AbstractIt is important to choose which spare parts to keep in stock. With the right spareparts in stock the costs for inventory and production loss will decrease. Cavalieri et al. (2008) highlights that the balance between inventory cost and production loss is underestimated.  It affects the company and must be considered before decision on purchase.The problem with spare engines is that they are all more or less critical for the production. That can be a reason for why no previous research targeting engines and classification of with engine should be kept in stock has been found.

The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.

The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.

This thesis has been carried out in autumn 2009 at Uppsala University for Boliden Mineral AB. Physical modelling has been used to model a comminution circuit. The model has then been linked to a PLC.When a concentrator is about to become operational Boliden Mineral AB have been looking for a way to test the PLC. The purpose of this report has therefore been to develop models for the subprocess in a concentrator and link these models to the PLC. The subprocess was a comminution circuit in Aitik36.

Portable IT devices such as laptops, smart phones and computer tablets are becoming ever more ubiquitous. At the same time, the population of the Western world is growing older, with aging bringing about changes with regards to individuals' physical and mental capabilities. These facts raises important questions about how well suited these devices are for use by elderly people. This study focuses on the cognitive aspects of the devices' usability, using the concept of mental models to analyze the users' understanding of a computer tablet. It also draws upon theory of graphical user interfaces in its analyses.

The wild boar Sus scrofa population in Sweden has increased rapidly in the last decades which has led to conflicts among stakeholders, for example due to crop damages in agriculture. Thus, there is an urgent need of quantified goals and effective strategies for wild boar management. To develop such strategies, knowledge on population dynamics is fundamental. In this study a deterministic matrix model was used to estimate population growth, based on previously published data. The exponential growth rate for a wild boar population was calculated to 1.48.

ABSTRACT Title: the Power distance star ? A study on how cultural power distance affects the business relation between Japanese and multinational companiesLevel: Final assignment for Bachelor Degree in Business AdministrationAuthor: Therese Elofsson and Anna NyströmSupervisor: Jens Eklinder Frick and Jonas MolinDate: 2015 - JanuaryAim: The purpose of this study is to compile available research regarding the cultural aspect power distance, as it is being displayed and handled in business-relations between Japanese and multicultural business contacts. The culture in Japan differs from the culture in the western world and several companies testify that the Japanese market is difficult to act and expand upon. This study aims to provide explanations to these difficulties from a power distance perspective.Method: This study has compiled the theoretical knowledge and research in a model called ?the Power distance Star? (Figure 1), which is created and designed for this purpose.

The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.

The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.

The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.

This thesis has been conducted at Saab Bofors Dynamics AB. The purpose was to investigate if a non-linear missile model could be stabilized when the optimal control signal is computed considering constraints on the control input. This is particularly interesting because the missile is controlled with rudders that have physical bounds. This strategy is called Model Predictive Control. Simulations are conducted to compare this strategy with others; firstly simulations with step responses and secondly simulations when the missile is supposed to hit a moving target.

The environmental debate is more intensive than ever before and the demands on companies increase. There are a number of methods to make it easier for the companies to fulfil the demands. Life Cycle Assessment (LCA) end ecodesign are some of the methods that can be used. Syntronic AB has the possibility to reduce the products´ environmental impact in the design phase. Therefore it is important for the company to make it possible to visualize the negative environmental impacts a product can cause in an easy way. It is also important to visualize for there clients if any improvement is possible. The purpose of this thesis is to develop a simplified model.

The last decade has created an increasing pressure on companies to decrease their impact on the environment and to increase their effectiveness of recycling the company?s resources, especially for the steel industry. Companies have also started to realize the economic aspects of an effective internal reverse logistics. In the past the value of an effective internal reverse logistic was something that companies tend to underestimate and there are few academic studies done in this area. The purpose of this essay has been to identify key factors to create an effective in plant storage, transport, sorting and handling of returned steel. From these factors a generalized model for creating an effective return steel flow will be developed.

This thesis intends to analyse conditions for a successful implementation of consociational democracy, as a democratic model in Afghanistan. The lack of critical reviews regarding the democratisation-process in Afghanistan initiated the purpose of this study.Lijpharts democracy model was used as the basis in the comparative study. Along with empirical evidence regarding how the complex process of democracy in Afghanistan is progressing, the study investigated whether the identified conditions occurred or not.The choice of which democracy model to use can be crucial for the democratic possibilities to even survive and become established in conflict-affected communities. The principle of consociational democracy is that it is an empirically based normative model that aims to organise the state in a way that works against the risks of majority domination and oppression against the minority.The empirical case study revealed that a majority of the conditions were not met, which then can counteract the possibilities for consociational democracy in Afghanistan. The study has critically examined the prospects for the success of consociational democracy in Afghanistan, and it can be assessed that there is a limited probability for a successful applying of this model..

From 1710 to 1713 the plague raged through the Swedish province of Scania. Other studies have been made on how the disease affected the society during the epidemic. This study tries to focus on the recovery afterwards. How did the population and the farmsteads recover after the plague? Statistics from parish registers and cameral records show interesting patterns in the demography, and that the recovery was far from complete 1720.