental Value Stream Map and the Green Performance Map are also great tools when a company wants to analyze their environmental impact and then invest in environmental improvements. However, no profound energy analyzes has been done in the Risifrutti production because of the lack of energy meters for steam, electricity and compressed air in the production lines..

Scana-Booforge is a Swedish company which specialize in heat treatment of various metal. The treatments take place in quenching ovens, where fans are used to circulate the hot air. The fans used today do not have a satisfactory lifespan. This thesis aims to develop a new design of the fans for the quenching ovens, and the goal is that the new fans will bring cost savings for Scana-Booforge.The design development process started with mapping out the environment in which the fans operate, and with analysis of the existing fan structure and damages, in order to establish the cause of failure and of short durability. The performance of the fan were also established at this stage.

In view of the difficulty of recruiting staff to care profession and in terms of the increasing need to find ways of ensuring a good language level in the profession, have an interest in language tests been revealed. The purpose of this paper is therefore to highlight the use of language tests for admission to the care courses for adults in Värmland. What provided This is a survey of the prevalence and an examination of the validity of the test. The issue that this study assumed is: How is language test in connection with admission to the certified health and social care courses for adults in Värmland? How well correlates intent of the use of the language test with the test's validity and reliability?The methods used to seek answers to these questions has been a combination of questionnaires and experiments.

Plant nutrients are important for all life on earth and are also important as fertiliser infood production all over the world. Because of this, plant nutrients are of great valuebut they also bring problems. As an example, the loss of nitrogen and phosphorusfrom agriculture and urban society's sewage systems contributes to some of today?smajor problems in water environment. Another problem associated with plantnutrients is that finite recourses are used in the production of mineral fertilizers.

Face-to-face communication is always complemented with non-verbal signals that give us clues as to how a message shall be interpreted, but as communication is moved online the possibilities to express oneself becomes more limited.This paper focuses on the instant messaging client Windows Live Messenger and three of the non-verbal functions that it provides (nudges, winks and emotes). The purpose of the paper and its underlying study is to compare the senders' intentions with the receivers' conceptions when it comes to these functions.The study was done as a questionnaire with two different versions of the questions, one looking at the senders' intentions and the other at the receivers' conceptions.The results were then compared in order to look for tendencies. The results showed that the most common intention among the senders was also the most common conception among the receivers, but that the rest of the attitudes didn't match at all. The functions that are supposed to help the conversation flow often create ambiguity instead and lead to vagueness, misconceptions and annoyance..

Ett av de främsta nyckeltalen som speglar om företaget är framgångsrikt eller inte är lönsamhet. Då lönsamheten för företag generellt tenderar att vara hög då den ekonomiska marknaden där företaget verkar är gynsam, kan man säga att företagets lönsamhet borde vara hög i högkonjunktur och låg i lågkonjunktur (Yeh & Roca, 2012). Med detta resonemang borde det kunna finnas en koppling mellan ett företags skuldsättningsgrad, konjunkturen och lönsamheten.I den här studien har fyra olika skuldsättningmått undersökts där det huvudsakliga skuldsättningmåttet är totala skulder genom totala tillgångar (TD/TA). Studien har valt att undersöka företag i branscherna industriteknik, medicin och material. Syftet med studien är att försöka bredda och styrka det spektrum av teorier som finns tillgängliga genom att besvara studiens forskningsfrågor om ekonomisk tillväxt och lönsamhet kopplat till skuldsättningsgraden.

Hammarby Sjöstad is a new district of southern Stockholm built with focus on reduced environmental impact by recirculation of materials and sustainability. The environmental goals aim to cut the water consumption by half and a separate storm water treatment. Thus, the wastewater will be more concentrated and will originate from the households only. The Sjöstad project includes the idea of a local treatment plant for the household wastewater. To evaluate this possibility, Sjöstadsverket, an experimental treatment plant was constructed.

The question formulation in the essay brought up whether Clas Ohlson works today with their graphical productionflow and if that way of working leads to a desirable result in press. After a dialogue with Clas Ohlson it emerged thatthey had certain problems with the material that came out of the printing presses. Certain colours were not reproducedaccording to the stated values that had been developed. In March -08 an analysis of the graphical production flowspresent situation were done at Clas Ohlsons in order to find out how they worked with their production of print materials.In the analysis, their way to work with color spaces, displays, ICC-profiles, PDF-exports, pictures and printerswere examined. Occasional interviews were also implemented with responsible personnel about how they worked withdifferent aspects.Deficiencies were found on almost all examined parts in their graphical production flow.

By using industrialized building, pre-installed modules can be delivered to the construction site where they are easily mounted. This method has many advantages compared to on-site manufacturing, for example, the precision during the production process should be much higher than building each wall and floor on site. Furthermore, the quick erection procedure when using prefabricated elements and the possibility to use weather protection has the advantage of not being dependent on weather conditions, and many other factors.Masonite Beams AB is a Swedish company (a member of the Norwegian company, Byggma ASA) with a relatively new technology using light weight beams as bearing elements in the walls and a certain stiff board lamella slap which is mounted on the top of the floor structure creating an integrated stiff beam / board floor structure. The elements are flat which make it much easier to transport the elements from the factory to the building site where the building parts are easily mounted with special mounting stud.One of the main drawbacks of lightweight structure is the sound transmission. The main topic is low frequency annoyance, however the complex structural elements and their mutual sensitive connections other acoustical problems might appear.

Public participation in urban planning is meant to increase democracy in the planning process. Even though all citizens have the option to participate in urban planning debates, few seize their chance to partake. This thesis describes a study on how user needs are met and prioritized in design processes concerning urban planning. The aim was to determine whether user-centered design (UCD) methods could be used as an avenue for public participation in urban planning and ultimately invite more citizens into the planning process.The thesis details a design process where a team worked to develop Farsta, a suburb of Stockholm. The design problem was the question of how Farsta could become an attractive business location.