The Swedish Welfare Act § 4 says that "Animals must be kept and cared for in a good environment for animals and in such a way that promotes their health and allow them to behave naturally." Pigs in the wild spend 80% of their waking hours walking around and rooting for food, eating and exploring their environment with its snout. Fattening pigs in commercial farms spend 80% lying doing nothing. A lactating sow is lying down most of her day, and only 10-20% of the body surface is in contact with the Floor, so the pressure is high on these spots. Piglets lie down and paddle with their legs, with high liquid content in the tissues, several times an hour, to stimulate and massage the sow's udder. In the existing system, these individuals are held more often on Floors that are anything but inviting to sleep on.

Concrete Floors have traditionally had no problems with annoying vibrations. However with the demand for larger spans the Floors need to be made more slender with a higher degree of utilization and lower mass. Therefore new Floors may have problems with vibration serviceability. This thesis studies the vibration characteristics of hollow core slabs. The analysis was made in the finite element program Ansys. The hollow core slab was subjected to a varying force simulating one person walking across the slab.

This report presents thesis of Liisa Kokkonen in collaboration with Muovikilpi Oy.The project?s goal is to find a new construction for an existing lamp made of acrylic. Form and design retains and the manufacturing occurs at Muovikilpi Oy. The project contains the new construction and manufacturing of the lamp and also a proposition for a set with Floor and wall lamp.  The paper gives an outline of acrylic as material and how it reacts with light.

Inspired by how to sketch a light cone from a flashlight in a comic I wanted to create an armature carried only by its own light cone. To manage this challenge I sketched in an architectural and sculptural way, where I chose to ignore the function of the lamp as long as possible.As a result I developed an armature with a stunning shape, with an illusion that it was carried by its own light cone. It could be hanged on a wall, placed on a table, pushed against a ceiling or standing on the Floor.Depending of its size the light cone from the light source lightens up the surface and draws attention to the otherwise forgotten wallpaper or the undisposed statue in the darkness of the city..

Back problems are well noticed in horses, especially in horses used for riding. Kissing spines (impingement of the dorsal spinous processes) are often found at radiographic examinations of the thoracic spine. Kissing spines is a radiological diagnosis, indicating that parts of at least two adjacent dorsal spinous processes are in contact with each other. It is not uncommon that horses without clinical signs of back problems have some degree of kissing spines. It is therefore not sufficient with a radiographic examination to say that the cause of pain is kissing spines.

This report examines the possibility of developing a modular system for concrete homes that cancontribute to greater diversity of today's market. The issue was whether it ? from a competitive pointof view ? is possible to produce smart prefab modules that customers themselves can combine to avilla. The report addresses the question how the modules and wall panels should be designed for thegreatest variety of Floor plans.With regard to what is asked of the customer interviews where held for the purpose ofunderstanding concrete's popularity and elements of high value in their homes today. The answersfrom the interviews laid ground for four prototype homes which were made to demonstrate how theelements can be combined to achieve different types of houses..

This bachelor thesis has the purpose to visualize and document the air movementsprovided by different ventilation principles in an operating theatre. The visualizationwill be made as simple as possible in a physical model. The model and thedocumentation should be able to use in educational purposes.The study is based on the two most common systems for airflow, currently used inoperating theatres. The first principle is displacement ventilation in which the air issupplied at low velocity along the Floor. The second principle is vertical parallel laminarairflow in which the air is compressed like a piston from ceiling to the Floor.A review of literature resulted in the choice of size, design, and scale factor for themodel, as well as choices of ventilation principles and airflows.

The streetscape is a complex environment with a lot of different parts and users. If you look at the streetscapes main parts you have Floor, walls, roof and furniture. The Floor in the streetscape, the street, consists of the ground and the paving. It can be made of a lot of different materials with both architectonic and practical functions. The walls usually consist of the houses. They have a big influence on the streetscape depending on architecture, heights and widths.

This bachelor thesis has the purpose to visualize and document the air movementsprovided by different ventilation principles in an operating theatre. The visualizationwill be made as simple as possible in a physical model. The model and thedocumentation should be able to use in educational purposes.The study is based on the two most common systems for airflow, currently used inoperating theatres. The first principle is displacement ventilation in which the air issupplied at low velocity along the Floor. The second principle is vertical parallel laminarairflow in which the air is compressed like a piston from ceiling to the Floor.A review of literature resulted in the choice of size, design, and scale factor for themodel, as well as choices of ventilation principles and airflows.

This bachelor thesis has the purpose to visualize and document the air movementsprovided by different ventilation principles in an operating theatre. The visualizationwill be made as simple as possible in a physical model. The model and thedocumentation should be able to use in educational purposes.The study is based on the two most common systems for airflow, currently used inoperating theatres. The first principle is displacement ventilation in which the air issupplied at low velocity along the Floor. The second principle is vertical parallel laminarairflow in which the air is compressed like a piston from ceiling to the Floor.A review of literature resulted in the choice of size, design, and scale factor for themodel, as well as choices of ventilation principles and airflows.

This bachelor thesis has the purpose to visualize and document the air movementsprovided by different ventilation principles in an operating theatre. The visualizationwill be made as simple as possible in a physical model. The model and thedocumentation should be able to use in educational purposes.The study is based on the two most common systems for airflow, currently used inoperating theatres. The first principle is displacement ventilation in which the air issupplied at low velocity along the Floor. The second principle is vertical parallel laminarairflow in which the air is compressed like a piston from ceiling to the Floor.A review of literature resulted in the choice of size, design, and scale factor for themodel, as well as choices of ventilation principles and airflows.

This bachelor thesis has the purpose to visualize and document the air movementsprovided by different ventilation principles in an operating theatre. The visualizationwill be made as simple as possible in a physical model. The model and thedocumentation should be able to use in educational purposes.The study is based on the two most common systems for airflow, currently used inoperating theatres. The first principle is displacement ventilation in which the air issupplied at low velocity along the Floor. The second principle is vertical parallel laminarairflow in which the air is compressed like a piston from ceiling to the Floor.A review of literature resulted in the choice of size, design, and scale factor for themodel, as well as choices of ventilation principles and airflows.

This bachelor thesis has the purpose to visualize and document the air movementsprovided by different ventilation principles in an operating theatre. The visualizationwill be made as simple as possible in a physical model. The model and thedocumentation should be able to use in educational purposes.The study is based on the two most common systems for airflow, currently used inoperating theatres. The first principle is displacement ventilation in which the air issupplied at low velocity along the Floor. The second principle is vertical parallel laminarairflow in which the air is compressed like a piston from ceiling to the Floor.A review of literature resulted in the choice of size, design, and scale factor for themodel, as well as choices of ventilation principles and airflows.

This bachelor thesis has the purpose to visualize and document the air movementsprovided by different ventilation principles in an operating theatre. The visualizationwill be made as simple as possible in a physical model. The model and thedocumentation should be able to use in educational purposes.The study is based on the two most common systems for airflow, currently used inoperating theatres. The first principle is displacement ventilation in which the air issupplied at low velocity along the Floor. The second principle is vertical parallel laminarairflow in which the air is compressed like a piston from ceiling to the Floor.A review of literature resulted in the choice of size, design, and scale factor for themodel, as well as choices of ventilation principles and airflows.

This report is about how to decide which method is the most suitable as Floor covering at projectKlammerdamm in the centre of Halmstad. The covering has to be fire resistant and soundproof inorder to protect the wood structure and stop noise from traveling between apartments. There aretwo possibilities either traditional gypsum board or gypsum-based self leveling underlayment.The roads around the construction site are narrow. A regular twenty-five meter long truck has nopossibility to reach the site. The construction site is small and the storage area is limited.