Constantly growing demands from the costumers in the Automotive industry forces the subcontractors to seek alternative ways to compete. One parameter of quality is the components tolerance against NVH(Noise, Vibraion & Harshness) aspects. Kongsbergs Automotive has developed a new gear shifter platform (Shift-by-Wire) that is sold to Alfa Romeo and used in of their car models. However, the company is not pleased with the components sound quality, therefore the main purpose of this thesis is to develope a number of concepts that is supposed to enhance these NVH-aspects.To get an understanding of the problem an analysis of the causes of the emitted sound has been done parallell to a product decomposition, function decomposition and a Ishikawa-diagram. Together with these methods has a litterature study been performed to get familiar with the physics of an impact and especially the emittment of noise.

To be able to measure high-surge voltages and transients with short rise times youneed measuring instruments with a high sampling frequency and large Bandwidth.These surges and transients occur primarily at lightning but can also occur at forexample at connecting errors at an electrical switch-gear. This report describes thework with finding two solutions for measuring and log data from these surges andtransients. One temporary solution where a measurement program has beendeveloped. A second solution where different company solutions have been analyzedto decide which fits best. For these measurement solutions two solutions for bringingdown the voltage has been used.

Husaberg Scandinavia AB is a company producing and developing a range of motorcycles for both on- and off-road use. Husaberg provided the project group with a task of developing an entirely new way of operating the sequential transmission that can be found in today?s motorcycles. The target was to bring the product from idea to a functional prototype ready for further tests. Operation of the motorcycles transmission is today made by a foot pedal placed on the left hand side of the bike.

To be able to measure high-surge voltages and transients with short rise times youneed measuring instruments with a high sampling frequency and large Bandwidth.These surges and transients occur primarily at lightning but can also occur at forexample at connecting errors at an electrical switch-gear. This report describes thework with finding two solutions for measuring and log data from these surges andtransients. One temporary solution where a measurement program has beendeveloped. A second solution where different company solutions have been analyzedto decide which fits best. For these measurement solutions two solutions for bringingdown the voltage has been used.

This paper deals with the early mesolithic sites in Gladö, a part of Hanveden situated south of Stockholm. It tries to explain the big amount of sites, why people came to these islands and what they were doing there. The large shore displacement together with the topography of the mesolithic islands resulted in a rapid change of suitible areas for camping. The prime occupation was sealhunting on the ice of the Ancylus lake in early spring. As the archipelago became larger other activities as fishing and birdhunting got more important and people stayed for longer periods..

To be able to measure high-surge voltages and transients with short rise times youneed measuring instruments with a high sampling frequency and large Bandwidth.These surges and transients occur primarily at lightning but can also occur at forexample at connecting errors at an electrical switch-gear. This report describes thework with finding two solutions for measuring and log data from these surges andtransients. One temporary solution where a measurement program has beendeveloped. A second solution where different company solutions have been analyzedto decide which fits best. For these measurement solutions two solutions for bringingdown the voltage has been used.

This report is regarding an electrical installation of an alarm system on a post fishingboat called Andromeda. The background of the installation was an earlier andinadequate alarm system that led to a motor failure. The ship was taken out of serviceand was sold to Björn Magndahl who rebuilt it to a yacht.The project was conducted partly by developing the existing systems, partly bydocumenting the work by means of electrical blue prints. Except the alarm systems, aninstallation of the frequency control unit for the bow thruster was installed.The installation was working fine and the outcome of the documentation was handedover in a form of a binder during the test drive of the systems and the assignment wasapproved..

Effects of fishery closure on perch was detected as female perch was on average 5 cm longer in closed areas compared to non-closed areas. This could be a result of larger individuals surviving as an effect of reduced fishing. No effect was detected on the reproduction rate of YOY (young of the year) perch.A zooplankton survey revealed less amounts of the most important plankton groups for YOY perch in areas with failed reproduction, though the difference was statistically insignificant.The distribution of YOY perch and YOY/adult stickleback differed completely in this study with no area where the two species are both present. It is sketchy to draw any conclusions from this data but it remains a field for further investigation.The reproduction problem is concentrated to the outer parts of the archipelago which confirms previous studies of the geographic extension..

"Anders Andersson had a fire in his tar-kiln ". Analysis of Jonas Åström 's peasant-diary 1868-1891 Peasant diaries are notes written by farmers, crofters and other people connected with small-scale agriculture. The notes give unique information about diverse aspects of rural life, for example, personal relationships and work, travel and regularity of church attendance. One such diary was written by Jonas Åström who lived in the county of Västerbotten, Sweden. The main aim of this study is to describe the work done by farmers in the 19th century, focusing on their use of forest resources, as recorded in his diary.

The following study aims to investigate the environmental conditions of the harbor of Sk?rhamn, a small fishing community on the west coast of Sweden. The interest to do so rose as a newly built apartment residence failed to connect the sewage pipes of 18 apartments, causing the untreated sewage running into the sea. The parameters accounted for are the C/N ratio, total organic carbon (TOC) as well as total nitrogen present (TN) and ?13C in the top ten centimeters of a sediment core retrieved in the Sk?rhamn harbour.

The aim of this study was through applying a new perspective reach the people who during medieval time lived and worked on the farm. On the basis of my previously study and a gender perspective this study have compared general literature with local and then interpreted the farm from a local context. The questions raised here concerns division of work and spatial distribution on the farm as well as local impact on gender constructions.This study resulted in interesting problems within the archaeology itself but also in significant details about the farm. No gender restrictions could be seen in the houses except in Hus 1 were a smaller space, which probably used as storage or a workshop had been restricted tomales. Instead the buildings social space mainly consisted of a mixed gender environment.

There are five endemic populations of migratory Atlantic salmon (Salmo salar, Salmonidae) and brown trout (Salmo trutta, Salmonidae) remaining in Lake Vänern, whereof two are salmon and three are trout. There is one population of each species in Klarälven, also one of each in Gullspångsälven and there is a population of trout still remaining in Tidan River. Since the beginning of the 20th century endemic populations of salmon and trout have either vanished or declined dramatically due to the construction of hydropower in the rivers around the lake, and still today the future of the remaining populations remains uncertain. To manage salmonid fishes effectively more knowledge of their ecology throughout their different life-stages is needed. A large part of the Lake Vänern salmonoids lives are spent in the lake, where a mayor mortality factor is recreational fishing, especially angling.

During an excavation at Old Uppsala 571 raw garnets was found. In comparison with similar fragments from other sites in Sweden my aim was to prove a completely domestic production of garnets for cloisonné work. I have chosen to look at the archaeological sites of Old Uppsala, Valsta, Slöinge and Paviken and more closely at the material from Old Uppsala and Valsta. My theoretical framework has been to look at the garnets own agency in the contemporary society.Garnet cloisonné was a popular jewellery form during the Merovingian period on the continent although it came to an end in the early 7th century. It was during this time in Scandinavia a new sort of garnet, technique and paste was introduced and the garnet cloisonné was profoundly used for the gear of the elite and ritual objects.

When models are used to describe physical phenomenon during development or modification of a technical system, it is often possible to reduce both the time needed and the overall development cost. With the use of models it is also possible to investigate the potential of the selected solution, without the need for any expensive details and testrigs. In many cases it is also not possible to test all the aspects regarding the functionality that are desired from the system, without using the complete and final product.In this case a model based approach has been used to optimize the different parameters in the new snubbing mechanism for the Nose Landing Gear Retract Actuator on the JAS39 Gripen.During the simulations, upper and lower boundaries were calculated for the length of the spring and the diameter for the restrictor. The governing constraints were given by the requirements for the retraction time during cold conditions and that the amplitude of the alternating loads in the uplock mechanism were brought to an acceptable level.The most promising results from the simulations were then used in a limited number of trials in the hydraulic rig to verify that the configurations comply with the requirements.The final parameters for the snubbing mechanism were chosen to 35±1mm for the spring and 0.4-0.5 mm diameter for the restrictor..

In this thesis work a Geographical Information System (GIS) based methodology to identify locations suitable for the installation of wave energy converters has been developed. Parameters of importance have been identified and a GIS-database has been set up, containing data about the marine environment. In a case study of the Swedish west coast the methodology has been applied, resulting in a number of maps showing possible areas. The results show that large areas are suitable for installation of wave energy converters, from a technical and economical point of view. When consideration is taken to other interests in the area, such as navigation, fishing and environmental protection, the size of the suitable area diminishes considerably.