The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.

Det debatteras inom psykoterapiforskningen om hur förändring går till. Accep-tans beskrivs av två relationella teoretiker, Safran och Muran (2000), som hjärtat i psykoterapi. Acceptans tycks inte ha studerats som common factor inom psykoterapiforskningen. Frågeställningarna är: Hur kan förändringsproce-ssen beskrivas i psykodynamisk psykoterapi med hjälp av begreppet acceptans? Har patienterna nått en ökad acceptans, vilken slags acceptans ar de uppnått och hur hänger det samman med förändring? Framträder acceptans i intervjuer-na på ett sådant sätt så att man kan se det som en common factor av betydelse?  Arbetet har en kvalitativ ansats där intervjuer med sex vuxna som genomgått långtids psykoanalys eller psykodynamisk terapi analyserades med tematisk analys.

The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.

This thesis has been conducted at Saab Bofors Dynamics AB. The purpose was to investigate if a non-linear missile model could be stabilized when the optimal control signal is computed considering constraints on the control input. This is particularly interesting because the missile is controlled with rudders that have physical bounds. This strategy is called Model Predictive Control. Simulations are conducted to compare this strategy with others; firstly simulations with step responses and secondly simulations when the missile is supposed to hit a moving target.

The environmental debate is more intensive than ever before and the demands on companies increase. There are a number of methods to make it easier for the companies to fulfil the demands. Life Cycle Assessment (LCA) end ecodesign are some of the methods that can be used. Syntronic AB has the possibility to reduce the products´ environmental impact in the design phase. Therefore it is important for the company to make it possible to visualize the negative environmental impacts a product can cause in an easy way. It is also important to visualize for there clients if any improvement is possible. The purpose of this thesis is to develop a simplified model.

Today small metal parts are mass-produced as for example rollers in cylinder bearings. At high velocity cutting the metal is cut with a great force in a scissor-like device. Both precision and repeatability is important to be able to guarantee good quality, but from an economical point of view it is also important to keep a great manufacturing capacity. The part of the process that is most time consuming is when the metal bar, that is about to be cut, is fed to the right position. Therefore it is interesting to examine if the time used for positioning can be reduced.

This thesis intends to analyse conditions for a successful implementation of consociational democracy, as a democratic model in Afghanistan. The lack of critical reviews regarding the democratisation-process in Afghanistan initiated the purpose of this study.Lijpharts democracy model was used as the basis in the comparative study. Along with empirical evidence regarding how the complex process of democracy in Afghanistan is progressing, the study investigated whether the identified conditions occurred or not.The choice of which democracy model to use can be crucial for the democratic possibilities to even survive and become established in conflict-affected communities. The principle of consociational democracy is that it is an empirically based normative model that aims to organise the state in a way that works against the risks of majority domination and oppression against the minority.The empirical case study revealed that a majority of the conditions were not met, which then can counteract the possibilities for consociational democracy in Afghanistan. The study has critically examined the prospects for the success of consociational democracy in Afghanistan, and it can be assessed that there is a limited probability for a successful applying of this model..

Objective: For a long-term and viable economic development to take place in a country it needs to promote creativity and innovation in enterprises. The study applies the process model to study the process of innovation in innovative companies in Sweden. The study also applies the technology commercialization model to indicate the ability of companies to commercialize the technology to the market.Main purpose: The purpose of this work is to study how companies in Sweden proceed with an idea generation and if they manage to commercialize these ideas.Method: This study used a qualitative approach. Multiple case studies & interviews.Conclusion: The innovative ideas in innovative SME:s in Sweden is emerged from randomly events and from systematic developments. Consumer chock is the trigger who draws focus on the idea.

From 1710 to 1713 the plague raged through the Swedish province of Scania. Other studies have been made on how the disease affected the society during the epidemic. This study tries to focus on the recovery afterwards. How did the population and the farmsteads recover after the plague? Statistics from parish registers and cameral records show interesting patterns in the demography, and that the recovery was far from complete 1720.

It has been even more important in the forest sector in recent years to look at the whole chain from suppliers to end users, to improve operations and improve performance and the profits of the company. The research and development have been concentrated on the buyer?s market and product development, probably because this research has capability to give an increased cash flow. But to obtain stability and continuity in the production and selling units, the suppliers should also be investigated. The aim of this thesis is to study a one company's existing suppliers of roundwood and investigate the differences and attitudes they have about the company offerings.

The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.

The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.

This essay was to investigate what self-image public libraries convey on Facebook and what image is received by the users, along with comparison of those. It was investigated if the received image corresponded with the users? previous image of public libraries. The method used was interviews with the Facebook administrators and surveys with the users. The theoretical framework was Kotler?s model for image creation.The research is mainly American and shows Facebook as an accepted marketing tool for libraries among students, but as not taken seriously by the library staff.

This thesis work is the last part of the Master of Science education inmechanical engineering at KTH, Stockholm.The aim of this project was the development of a Multi-zone modelfor NOxformation in Diesel engines. Because of the stringent emissionlegislations, great effort is made to decrease the fuel consumption and theharmful emissions of internal combustion engines. Computer simulationsplay a decisive role in this context because they substitute the expensiveand time-consuming laboratory tests.The model is based on a multi-zone approach and uses the wellknownExtended Zeldovich Mechanism which gives a relation to calculatethe NO formation rate using the concentration of different gas speciesinvolved in the process.All the most important phenomena involved in the Diesel combustionhave been modelled. A special attention is then paid to the equilibriumconcentration calculation; this is a significant part of the model whichstrongly influences the following steps.A Simulink model has also been developed. This second version isbased on the previous model and it is made especially to allow theconnection with other external softwares, GT-power in this case.

Listed corporations achieve effectiveness through segmentation of investors. Categorization of like- minded investors diminishes goal incongruence. This thesis aim to examine an Investor models accuracy, provided by a Professor Emeritus in Economic Psychology in 2001. This model segments investors as active, passive, speculative and naive investors. This thesis has a demarcation to private investors on the Swedish stock market. It has a deductive and qualitative approach as the purpose is to study the Investor model.