Horseracing is frequently referred to as the engine behind all horse activity in Sweden and it can be divided in to two main branches: harness racing and thoroughbred racing (HNS, 2008). Jump racing is a part of the thoroughbred racing and the jump racing is characterised by jumps on the racing track. Jump racing has been a part of the Swedish horseracing for over hundred years, but it has in recent years suffered from low economic profitability and been threatened by discontinuance (ATG & SG, 2008). Svensk Galopp, who is governing the horseracing in Sweden, has decided to increase the importance of jump racing. A workgroup was created for this purpose, and as a result of their work a strategy for the jump racing is supposed to be delivered in April 2009 (pers.

With 25 countries being members of the European Union, travelling and working in other countries has become significantly easier. But what happens when one culture meets another one in a work situation? More specifically, what happens when French and Swedish cultures meet? Would a Swedish manager lead his team in the same way as a French one would?My question is: What is management philosophy like in Sweden and France? Do the two philosophies resemble? And if not, in what ways do they differ?The purpose of this essay is to find out, by looking at the material used at management courses, what the Swedish management philosophy really is. And then look at whether there are any similarities between this philosophy and the French one. The idea is to examine how management is being taught in both countries, by looking at what management litterature is used at some of the highest ranked management schools in Sweden and France.There have been numerous ethnological studies concerning nationality and cultural behaviour, one of the most important ones is the study done by Hofstede.

The purpose of this degree project is to give an overview of the planning system of four Swedish forest companies. The involved companies are ATA TIMBER, SYDVED, BERGS SKOG and VIDA SKOG. The study is based on information from a literature study and by interviews with personals from the four companies. Each company is described to get a better insight of the companies work and what potential they have. The description of the planning process comes after that. The companies are described separate from each other and will be compared later in this essay.

How the running and controlling goes, vary on different municipalities, depending how the organization is constructed and what is being prioritised. There exist laws and directives which the businesses have to follow, but beyond this the organisations are quite free to prioritise and to decide what the best is for the community as a whole unit. The municipality has access to different tools which purpose is to help them running the organization as good as possible, so they can create a well-operated business. This is very important, regarding that the tax money should be spent in an effective way, and be able to do so it is required good and well-functioned system of control.A big change has happened when the instrument BSC (Balanced Scorecard) was introduced in certain municipality. In this essay the focus lies on two municipalities, Vellinge and Kristianstad.

It is sixty years since Sweden's first star-shaped housing estate was built in Gröndal, a suburb of Stockholm. Olle Engkvist, the building contractor, was the driving force behind the residential area and it was designed by architects Sven Backström and Leif Reinius. The estate comprises detached star-shaped houses suited to a more hilly terrain and terraced star-shaped houses on the flat land. The eight gardens of the terraced houses form the shape of a hexagon. It is these gardens, designed by Sven Hermelin and Per Friberg, which are the main focus of this thesis. The buildings on the estate have recently been renovated and it is now time for the gardens to be restored.

The aim of this master´s thesis is to explore how a library through it´s spatial distribution expresses, and is an expression for, a view of knowledge. This is done by an analysis of the Orkanen library at Malmö Högskola. Questions posed in this study are: What view of knowledge is mediated through the spatial system and in the shelving of books? What view of learning is expressed in the spatial distribution of functions and artefacts?The theoretical framework of this thesis has two fundamental features. One, which focuses on theories of social space, a part that is mainly influenced by the theories of space syntax.

This degree theme work aims to evaluate the present ICC-profile and printing ink of Dalarnas Tidningar AB. The companyhas changed printing ink quality and wants to evaluate how the present ICC-profile work with the new printingink. Four different ICC-profiles were included in the comparison.One test printing was accomplished with two different separations. Two new ICC-profile was created, as a comparingmaterial. An densitometer was used to measure the technical parameters of the printing.

In modern military operations the requirements of transmitting large amounts of information have increased substantially during the last decade. This increases the demand for high-capacity radio networks. It is also very important that military decisions are made on recent and correct information and this implies that low and known delays are required. The existing military radio ommunications, within the Swedish army, do not meet the requirements for capacity and delay. We have investigated how the capacity and average delay can be improved in an Ad Hoc network with STDMA by using antenna arrays.

The purpose of this thesis is to collect knowledge of techniques and materials for planning roofgardens. Gardens built on top of buildings is not a new phenomenon, already in the beginning of the century architects were experimenting with roofgardens. During the Modern Era roofgardens appeared as a part of the design and worked well together with flat roofs and the ideas of light, air and greenery. Today the most common kind of roofgarden is on a ground-level joist that hides parking or other underground functions. The most important difference between planning a roofgarden and a garden on the ground is the limitation of the load of the roofgarden. Plants, paving-material and equipment must be chosen with this in mind. A light and thin layer of soil demands plants with small needs for water and nutrition.

In East Africa live two species of Griffon Vultures; Rüppel?s Griffon Vulture (Gyps rueppellii) and African White-backed Griffon Vulture (G. africanus). One of the apparently most important factors limiting the population of these birds is food supply. Griffon vultures nest for eight months of the year, and are during this period geographically tied down to the nesting place.

Introduction: It is recommended to place all the vacuum tubes directly on a sample cradle after vein puncture to prevent analytic error. This recommendation is not always easy to follow because the samples are taken by different professionals under different situations.  The three most common analyses, platelets count, haemoglobin and prothrombin time were tested.  Therefore, it was interesting to compare results from the three most common analyses with or without sample cradle, to evaluate the influence of this step on the result. Methods: Three analyses were preformed, using blood from 50 different persons. Each person gave two vacuum tubes, each contained 4.5mL of venous blood for the study.

By using industrialized building, pre-installed modules can be delivered to the construction site where they are easily mounted. This method has many advantages compared to on-site manufacturing, for example, the precision during the production process should be much higher than building each wall and floor on site. Furthermore, the quick erection procedure when using prefabricated elements and the possibility to use weather protection has the advantage of not being dependent on weather conditions, and many other factors.Masonite Beams AB is a Swedish company (a member of the Norwegian company, Byggma ASA) with a relatively new technology using light weight beams as bearing elements in the walls and a certain stiff board lamella slap which is mounted on the top of the floor structure creating an integrated stiff beam / board floor structure. The elements are flat which make it much easier to transport the elements from the factory to the building site where the building parts are easily mounted with special mounting stud.One of the main drawbacks of lightweight structure is the sound transmission. The main topic is low frequency annoyance, however the complex structural elements and their mutual sensitive connections other acoustical problems might appear.

This report deals with handling and interim storage of soils which are planned tobe reused in construction works. The types of soils that are dealt with are gravel, topsoil and sand. The thesis work has been carried out in collaboration with Skanska Sverige Väg och Anläggning Sydost. The main goal is to find an area for using to store soil in between projects.Studies of laws and regulations regarding exploitation and storage of soil has led to a theoretical background upon which the report is based. Background informationhas also been gathered in meetings with the employees at Tekniska Kontoret and Länsstyrelsen in Jönköping.On the basis of literature studies results, a general template has been developed for which desirable properties a possible location should meet.The model was applied to find a number of possible options in the vicinity of Jönköping.

In East Africa live two species of Griffon Vultures; Rüppel?s Griffon Vulture (Gyps rueppellii) and African White-backed Griffon Vulture (G. africanus). One of the apparently most important factors limiting the population of these birds is food supply. Griffon vultures nest for eight months of the year, and are during this period geographically tied down to the nesting place.

Mek Stans 07 is a machine developed for Tetra Pak in Lund as a 10p candidate theses project at Halmstad University. The commission behind the project involved development of a machine that punches holes in packages for the inspection division at Tetra Pak. The task for the machine was to facilitate the process of making openings for testing in the company?s other equipment. Researches on different methods of cutting, types of automatization and possible designs were made. To implement the project a design and construction from the base where chosen.