When establishing a groundwater protection area it is of great interest to be able to estimate the transit time of the groundwater from different places of the aquifer to the withdrawal well. These estimates can be uncertain due to heterogeneities in the aquifer. As a part of the work to develop methods for a more certain delineation of protection areas, a tracer test was performed in an esker located 25 kilometres NW of the town Uppsala.The purpose of this master thesis was to perform, describe and evaluate the tracer test. Travel times from the tracer test should then enable comparison against stochastic simulated travel times of the groundwater in the area.Three dyes (rhodamine WT, uranine and naphtionate) and a salt (NaBr) were used in the tracer test. The tracers were injected in four different wells located 25 meters from a pumping well.

Due to exploitation of the world?s rivers, the upstream migration of anadromous species is frequently delayed or even prevented. To mitigate these problems and allow fish to migrate past obstacles, structures such as fish ladders have been developed. However, recent studies show that many of the present fish passage facilities are deficient. Monitoring and evaluation of passage facilities is therefore crucial to enable necessary adjustments.

With the globalization, companies in the West chose to shift production to developing countries to cut down costs. This had a major impact when child labor and very poor working conditions in these factories were discovered and led many companies to take responsibility for their suppliers and the employees by adopting voluntary so-called Codes of Conduct.There is a subtle balance to enforce improvement of working conditions for employees at suppliers´ factories and to keep costs down. On the one hand, companies would like to conduct extensive audits at their suppliers to ensure code of conduct compliance and thus protect their legitimacy. On the other hand, audits are expensive so companies would like to minimize audits to keep costs down. Companies thus have to strike a delicate balance in relation to how many and what suppliers they choose to audit.

Between 1965 and 1974, the Swedish Parliament decided to build one million dwellings, called Million Program. The million program buildings were erected with new, untried design solutions, in a short range of time, and at low cost. The residential buildings from that time are now greatly in need of renovation. The municipal housing company, Gavlega?rdarna, renovates and improves the energy efficiency at some of it?s apartment buildings in the district Sa?tra, Ga?vle.

The aim of this literature study was to analyze how milk urea concentration is working as a measure of the nitrogen supply to rumen microbes and indicator of the environmental load. Questions included in this literature study were how to improve the dairy cattle nitrogen efficiency and what correlations there are between milk urea, nitrogen efficiency and crude protein content in the feed. Effects on the reproduction from high ration protein content are also addressed. Dairy cattle are today fed with large proportions of protein which could lead to high expenditure of feed and environmental pollutions. The nitrogen can be lost to the environment by different pathways; leaching, denitrification or by emission to the air.

The aim of this literature study was to analyze how milk urea concentration is working as a measure of the nitrogen supply to rumen microbes and indicator of the environmental load. Questions included in this literature study were how to improve the dairy cattle nitrogen efficiency and what correlations there are between milk urea, nitrogen efficiency and crude protein content in the feed. Effects on the reproduction from high ration protein content are also addressed. Dairy cattle are today fed with large proportions of protein which could lead to high expenditure of feed and environmental pollutions. The nitrogen can be lost to the environment by different pathways; leaching, denitrification or by emission to the air.

A one-cylinder research engine has been used for studies with a Diesel Dual Fuel concept (DDF). DDF is a concept that utilizes a pilot diesel injection to ignite a homogenous natural gas/air mixture. Emissions and engine efficiency have been analyzed in an emission cycle called European Stationary Cycle (ESC) and the knock/pre-ignition problems with this type of engine have been investigated.At low and mid torque levels, an early diesel injection around 60 crank angles degrees (CAD) before top dead center (TDC) was used. At these loads raw NOxemissions was below EURO 6 level (0.2 g/kWh). NOxwas at EURO 5 level over the complete ESC without after treatment and with SCR at high loads it should be possible to reach EURO 6.One issue with DDF is the high HC emission levels.

Examensarbete utfördes på CA-Verken i Sävsjö som bl.a. tillverkar hydraulcylindrar. De senaste två år har CA-Verken haft en kraftig ökning av omsättningen och det som står i vägen för fortsatt expansion är produktionen som har begränsad kapacitet.Målet med detta arbete är att studera CA-Verkens produktionsflöde för att kunna identifiera flaskhalsen/flaskhalsarna och därefter ge förslag på lösningar och förbättringar. Den teorin som har använts som grund till arbetet är Theory of Constraints (TOC). Intervjuer, företagets affärssystem och observationer har använts vid datainsamling.

The Transport division is responsible for the internal transports on Sandvik MaterialTechnology AB. At the moment there is no clear picture of how the straddle carriers aremoving at the division Primary Products and if it is working in a satisfying way. It isimportant to see the whole picture of the transportation flow so improvements can be made.The purpose of this essay is to survey and analyse the truck flow in a Lean Productionperspective. The essay is delimited to only include straddle carriers transportation ways in thePrimary Products division. To survey the truck flow we have used a method called Walkthrough.This means that we have walked thorough the whole production flow andinterviewed some of the employed on the way to get the necessary information.

Dagens konsumentbeteende online skiljer sig åt från hur det såg ut för bara några år sedan, någotsom kan förklaras av att både e-handel och Internet ständigt utvecklas och vårt köpbeteende ochvåra preferenser tenderar att förändras över tid. Den tekniska utvecklingen gör attkonsumentbeteendet inom e-handel tenderar att växla snabbt vilket gör kontinuerlig analys avkonsumentbeteende till en nyckelfaktor för att lyckas inom e-handel.Studien syftar till att undersöka det något yngre kvinnliga segmentets, i åldern 25-34 år,konsumentbeteende inom e-handel idag. Flow är ett använt begrepp för analys avkonsumentbeteende och har visat sig påverka både attityder och avsikter avsevärt inom virtuellamiljöer som exempelvis e-handel. Flera definitioner på begreppet tyder på en viss komplexitetoch att tillståndet tenderar att förändras och växa i takt med utvecklingen. I studienkonceptualiseras flow i kategorierna koncentration, njutning och förvrängd tidsuppfattning, där viundersöker hur de påverkar webbsajters användarvänlighet och konsumentens upplevdabeteendekontroll, och vi fokuserar på konsumentbeteende online i form av impulsköp och avbrutna köp då vi önskar analysera om beteendena påverkas av ett flow-tillstånd Via en enkätundersökning med kvinnliga studenter från svenska universitet visar våra resultat attflow i form av njutning och förvrängd tidsuppfattning ökar impulsköp, medankoncentrationsnivån inte har någon påverkan på konsumentens impulsivitet.

AbstractDegree thesis Solid content in Lime Mud By Andre Flodin Process operator program ? Umeå University 17/6 ? 2014 Pages: 21A thesis was made on Billerudkorsnäs production unit in Karlsborg where lime kiln in the causticising department of chemical recovery plant does not meet the required production. Causticising department is the final step in the chemical recycling unit. There, the filtered green liquor is mixed with lime to recover the cooking chemicals used in the pulp factory. The cooking liquid is called white liquor.

In Sweden whenever trains or maintenance workers want access to the railway system, their requests of usage and movements are being supervised, granted and handled by train dispatchers. The profession holds a key role in making the complex railway system work in terms of efficiency, safety and delivering on-time arrivals. This master thesis, delegated by the Swedish Transport Administration, has been carried out at the Division of Human Computer Interaction at Uppsala University and at the train traffic control center in Gävle. The aim has been to map what information the train dispatchers use in order to make safety-related decisions concerning their working goals. And further to describe and analyze how the train dispatchers, visavi their tools and systems in the work domain, gather necessary information.The result indicates a complex, diverse and spread out setting of different programs, procedures and tools that make satisfactory fulfilment of efficiency, safety and punctuality in relation to the time table hard.

Business Process Modelling Notation (BPMN) is a way to graphically draw a diagram of a business process. A BPMN diagram consists of several so-called flow objects. These are interconnected in the graph through sequence  flows. BPMN models are merely graphical representations of business process and there is a need to simulate these diagrams for different purposes. The simulation that now is available for BPMN is that the model is evaluated by checking if it is correct.

During the autumn 2009, a 15 hp degree project was accomplished. The objective of the study was to describe different equipment alternatives, suitable for fresh market apple harvest. A field study was conducted during the harvest period to evaluate the efficiency (kg / person/ hour), using the different equipment. Four different systems are described in the study; Pick-ing-bag, Picking-train, Pluk-O-Trak and the Conveyor Harvester. The information about the systems is based on interviews with growers together with previous studies.

Feedback tools support electricity users within the Swedish residential sector to increase their knowledge of electricity and the electricity market as well as to become more aware of their electricity consumption, which in turn encourages a reduction and an increased flexibility of electricity use. The primary aim of this study is to identify and analyse how existing feedback tools can be improved, to ensure that they contribute efficiently to the achievement of the EU objectives congruent with a more sustainable energy system in 2030, emphasizing: greenhouse gas reduction, increased energy efficiency and an increased share of renewable energy. In order to reach the primary aim of this study, existing feedback tools have been identified and mapped and interviews with feedback tools providers have been conducted. The study is limited to three research areas: the practical functions of feedback tools, available technology and the use of feedback tools.The use of more efficient feedback tools will provide an increased success rate for energy management, which includes both behavioural changes and energy efficiency. According to the results from the interviews conducted for this study, an increased use and user frequency is important to utilise the energy management potential.