When constructing a building, a number of aspects must be harmonized in order for it to fulfill requirements ? a building must fulfill requirements such a load-bearing, conservation of energy and a good indoor environment by means of, among other things, moisture proofing .Moisture problems in buildings can affect health negatively. As we are increasingly staying in indoors, demands on a good indoor environment are higher.This work starts with examining moisture problems in slab-on-ground solutions, and then links the various scenarios to moisture problems in a concrete slab of a real building. The building with moisture problems is located in Årby by in Borlänge and moisture damage was found in the slab at an apartment adjoining wall.By reviewing literature written within the field of moisture problem, making hand calculations and modeling in the program Comsol Multiphysics, judgments are made to find explanations as to why the rise of moisture occurred in the building in Årby by.Generally, the following guidelines may be used to reduce the risk of moisture problems in slab-on-ground constructions:Drying of construction moisture before laying the Floor material.Using draining layer beneath the slab, to prevent capillary suction.Using insulation under the slab, partly for comfort and to establish the temperature difference between the ground and the concrete slab.Avoid direct contact between the wood and concrete, due to degradation and fouling smells that normally occurs.If necessary, use additional vapor barrier.In addition to the above, there are various methods for moisture-proof and moisture-monitoring by design or by the method ByggaF suited for the entire construction process various events..

I samband med att intresset för att bygga högre trähus har ökat så krävs nya lösningar för att t.ex. kunna möta efterfrågan på stora öppna ytor och långa spännvidder. Träbjälklag med lång spännvidd har dock oftast svårigheter med att klara kraven på svikt och vibrationer. Ett nyutvecklat förslag på träbjälklag som förmodas klara dessa krav bättre än traditionella träbjälklag har varit utgångspunkten för detta examensarbete där syftet har varit att undersöka bjälklagets styvhet. Detta gjordes laborativt genom att bygga och testa en prototyp av det föreslagna bjälklaget och genom att en numerisk modell baserad på finita element metoden togs fram och användes för att studera hur olika parametrar påverkar bjälklagets styvhetsegenskaper.Bjälklagets design bygger på fackverksprincipen i primärriktningen och på balkverkan i sekundärriktningen.

The purpose of this paper is to examine how the arrival of class society is expressed in the social dance of high society during the second half of the eighteenth century. The study is based on the idea that culture and society develope in interaction; that changes in the economic, political and social life determine the cultural expressions as well. What I wish to examine is whether cultural themes from the developing bourgeois culture ? individualism, to be precise ? is expressed in the social dance during the second half of the eigthteenth century. // The study shows that public balls definitely gave people a chance to show off on the dance Floor in spite of social rank.

Authors: Linda Olsson & Dennis A?stro?m Title: A journey of discovery on the third Floor ? A case study in how juvenile agents in the municipality of Kalmar communicate with its young people Level: BA Thesis in Media and Communication Studies Location: Linnaeus University Language: Swedish Number of pages: 60Introduction: The participation amongst young people regarding political, democratic and society related questions is through an investigation confirmed not being high enough. Within the municipality of Kalmar, juvenile agents work as a link between young people and the opportunities that the municipality provides. To create this link with young people, communication is essential.Purpose: The purpose of this paper is to create an understanding of how the juvenile agents work in order to create and maintain communication with young people. The purpose is also to evaluate the result of the information campaign they executed in 2011.Methodology: For this paper we had a hermeneutic approach with an inductive viewpoint.

Deep litter is a system for animals kept in separate stalls, loafing and bedding in wind shelters. The litter can consist of different bedding, like straw and peat. The system is allowed to build over and to ensure optimal proportions it is necessary to add new straw regularly and to have good conditions. Important conditions are aerobic state, humidity, amount of organic substance and acceptable temperatures in the litter. The micro organisms are depending on temperature for their living conditions and to get the bottom layer in the litter to start burning.

There are two species of voles that cause damage in Swedish fruit production: the water vole (Arvicola terrestris) and the field vole (Microtus agrestis). Both species make the most damage during the winter season. The water vole makes subterranean burrows and cause serious damage by gnawing on the tree roots. The field vole seldom makes burrows and gnaws the bark at the base of the tree trunk. In recent years there have been several reports about increasing vole damage.

The company Olofsfors AB manufactures drive belts for forest machinery, known as ECO-Tracks, and abrasion-resistant steel and cutting edges for graders, excavators and tractors, known as Bruxite and SharqEdges. Manufacturing these products requires the steel to be heated and molded, then submerged in water and hardened. The water used in the hardening of steel is pumped to the process from pits below the Floor and then pumped back to the pit after it?s been used. Since the temperature of this water rises after being used to harden the steel the temperature of the pumping pit needs to be adjusted to maintain its setpoint of 21°C.

The company Olofsfors AB manufactures drive belts for forest machinery, known as ECO-Tracks, and abrasion-resistant steel and cutting edges for graders, excavators and tractors, known as Bruxite and SharqEdges. Manufacturing these products requires the steel to be heated and molded, then submerged in water and hardened. The water used in the hardening of steel is pumped to the process from pits below the Floor and then pumped back to the pit after it?s been used. Since the temperature of this water rises after being used to harden the steel the temperature of the pumping pit needs to be adjusted to maintain its setpoint of 21°C.

Today there is an increasing market for businesses concerning horses, and since we are already running such establishments we sort of speak already have a finger in the pie. Due tothe increasing competition and demands, new and more practical constructions have become a necessity. In doing this project I wanted to make a comparison between having a stable integrated with a manege and having both constructions kept separate. I wanted to compare different layout and make an estimate of costs to see which solution would be less expensive and better with regard to working environment. I will further also deal with different ventilation-systems andlight transmissions.

The purpose of this work was to see if it was possible to rebuild an old dairy house into a house fore sheep production. The goals fore the work was to see witch kind of production model was suitable, how the actual drawing would look like and witch kind of interior was needed. The building was built in the beginning of 1900. It is located on the mountain Kinnekulle in Sweden. It was a big production fore its time and hade about 60 dairy cows. It was a lot of hard work because the Floor was built by big stone blocks and it was very hard to rebuild when some more automatic solutions came fore handling all the manure. The idea of remaking the building came when we rebuilt the roof fore 5 years ago.

One year Master's thesis, Degree of master in Business and Economics, School ofBusiness and Economics at Linnaeus University, Management, 4FE10E SpringSemester 2014.Author: Johanna Björklund and Sarah Gustafsson.Mentor: Magnus Forslund.Title: Lean in the public sector - Potential barriers to a long-term Lean work.Background: Organizational changes are something that is constantly done inorganizations, and in the last decade, there has arisen a plethora of different changemodels. A reorganization that is popular among companies today is Lean. Lean is aconcept that was developed within the Japanese automotive industry, but has evolvedfrom the Japanese shop Floor and is now a concept that can be found in, for example,several Swedish municipalities.Purpose: The purpose of this study was to create an understanding of why the conceptLean may have difficulty getting a hold in the in the long term.Methodology: The study was done with a qualitative research approach and through anabductive approach. As we intended to create an understanding, of what potentialbarriers that may affect that a Lean work, in some cases, does not become a long-termcondition, it seemed natural to choose a hermeneutic approach to knowledge. Theempirical data collected via individual unstructured interviews, through a groupinterview, and by non-participant observations.

One year Master's thesis, Degree of master in Business and Economics, School ofBusiness and Economics at Linnaeus University, Management, 4FE10E SpringSemester 2014.Author: Johanna Björklund and Sarah Gustafsson.Mentor: Magnus Forslund.Title: Lean in the public sector - Potential barriers to a long-term Lean work.Background: Organizational changes are something that is constantly done inorganizations, and in the last decade, there has arisen a plethora of different changemodels. A reorganization that is popular among companies today is Lean. Lean is aconcept that was developed within the Japanese automotive industry, but has evolvedfrom the Japanese shop Floor and is now a concept that can be found in, for example,several Swedish municipalities.Purpose: The purpose of this study was to create an understanding of why the conceptLean may have difficulty getting a hold in the in the long term.Methodology: The study was done with a qualitative research approach and through anabductive approach. As we intended to create an understanding, of what potentialbarriers that may affect that a Lean work, in some cases, does not become a long-termcondition, it seemed natural to choose a hermeneutic approach to knowledge. Theempirical data collected via individual unstructured interviews, through a groupinterview, and by non-participant observations.

Stormwater run-off from surfaces such as roads or rooftops is often polluted with heavy metals and nutrients. Many of these substances can cause great damage in biota if they end up in the recipient. In Sweden constructed wetlands and ponds for treatment of stormwater are frequently used, since research has shown that these treatment ponds are reducing stormwater pollution considerably to a low cost. The knowledge of these pollutant removal mechanisms and how follow-up and assessment of the ponds should be performed is still limited.To determine the pollutant removal efficiency of the stormwater ponds it is recommended that flow-weighted water samples are collected from both the inflow and the outflow of the pond. This method demands considerable resources of time and money for installations and analysis.

The company Olofsfors AB manufactures drive belts for forest machinery, known as ECO-Tracks, and abrasion-resistant steel and cutting edges for graders, excavators and tractors, known as Bruxite and SharqEdges. Manufacturing these products requires the steel to be heated and molded, then submerged in water and hardened. The water used in the hardening of steel is pumped to the process from pits below the Floor and then pumped back to the pit after it?s been used. Since the temperature of this water rises after being used to harden the steel the temperature of the pumping pit needs to be adjusted to maintain its setpoint of 21°C.

Syfte: Urininkontinens är ett folkhälsoproblem som berör åtminstone 500 000 svenskar.  Studiens syfte var att kartlägga sjukgymnastisk behandling med bäckenbottenträning, vid urininkontinens hos kvinnor, på primärvårdsnivå i Uppsala län. Metod: Studien hade en kvantitativ och deskriptiv design. Data samlades in via en webbenkät som skickades till alla sjukgymnaster på primärvårdsnivå i Uppsala, både offentligt anställda och privata sjukgymnaster med landstingsavtal. Resultat: 96 sjukgymnaster tillfrågades om deltagande i studien varav 65 besvarade enkäten (68 %). Drygt hälften av respondenterna behandlade med bäckenbottenträning. Antalet patienter som behandlades var lågt. Det var få patienter som remitterades från andra vårdgivare.