Sök:

Sökresultat:

606 Uppsatser om Flaw parameters - Sida 39 av 41

ATP bioluminescence to establish a test procedure for hygiene testing of liners and tubes on farm level : an investigation of the effect of ageing on the hygienic status of rubber liners and tubes

When rubber equipment in a milking system ages, physical and chemical deterioration occurs and cracks, crevices, as well as deposits of organic and inorganic material is formed on the surface. Bacterial colonization can accumulate, especially on ageing rubber equipment and if the cleaning procedure is not functioning properly. Formation of biofilm in milking equipment could in turn cause bacterial contamination of bulk tank milk. ATP bioluminescence is a fast and easy way to determine the hygienic status of a surface based on its ATP content, and results are given in relative light units (RLU). The method measures both bacterial contamination as well as residues from other organic material.

Ruttplanering : Retursystem för pantade PET-flaskor och aluminiumburkar

This report is the final part within our education, Industrial Organization and Economy focusing on Logistics and Management at Jönköping School of Engineering. The aim with this report is to coordinate recycle drives for deposited aluminum-cans and bottles collected from grocery stores within Jönköping county and locality.In the present situation both aluminum cans and bottles filled with drinks are distributed to the grocery stores by the brewery?s own distributers. At the same time as they supply the drinks they also discharge the grocery stores units with restored aluminumcans and bottles. To make it easier for the grocery stores to handle the goods in the future, all distribution of drinks ought to be directly delivered to the grocery stores own separate central warehouse.

Green feed in the marine fish farming : how to communicate water benchmarks to stakeholders

Global catch fishery is said to been oppressed to its limit (Boyd & Schmittou, 1999), further implying aquaculture might be the only solution to the world demand for fishery products. The applied term aquaculture in this paper refers to the one used by NOAA (2008); breeding, rearing, and harvesting of plants and animals in all kind of water environments, including but not limited to ponds, rivers, lakes, and the ocean. According to Shamshak & Anderson (2008, p. 74) aquaculture has over the past 20 years been the fastest growing food sector with an average annual growth rate of 8.7%. It further represents approximately 37 % (Shamshak & Anderson, 2008, p.

The role of mast cells and mast cell mediators in the development of atopic dermatitis in a mouse model

Atopic dermatitis (AD) is a complex, often lifelong allergic disease affecting around 10 % of both dogs and humans. The hallmark symptom is severe pruritus, causing a lowered quality of life. Mast cells (MCs) are known to play an important part of the immunopathogenesis, promoting a faulty T helper cell type 2 (Th-2) response which follows by a production of specific immunoglobulin E (IgE) antibodies towards environmental allergens (Ag). To further investigate the role of MCs and its mediators in the progression of AD, a low-calcemic vitamin D3 analog (MC903) was used to induce AD-like symptoms locally on the ears of two different knock-out (KO) mouse strains. The first strain was Wsh-/- mice deficient in MCs.

Gremmeniella abietina-epidemin 2001 : har skogen återhämtat sig?

The fungus Gremmeniella abietina causes damage to conifers that can lead to tree death. In 1999 and 2001 the pathogen caused severe attacks in Sweden, where about 500 000 ha of pine forest were affected. Trees of all ages were attacked, but mainly forests between 30-60 years that were ready for their first commercial thinning. After recommendations from the forest agency, sanitary fellings were made to trees that had more needle loss than 85%, a total of about 50 000 ha. Economic losses have been estimated to more than one billion SEK.

Nutrient efficiency in Swedish dairy cows fed total mixed rations or partial mixed rations

The relatively poor economy in European dairy farming might be improved from efficient feeding systems and dietary management. Increasing herd sizes and transition to loose housing systems in Sweden, increases the possibilities for other feeding systems than separate feeding that is the traditional feeding system in Sweden. Other possible feeding systems are partial mixed ration (PMR) and total mixed ration (TMR), where the TMR system sometimes is associated with overfeeding and thereby increased environmental impact and high feed cost. Diets providing nutrients above or below animal requirements are considered as unbalanced, which in turn are associated with reductions in health, fertility and milk production. On the other hand, a balanced feed ration improves feed efficiency, nitrogen utilization and profitability.

Chemical and sensory analyses of juice, cider and vinegar produced from different apple cultivars

The interest for locally produced food is increasing due to consumer concern about the environment, distrust of industrial foods and a demand for high quality products. Apple is the predominant fruit crop in Sweden, and by processing apples into cider and vinegar, these products could significantly contribute to the development of the market of local foods.In this study different yeast types and different bacterial cultures were evaluated for their suitability in cider and vinegar production from cloudy apple juice. Ten apple cultivars (Aroma, Baldwin, Belle de Boskoop, Bramley, Cortland, Gravensteiner, Ingrid-Marie, Jonathan, Rubinola and Spartan) were also evaluated for their suitability for production of juice, cider and vinegar. Chemical analyses including total soluble solids, titratable acidity and total phenols were performed on the products along with sensorial evaluation by taste panels.The yeast strains were shown to have an effect on fermentation rate and the resulting content of total phenols in ciders fermented from cloudy apple juice. Dry commercial starter strains gave a higher appreciated cider compared to cider that was spontaneously fermented, and the ale yeast Safale S-04 was concluded to be the most suited for fermentation of cloudy apple juice.For vinegar production, the bacterial culture had an effect on TSS, but not on any other chemical or taste characteristics.

Stålbalkars bärförmåga vid intryckning - orsakad av lokal momentbelastning

This master thesis deals with steel girders subjected to patch loading caused by concentrated moments. There exist no good methods to calculate by hand the ultimate resistance for this load case. In ?tunnplåtshandboken?, (Handbook for sheet metal, which is published by SSAB), one calculation method is presented. It?s however fairly difficult to use, because of many calculation steps and many graphs.

Förändras mjölkens proteinsammansättning i separata juverdelar i samband med höga celltal (SCC)? :

Today the milk production per cow is increasing but the milk delivered by the Swedish farmer contains less amounts of fat and protein than earlier. The contents have decreased since 1993. In average the milk contain 4,2 percent fat and 3,4 percent protein. Earlier the fat content in milk was important. Nowadays the dairy?s attention has turned to the milk?s valuable proteins, principally the caseins, which have a considerable nutritional value and are important for several dairy products like cheese and yoghurt.

Omvårdnadsrutiner för katt med astma

Feline asthma is a condition very similar to the respiratory disease affecting humans. It is causing, among other things, a constriction of the bronchial airways, an increase of mucus production and damage to, or erosion of, the epithelial membrane. The symptoms occur intermittently and do, in most cases, evolve during a long period of time. The aim of this essay was to investigate whether there are any nursing routines for feline patients with asthma in animal clinics and animal hospitals in Sweden, and if so, to compare similarities and differences. A literary study of research material also led to a suggestion of how to form a nursing routine for this type of patient.

Bristidentifiering & effektivisering av materialförsörjningen på SAAB Microwave Systems

 Saab Microwave Systems (SMW) is a business unit within Saab AB that manufactures and develops different types of radar- and sensor systems for naval, airborne and ground based forces as well as within the market for civil security. In addition to the manufacturing of radar and sensor systems they also provide different types of service concepts. The business unit has 50 years of experience within the area of developing radar systems and is considered to be one of the market leaders. When applying an assemble-to-order production strategy with products at this level of cost price the product lead-time is vital and becomes an important part of the strategy within marketing and sales. Within SMW there is a new department called Supply Management (SM) that provides the supply of incoming and outgoing material. Within SM there are four sub-departments working with activities such as planning, purchasing, receiving inspection, storage and distribution.

Hydrolys av primärslam för förbättrande av biologisk fosforreduktion vid behandling av hushållsavloppsvatten [Hydrolysis of primary sludge for enhancement of biological phosphorus removal in household wastewater]

Hammarby Sjöstad is a new district of southern Stockholm built with focus on reduced environmental impact by recirculation of materials and sustainability. The environmental goals aim to cut the water consumption by half and a separate storm water treatment. Thus, the wastewater will be more concentrated and will originate from the households only. The Sjöstad project includes the idea of a local treatment plant for the household wastewater. To evaluate this possibility, Sjöstadsverket, an experimental treatment plant was constructed.

Förluster av nedströmsvandrande fisk vid turbinpassage : En fallstudie för att främja den småskaliga, såsom storskaliga vattenkraften

The expansion of the Swedish hydro power has contributed positively to the reduction of the environmental impacts from the fossil fueled power production. In the same time the extensive expansion has been proved to cause negative ecological and local environment impacts of a stream. This, in turn, has been affecting the biodiversity and fish stock negatively, which has been reduced. One of the underlying problems is the lack of possibility for the fish to pass the plants, but it is also directly correlated to the mortality rate of the fish passing through the turbine, which this study is investigating.The mortality rate has been computed for three different locations in Sweden, Untra, Tännfallet and a third one whose location is confidential, and is denoted as Case 1, 2 and 3. The model used to calculate the mortality rate in this investigation is based by existing blade strike models and knowledge and are investigating the death due to mechanical injuries from collision with a runner blade in the turbine.

Stress test methods : a potential approach to hurry up shelf-life tests on oat products

The aim of this Master?s thesis was to find out more about the delimiting quality- and shelf-life parameters over time for liquid oat-based products. According to that, to present applicable subjective and objective shelf-life test approaches at accelerated conditions. The study aimed to gain a deeper knowledge concerning the general and accepted way of performing accelerated storage tests. This study focused especially on products, which suffer from quality failure caused by oxidation, such as liquid oat-based products.

Islastens inverkan på brottsannolikheten för glidning och stjälpning av betongdammar

There are many old dams in Sweden and, since few dams are constructed today, the main task in risk assessment on the existing dams is often to reduce the risk of failure. RIDAS (Swedish Guidelines on Dam Safety) is used when designing new dams and assess the existing ones. The guidelines include stability requirements for different failure modes, e.g. overturning and sliding, which imply that the load effect from e.g. uplift and ice load need to be less than the resisting loads or moments.

<- Föregående sida 39 Nästa sida ->