The data acquisition system COMET developed by Saab AB contains a unit for signal conditioning and A/D conversion, called KSM. The varieties in signal conditioning constitutes of a number of specific PBAs and maintenance as well as reconfiguration of these are complicated not to mention costly. This thesis has aimed to investigating whether the signal conditioning circuits can be replaced by a general purpose, programmable solution. If so, how can this be done? The development has been carried out by evaluating ideas through the use of a laboratory environment and has resulted in an analog design for laboratory purpose.

Denna rapport omfattar ett examensarbete på 22,5 poäng. Examensarbetet har utförts inom ämnet integrerad produktutveckling vid Högskolan i Skövde tillsammans med Jai Designpartner AB. Målet med arbetet var att utveckla ett fällbord som enkelt kan fällas ihop, ha en längre livslängd och lägre vikt än företagets tidigare fällbord. Samarbetet genererade ett fällbord som inte följer de generella principerna av infällning av bordsben. Resultatet blev ett fällbord med minimal klämrisk, med en längre livslängd då infällning av bordsbenet sker med en vridning och med en mindre vikt då ramverk kan elimineras..

Följande projektarbetet har resulterat i en ny webbplats åt verkstadsföretaget Löfman & Co Verkstad AB,resultatet är sprunget ur WordPress och projektet vilar på en teoretiskt grund av läsbarhetsteori samtbeprövad erfarenhet kring ämnet responsiv design. Projektrapporten innehåller både information gällandedet teoretiska ramverket samt de slutgiltiga tekniska lösningarna som implementerades på webbplatsen.Två kvalitativa undersökningar på företagets gamla webbplats har bidraget med ytterligare underlag förskapandet utav företagets nya webbplats.. Utöver det ha en viktig del i utvecklingen gjorts av den ständigakontakten med kunden. Projektresultatet är ett bevis för att det finns en arbetsmarknadsmässig funktionför de studenter som läst Visuell Kommunikation och Design vid Karlstad Universitet..

e-Me projektet är ett innovativt forskningsprojekt där tillvägagångssättet co-design använts för att framställa en elektronisk assistent. e-Me realiserades i januari 2007 som ett pilotprojekt vid Högskolan i Borås. Den elektroniska assistenten är en artefakt som ska förenkla det administrativa och elektroniska livet för studenter. Målet med den här uppsatsen var att öka förståelsen kring co-designs grundidé, praktiska moment samt de kritiska roller som kan urskiljas i co-designprojekt. Studien är av intresse för alla som vill utvidga sin kunskapsbas inom både co-design samt e-Me.

Lower energy use in buildings is a result of increasingly stringent energy requirements across Europe. When conventional district heating technology is used in areas with low energy consumption heatlosses do not fall even though the amount of energy delivered is reduced. This reduces income for thedistrict heating company. To maintain their economic viability the district heating companies? majorchallenge is to implement new solutions that minimize heat loss.

This thesis was carried out at Atlas Copco Tools and Assembly Systems. The purpose hasbeen to develop a design tool to be used for development of new electric motors for AtlasCopcos electric nutrunners. The focus of the thesis has been to increase productivity bydecreasing the power losses in an electric tool. The productivity is defined as themaximum number of tightenings a nutrunner can perform without becoming too hot.Before starting the development of this design tool an existing Matlab script, whichcalculates the losses in a slotless electric motor, has been studied and modified torepresent the real losses in a better way. The modification has been made by performingpractical studies of different losses and then adjusting existing parameters in the Matlabscript.Because design changes in one part of a mechatronic system can lead to a decrease inperformance of another part the choice of parameters that can be changed has been madeso that other parts of the system is affected as little as possible.A study of the existing tools efficiency during an entire tightening has been made toincrease the understanding of when and where the different losses appear and to comparethe modified Matlab script with the measured values.The design tool was formed so that it executes the Matlab script, that calculates thelosses, for a number of different design options and stores the alternative which producesthe least losses.

Balcony Art is an idea for a new kind of furniture group for those who have limited space on their balcony. This report will discuss conceptual and part of primary construction of the chair and table for use on balconies, how the products developed from an idea to primary, preliminary products.In the conceptual design part, the report will discuss how product requirements and specifications are developed and how these controls the design.In the primary construction, the report will discuss the products journey from sketch to functional CAD models and how the products of individual parts are designed and how the durability calculations affect the design..

This study investigates the planning process of a university library building. The study s major concern is the cooperation of the main participants in this process: librarians, architects and representatives of university colleges and universities. First the authors present the readers with an overview of the litterature concerning this subject. Then follows a presentation of the three case studies. The authors have interviewed representatives of the three different occupational groups at three different library-building projects: Malmö University, Halmstad University College and the department of social- and behavioural studies at Lund University.

Vegetation is a much appreciated element in our outdoor environment that has many advantages as well for the climate as for people?s health. However in some types of environments vegetation may be problematic. Especially in urban areas with limited space, solid surfaces, pollutions, and warm and dry climate. In these environments vegetations may have difficulty surviving and moreover it may have a negative impact on the environment around it.

The computer consultant company Create in Lund AB wishes to facilitate their invoice routines, as it at present is required that the administration finds and compares information from two different systems.The purpose of this thesis is to develop an invoice management system that simplifies the invoice management process for the administration at Create. During the development of the system, I have chosen to follow the software development process Unified Process and also tried to find design patterns that can be applied to the integration.The result of my project is a self-contained application developed using the Java programming language that communicates with the databases of the other two systems and presents relevant information to the user as a set of invoices. Of the 23 design patterns I studied, I used four of them in the invoice management system. However I couldn?t find any connection between any design pattern and the integration of systems.

The thesis was performed at the lighting company Zpecta AB. Zpecta needed to develop alternative attachment of their LED-luminaire Capella. Today Capella attaches in metal ceilings with four magnets. Zpecta got indications from their customers that there was a need for other attachments. The purpose is to determine the customer?s requirements and the interfaces that are considered for Capella.During the thesis, Capella was only on the market for testing and evaluation.The thesis was initiated to create a specification.

The goal of this thesis is to design an attachment between a duct and a pod. A pod is what could be compared to an outboard engine for larger vessels. The pod is placed on the outside of the ship?s hull and can rotate 360 ?. A duct is a large steel ring that can be placed around the propeller on the pod to increasethe propulsion force of the ship in lower velocities.

Stadsodling kan fungera som mötesplatser i staden för att främja en social samvaro och en socialt hållbar utveckling. Syftet med examensarbetet var att studera hur detta kan se ut på olika stadsodlingar i Göteborg, och hur deltagarna själva upplever odlingen som mötesplats och hur en gemenskap kan se ut. Bakgrunden för examensarbetet ligger i ett personligt intresse av odling i staden och hur människan tar sin stad i anspråk. Vad gör människan i sin stad? Intervjuer har genomförts med deltagare från sex olika stadsodlingar, på olika platser i Göteborg.

Immersion is a construct that measures how deeply engrossed a user is with any mediated situation. In the field of game design, immersion is a significant aspect of what makes a game enticing, and as such it is of pivotal importance to create and maintain it to keep the player's mind off the real world while inside the confines of a game framework. According to the GameFlow theory, it is one of seven key tenets of evaluating and implementing a successful game design. Yet, certain multiplayer online games are designed in a fashion that in some cases seem to break immersion, where the player is frequently put out of action, sometimes for minutes on end. In this study, using online questionnaires, we discover that players, despite claims otherwise, seem to be in several ways affected negatively by this breaking of immersion.

Immersion is a construct that measures how deeply engrossed a user is with any mediated situation. In the field of game design, immersion is a significant aspect of what makes a game enticing, and as such it is of pivotal importance to create and maintain it to keep the player's mind off the real world while inside the confines of a game framework. According to the GameFlow theory, it is one of seven key tenets of evaluating and implementing a successful game design. Yet, certain multiplayer online games are designed in a fashion that in some cases seem to break immersion, where the player is frequently put out of action, sometimes for minutes on end. In this study, using online questionnaires, we discover that players, despite claims otherwise, seem to be in several ways affected negatively by this breaking of immersion.