In order to be a good teacher according to preferences from outside the school area, there are many different voices to listen to. The different roles that are assigned for teachers are colliding with the latest research from the pedagogical institutions and therefore the role as a teacher of today is in a complex state of mind. Somewhere, between the traditional role of teaching and the moderating ideal image, reality is revealed in the ambivalent role of the teacher of today. In this pedagogical essay on advanced level we are focusing on obstacles that are hindering the moderating teacher?s role, to be fully developed in the classroom.

The dissertation were performed on SP, Technical Institute of Sweden. The dissertation were carried out on the measurement technical department, this dissertation is a part of a bigger project, project ClampCal. One of SP?s returning assignments are flow-measurement. When flow-measurement is performed, the flow has to be stopped so that a meter can be installed in the pipes where measurement is going to take place. At every stop there is time delay in the flow which causes the customers to loose money. This is why SP wanted to find a better solution so that measurement can be done without any stops in the flow. Usage of a so-called Clamp-on meter was considered, but since the measurement uncertainty is too large it takes some investigation on the parts where the largest uncertainties occur and thus find a solution that can diminish the uncertainty as much as possible. The parts that were considered to have an opportunity to reduce measurement uncertainties were the fluid temperature, its characteristics and the pipe geometry and its characteristics. For the fluid temperature a Pt100-sensor with four different radii for various pipes was used.

The purpose of this study is to examine and explain why three Swedish public libraries failedin their ambition to act as information services for small and medium-sized firms (SMF). To support this purpose two major assumptions are made:1) Public libraries who plan to run this kind of "business" must act with the same means as "professional" services.2) The service must be adjusted to the information needs of the customer.Based on these assumptions sixteen factors which are crucial to the "success" for this kind of service are presented.Applied to the information services of Lidkoping, Sölvesborg and Västervik, these factors reveal a number of shortcomings and mistakes made by the libraries.To understand this result these information services are seen as parts of a traditional Swedish public "library-thought". It is shown that, fundamental ideas in the way the public libraries are defined, like the responsibility to act in a neutral and democratic way, also characterised the three information services.These ideas together with the opinion of SMF as a "rational" information-consumer resulted in information services who did not meet the information-needs and information-behaviour of SMF..

This examination work is performed at the institution of industrial economy and production at Jonkoping technical university, for JELD-WEN Door Solutions plant in Forserum.Today the focus in the company is on to reduce their inventories binding of capitals as well as inventory of products and that includes to get a good control of the supply and handling of material which is of great importance.JELD-WEN Door Solutions is one of the worlds leading producers of windows and doors and the head-office is located in Oregon, USA.A great number of wooden doors are manufactured by the company in varying of constructions, classifications and performance.The production of the plant in Forserum has a project- and customer focus manufacturing where only internal doors are produced. The overall market they are concentrated on is to different institution such as schools, hospitals etc.The purpose of this work is to investigate possibilities to improvement of material- and production control at JELD-WEN. The report will handle the master production schedule to and from the production divisions within manufacturing industry. Focus will be on the way for information- and material flows from arrival, transport within the company and further on to customers.Further a map of the flow was performed which gave a clearer picture of the connection between the flow of information- and material for the manufacturing process. On the basis of the mapping of the flow, the group discovered that the flow of material had some improvement potential.

Human Computer Interaction (HCI) handlar om att utveckla produkter med god användbarhet. Med användbarhet menas att system ska vara lätta att använda och lära. Jakob Nielsen är en av förgrundsfigurerna när det gäller riktlinjer för hur detta ska uppnås. Han har utvecklat tio kriterier som kan användas för att ett så bra system som möjligt ska kunna utvecklas.På senare år har forskare börjat se till, inte bara tekniska aspekter utan även till de känslor som användaren kan tänkas uppleva under det att denna interagerar med en webbsida. Ett flertal forskare har utvecklat teorier kring begreppet Flow.

Detta projekt genomfördes i samarbete med akustikern Erling Nilsson på företaget Ecophon i Hyllinge. Uppdragsgivare var musikproducenten Magnus Ågren som äger studion Flow Music i Malmö. Uppgiften var att förbättra akustiken i ett av Flow Musics studiorum. Rummet hade före projektet en hård och obehaglig akustik. För att komma fram till ett åtgärdsförslag specificerades först hur enskilda akustiska egenskaper skulle påverkas för att ge ett så bra resultat som möjligt.

The report is about efficiency of a current production group where there is no clear production flow and there are some buffers between the operations. The efficiency is done with the help of a tool that is calledWork process of flow production which is used by Atlas Copco CTO. The most obviously results are that the lead time drops from 25 hours to 425 minutes and that the balancing loss decreases from 85 % to 8 %. The report focus on decreasing transports, decreasing buffers, more reliability in lead time and quality. And a more stimulating labour content for the workers is another result..

The goal of this study is to examine what five teacher?s impression of the teacher?s role is in their previous years. How important the ?joy at work? is in relation with the educational progress? And what aspects that contributes to the? joy at work? and what obstacles that stops them. The essay will also go through the concepts of a teacher role, with connection to the theoretical perspectives of Csikszentmihalyi?s Flow and Antonovsky?s Salutogenesis (KASAM).The method I used was interviewing five teachers and I used Larsen?s chapter of ?content analysis? as a basis, I also used Flow and KASAM as theoretical references in my analysis.

In order to be a good teacher according to preferences from outside the school area, there are many different voices to listen to. The different roles that are assigned for teachers are colliding with the latest research from the pedagogical institutions and therefore the role as a teacher of today is in a complex state of mind. Somewhere, between the traditional role of teaching and the moderating ideal image, reality is revealed in the ambivalent role of the teacher of today. In this pedagogical essay on advanced level we are focusing on obstacles that are hindering the moderating teacher?s role, to be fully developed in the classroom.

This thesis examines a possible control strategy to minimize flow fluctuations in Uppsala?s district heating system. High variations in flow rate may lead to complications caused by hydraulic constraints in the district heating system. These complications, such as inadequate pressure and temperature levels, increase the risk of heat delivery failures. It is therefore important to avoid such situations both for the producer and for the customers.Typically, the forward temperature is controlled by using a rough correlation with respect to the outdoor temperature.

The area of Lycksabäcken northwest of Lycksele is a national interest of natural conservationbecause of its geological values with many unique landforms. Many of these landforms indicatethat the deglaciation process in the area was very complex. However, the deglaciation process inthe area has not previously been fully understood. The aim is to add to the knowledge of theevents that took place during the last deglaciation. To do this, the glaciofluvial landforms in thearea were mapped by studying aerial photographs with a Wild Aviopreter and a five-day fieldinventory of key areas for the interpretation.

The report is about efficiency of a current production group where there is no clear production flow and there are some buffers between the operations. The efficiency is done with the help of a tool that is calledWork process of flow production which is used by Atlas Copco CTO. The most obviously results are that the lead time drops from 25 hours to 425 minutes and that the balancing loss decreases from 85 % to 8 %. The report focus on decreasing transports, decreasing buffers, more reliability in lead time and quality. And a more stimulating labour content for the workers is another result..

The aim of this study is to analyse the Swedish state´s ambition in achieving equality among its citizens. By studying the new urban policy introduced by the government in 1998 from a theoretical perspective the purpose of this essay is to understand the ideational dimensions in this policy project, in regard to established understandings about equality.The theoretical framework on which this study is based consists of two different parts. The first presents dominating models on welfare states, mainly focusing on the socialdemocratic welfare state. The second introduces influential theoretical views on equality, primarily discussing universalism and a differentiated equality view. It also presents theoretical views on how to understand the relationship between the state an its citizens.

Miljonprogram is a Swedish building program from 1964 to 1975. During that time about a million homes were constructed. Now, almost 50 years later, they are in desperate need of renovation. In order to fulfil the Swedish environmental objective to decrease energy consumption 50 per cent until 2050, considerable housing stock built under the Miljonprogram has to be renovated.Focus in this thesis is on the building services and theirs profitability that can decrease energy consumption in households build during the Miljonprogram. Building construction is not considered in this report.

In Sweden there are 1894 small-scale hydropower plants in operation, which together generate 4.3 TWh of electricity per year according to Swedish hydropower compound (SVKF, 2011). This corresponds to the annual consumption of about 860,000 Swedish households (based on an annual consumption of 5000 kWh). In the mid-1950s there were around 4000 small-scale hydropower plants in operation in Sweden before cheap fossil fuels and uranium competed with them, in the current situation only 1,894 of these are in use. If slumbering small hydropower plants once again would be taken into use and some new ones are built, we would be able to extract about 7 TWh of renewable electricity from these annually in Sweden, representing about 1.4 million households.The thesis intends to calculate and construct a hydroelectric power plant at the existing dam in Olofsfors and give suggestions on how the power station should run during the time that fish migration is greatest in Leduån.The turbine and generator to the station in Leduån at Olofsfors is designed by the height of the fall and the water flow through the dam. The turbine selected for the station is a CK-1000RM turbine with a 4-pole 250 kW generator from Cargo & power turbine Sweden AB, which is expected to deliver 1.2 GWh per year.