At the Division of Electricity at UppsalaUniversitythere are ongoing researches, including a research concerning turbo generators.Turbo generators produce a large share of electricity in the world; however they are costly mainly due to the fact that the cooling and ventilation that are needed to eliminate the excess heat from the generators are expensive. Turbo generators work with high efficiency and in this project, the main task is to simulate a generator while taking into account that the generator must be designed against self-oscillation, centrifugal force, exhaustion and heat. The turbo generator must be simulated without being too expensive and complicated.In this project, the dimensions of the turbo generator depend on the efficiency of it, and where the losses are in the generator. Furthermore, the optimum values need to be chosen with the help of the ACE simulation program. The report begins with an introduction describing the project followed by a task description that is dealing with the project.

When several production units provide a district heating network, water is pumped from different directions. When the flows from the plants finally meet in the network, the water can be completely still. These places are called zero flow zones. In district heating networks with several plants, which also have different supply temperatures, large and frequent temperature fluctuations can occur when the zero flow zones move. This may cause wear on the pipes, a phenomenon called low cycle fatigue.For this reason it is important to examine where and when zero flow zones that cause temperature changes occur.

The study is based on a new approach on how Swedish healthcare is supposed to be controlled and organized. There is a renowned administration problem within Swedish healthcare, which seems to be an obstacle to exploit the resources to the fullest. The latest venture within the healthcare system is patient involvement, where the patients become co-producers of their own care, which aims to both improve and make healthcare more efficient. A few wards in Sweden have implemented this new approach whereupon the study intends to discuss the effectiveness and efficiency in some of these.The study is restricted to three wards, whereof two of these are inpatient wards and the other one is an outpatient ward, within the medical clinic in Jönköping County Council, which has implemented the patient involvement approach in their daily work. The methodology for this study is qualitative in its nature where a time study of personnel time allocation and supplementary interviews with managing nurses on the wards have been conducted.

I ?Skolbarns hälsovanor? har sedan 1985 frågan ?Vad tycker du om skolan nu för tiden?? funnits med. Skoltrivseln minskar med åldern och till skillnad från många andra frågor skiljer sig pojkars och flickors uppfattning i denna fråga mest i den yngsta åldersgruppen, då flickorna i högre utsträckning uppger att de trivs mycket bra i skolan (Svenska barns hälsovanor, FHI 2005). I den här studien undersöks hur åtta 12-åriga svenska skolflickor i en västsvensk småstad upplever sin skolvardag. Min metod har varit att fastställa deras KASAM-värde genom en enkät (Margalit & Efrati, 1996) baserad på Antonovskys frågeformulär för att mäta Känsla Av Sammanhang (Antonovsky, 1987)och sedan intervjua dem enskilt om trivsel, flow och beröm i skolan.

To meet the needs and demands of the costumer, accurate information about how much is available in stock is necessary. When the information in the system does not match the physical inventory, inventory inaccuracy occurs. Inventory inaccuracy is common among companies and may contribute to increased labor cost, excess inventory, production disruptions, waste of time, late deliveries, poor service and lost customers.The purpose of this study is to identify contributing factors to inventory inaccuracy for business with outdoor storage. The study also aims to investigate how efficiency factors can reduce the inventory inaccuracy for business with outdoor storage.A case study was conducted to answer the purpose. A company in the steel industry was chosen to examine inventory inaccuracy on business with outdoor storage.

IT-företaget Medius tillhandahåller en produkt för ärendehantering, Medius Flow. I denna produkt finns ett visst stöd för dokumenthantering, närmare bestämt en möjlighet att klassificera dokument och lagra dem via Medius Flow. En av Medius kunder har efterfrågat mer funktionalitet och möjligheter att kunna sätta rättigheter på dokument, alltså bestämma vem som ska ha tillgång till ett specifikt dokument.Examensarbetet har gått ut på att undersöka olika lösningar för att implementera dokumenthantering i Medius Flow, utvärdera dessa och sedan implementera den lösning som verkar vara bäst.Efter att en kundintervju utförts framkom krav på systemet i form av bland annat utökade rättighetsfunktioner, möjlighet att skapa arbetsflöden och att man lätt ska kunna hitta dokumenten.Tre olika lösningsförslag togs fram. Det första gick ut på att vidareutveckla den dokumenthantering som finns i Medius Flow idag. Det andra gick ut på att använda sig av ett tredjepartsdokumenthanteringssystem och sedan bygga en integration mellan Medius Flow och detta system.

SammanfattningDetta arbete handlar om att kritiskt belysa de aspekter av undervisning som är centrala för mig som pedagog. Som lärare vill jag nå fram till eleven, jag vill att eleven ska ha möjligheten att vara kreativ och att få uppleva det tillstånd som kallas flow.Arbetet har utgått från de upplevelser jag fick av musik när jag var yngre, då tänkte jag inte i termer och begrepp utan upplevde - utan allt för förutfattade meningar. Nu när jag är lärare känner jag ett starkt behov av att identifiera vad jag då upplevde för att kunna ge mina elever en liknande kick av musik. Identifieringen har lett fram till detta arbete, jag kunde inte sätta ord på vad jag sökte men visste ändå intuitivt vad det var jag ville åt. Så småningom kom orden på plats: jag har i mitt identifieringsarbete kretsat kring kreativitet, flow och undervisnings metoder.

Every year, KTH participates in the Shell Eco Marathon, a competition whose goal is to design a vehicle that can go as far as possible using only the equivalent energy of one liter of petrol fuel. This year, one of KTH?s contributions to this race is the Agilis prototype; a car powered by a uniquely configured HCCI-engine developed at the university. The engine is dependent of several subsystems in order to work properly, among other, systems for cooling and lubrication.Combustion engines are in need of a cooling system that reduces the heat developed during the combustion. In general, two main types of cooling systems are employed; either air cooling, where the outside of the cylinder is exposed to a flow of the surrounding air, ore water cooling, where water flows in tubes around the engine, and the heat are transferred by the water to the surrounding air through a heat exchanger.The purpose of the lubrication system is to prevent the friction that builds up in the interference between moving parts in the engine.

Detta arbete a?r en sja?lvstudie i att utveckla improvisation pa? saxofon. Syftet a?r att utforska hur det a?r mo?jligt att uppna? en niva? av frihet i det improviserade spelet. En grundtanke som presenteras i inledningen a?r att all musik egentligen kommer ur improvisation.

I am a practising classical soprano. After more than 20 years of professional singing, I re-trained my voice according to principles of the old Italian school of singing. In this essay, I examine the origins and priciples of bel canto, with special focus on appoggio and chiaroscuro, two key ingredients in the bel cantao tradition. I explore the relationship between science and the craft of singing, and what modern voice science has to say about the efficiency and health aspects of this technique, I also describe the profound effect it has had on me as an artist..

SUMMARYInventory of raw materials holds an important role in companies within the manufacturingsector. The inventory works as a buffer that secure the supply of materials to the productionunit. The aim of the inventory is to ensure that the company is able to meet the customers?demands despite fluctuations and variations in the material flow. The size of the warehouseand the layout are physical limitations for the quantity of articles that can be stored.

My bachelor?s dissertation concerns the creation of a proposal for interior decoration of the Boland High School?s canteen. I have been in contact with personnel, students and the school principal through the duration of the project. In the end, substantive changes of lighting, interior decoration and movement were proposed for the canteen. In the proposal I have focused on accentuating the school?s profile, on creating smaller spatial configurations within the larger configuration of the room, lowering the noise level, creating a good movement flow, increase the number of seats and creating a pleasant environment in which to eat..

I transportbranschen finns behov av ett gemensamt och standardiserat mått för mätning av effektivitet och trots avancerade IT-system och moderna verktyg råder det idag avsaknad av detta. Transportföretagen behöver inte bara ta fram egna, interna mått utan också accepterade och vedertagna mått som kan användas för att kommunicera med kunder, myndigheter och andra externa intressenter..

There is a great need to reduce nutrient leaching from arable land into lakes and oceans. By using several different types of models it has previously been possible to describe nutrient losses in a catchment area with a minimum unit of sub-catchment level. At present, it is instead desirable to model a smaller catchment with an opportunity to re-connect the results to the corresponding fields in the catchment. Such models already exist but they are not fully able to properly describe Swedish conditions and land characteristics in our region.With the approach of creating such a model, SLU has developed a project with this work as its first stage. The model is expected to be created under the working name SWE-model which stands for Soil Water Environment and is in this first stage supposed to apply the SOIL model in catchment scale. During the procedure to describe the first step in the process of developing such a model adapted to Swedish conditions and which works in the catchment scale with an area of about 10-30 km2, focus has been set on calculating the transport of water flow from different hydrological response units. Regardless of the processes occurring in the soil after the water has been added, it is assumed that all the water which flows from each simulated unit is drained.In the first step the hydrologic response units were identified based on land use and soil type in the study area. With the help of a script with functions that retrieve and transform data, certain units were chosen for simulation. The script was also created in this project. Finally, the model results were aggregated and summarized for each unique unit, for each sub-catchment, and also for the whole catchment.From the results it is possible to see similarities in the flow dynamics between modeled and measured data. The efficiency coefficient has been calculated to correspond to the mean of the measured values for the whole simulation period. With an automated calibration process the model should be able to perform better. The volume error gives an indication of overestimation from the model..

Through the growing use and availability of information technology the dependency of Internet is today increasing. Internet makes ways for a more mobile business communication that cost less. One of the latest applications of Internet technology are intranet and extranet. I have asked myself the question how intranet and extranet can affect companies efficiency and competitive advantage. In order to answer this question I performed a case study at Ericsson and ABB.